View Cart
Jack Mounting Bracket for Fulton Marine Jack

Jack Mounting Bracket for Fulton Marine Jack

Item # P9012-00

lowest price pledge

Retail:$23.31

Our Price: $16.62

You Save: 29%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.71 lbs

Quantity: 
In Stock, Ships Today
Jack Mounting Bracket for Fulton Marine Jack Mounting Brackets,Hardware P9012-00
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Trailer Jack
  • Camper Jack
  • Mounting Brackets
  • Hardware
  • Fulton
Call 800-298-8924 to order Fulton accessories and parts part number P9012-00 or order online at etrailer.com. Free expert support on all Fulton products. Guaranteed Lowest Price and Fastest Shipping for Jack Mounting Bracket for Fulton Marine Jack. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (17)
  • Q & A (73)
  • Videos (1)
  • Photos
  • Why etrailer?

Fulton Accessories and Parts - P9012-00


Features:

  • Fits Fulton Bolt-Thru Swivel Marine Jack with Caster (FXP10)
  • Measures 3" on bolt hole centers



P9012-00 Fulton Jack Mounting Bracket






California residents: click here


Video of Jack Mounting Bracket for Fulton Marine Jack


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Fulton - Trailer Jack,Camper Jack - P9012-00

Today we're gonna take a quick look at the Jack Mounting Bracket for Fulton Marine Jacks. This is going to allow you to weld on that marine jack onto your trailer, we'll have this tab at the top so we can get that welded on nice and securely. We'll also get our lock nut, and washer, or spacer for our jack to be mounted onto the bracket.Now the distance between our mounting holes is going to be three inches, going from center to center. And that's going to be the same in both directions there. Our tab at the top for welding, is going to be about two and a half inches wide. And about three quarters of an inch long, going from where the bracket ends here, so what would be actually available to you overlaying on the trailer.

That would be the overhang going on your trailer there.Our bracket overall is going to be about four and a half inches wide, and four and a half inches tall. Now again, this is going to work with your Fulton Bolt Through Swivel Marine Jack, as well as a couple of the other Fulton Marine Jacks. So you can definitely pick those up here at etrailor.com, as well as a lot of replacement parts for any of those jacks, either the gear kit or anything else like that. So definitely check out etrailor.com for any of your jack needs.And that's gonna do it for our look at the Jack Mounting Bracket for Fulton Marine Jacks.


Customer Reviews

Jack Mounting Bracket for Fulton Marine Jack - P9012-00

Average Customer Rating:  4.8 out of 5 stars   (17 Customer Reviews)


- P9012-00
by:

Great product, Great Service and fast shipping . 546412



- P9012-00
by:

Product was exact fit but. Needed bolt on style not welded return process was a snap very happy with customer service , would purchase more products thanks 559354



- P9012-00
by:

It's the right thing,thank you. 548960



- P9012-00
by:

Excellent upgrade for my utility trailer,can't say enough good things about trailer thanks again 488146



- P9012-00
by:

Fast shipping, Arrived on time, Part was welded on trailer and is functioning well! 472539



- P9012-00
by:

Product discription was spot on, mounting bracket fits well on the Fulton 1200lb trailer jack 450879


Comments

Tongue Jack bracket working great!

Tim P - 11/10/2018

45608

- P9012-00
by:

Thanks. Sent me exactly what I needed 450871



- P9012-00
by:

nice product 438507



- P9012-00
by:

Everything came on time and intact. Cant wait to weld it on my trailer! 337361



- P9012-00
by:

Excellent item thank you. 263007



- P9012-00
by:

This part was exactly as described & exactly what I needed to re-purpose our boat jack over to our utility trailer. Simply welded to the trailer & we were good to go. What I really appreciated was the exceptional communication & customer service from George J. at etrailer. The part was back-ordered from the manufacturer for a few weeks & George kept me apprised of the ship dates. I have yet to experience better service on the net. THX George! 242961


Comments

Works great... I am very pleased!

Bob B - 04/05/2017

23057

- P9012-00
by:

Well build product. Had a new jack but didn't have the mount to weld on. I checked a lot of different sites to find this and This was the best price and the only place I could get it in under 2 months. 241443


Comments

works great,very solid mount

Rich S - 03/23/2017

22950

- P9012-00
by:

Verry helpful service I received my order within 2 days thank you 235976



- P9012-00
by:

Worked as designed. 232248



- P9012-00
by:

Product shipped without the spacer or nut, called support and they confirmed the supplier shipped it to them wrong. Sent me a kit that included the nut, spacer, and bolt. Very happy with how quickly this was resolved. Very sturdy. 159983



- P9012-00
by:

Product looks good. Quick shipping, tha nks 109286



- P9012-00
by:

I was ready to buy a new Jack until I talked to your tech dept. The bushing that came with the kit was all that was needed. The jack is now like new, does not rattle or shake and cranks with ease. Thanks!!! 94565


17
17

Ask the Experts about this Fulton Accessories and Parts
Do you have a question about this Accessories and Part?


  • Recommended Replacement Jack for Shelby Trailer Jack
  • The Fulton Bolt-Thru Swivel Marine Jack # FXP15W is a bolt through replacement option for you. This is designed to use a welded plate like the Jack Mounting Bracket for Fulton Marine Jack # P9012-00. It appears like you have a bolt that goes into a threaded plate, so the reverse of this assembly. If that is the case, I believe this jack will still work, but you will need to put the bolt through the jack first and then thread the bolt once behind the jack into the welded plate.
    view full answer...

  • Replacement 1200 Pound Fulton Boat Trailer Jack
  • From the pictures you sent in the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 is the type of jack you're looking for. The mounting plate that is welded to the trailer, part # P9012-00, looks to be fully intact. You may need new hardware though, part # F0933325S00.
    view full answer...

  • Mounting Bracket for Fulton XP15 Trailer Jack
  • You'll only need to order one part to mount your Fulton Bolt-Thru Swivel Marine Jack # FXP15W, and that is the Jack Mounting Bracket for Fulton Marine Jack # P9012-00. The accompanying photo shows the dimensions of the bracket for reference.
    view full answer...

  • Replacement Swivel Jack For 2003 185 Searay Bowrider With Shorlandr Trailer
  • Your current jack is an interesting hybrid. It is a bolt-on receiver with a bolt-thru swivel. Normally the bolt-thru jacks have a welded on plate to attach to. For the jack replacement, I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301. This is the highest capacity jack with the bolt-thru option and a caster wheel on the bottom. It has a zinc plating for corrosion resistance and has a 6 inch thermoplastic wheel included. It...
    view full answer...

  • Fulton Jack Recommendation for Triton Dual Axle Boat Trailer with Weld On Fulton Jack
  • Sounds like you'd need a Fulton jack like the part # FXP100W0301 which is a weld on style jack like what you have that would attach to a bracket like part # P9012-00 that you'd have installed on your trailer most likely. You can send me pictures if you like and I'll take a look and see if there's something else that would work better. Sticking with a Fulton jack though will allow you to reuse the bracket you have installed instead of having to remove what you have and install a new one.
    view full answer...

  • Replacement Trailer Jack to Fit the Mount for a Shelby 5658A Swivel Jack
  • How did your jack attach to its mounting bracket? Is that the single bolt that you mentioned? If so then the only option we have that could work is Fulton jack # F1411300301 which normally uses mounting bracket # P9012-00. And the replacement hardware for that bracket is # F0933325S00. The bolt is a 1/2 inch but it uses that included bushing in the center hole of the mounting bracket.
    view full answer...

  • Replacing a Shelby 1,000 lbs Trailer Jack With a Similar Fulton Jack
  • Since we do not have a Shelby jack mounting bracket that goes to the discontinued Shelby Jack # 5876A8, I have no way to confirm whether or not a Fulton jack will fit it. With that being said, the Fulton Bolt-Thru Swivel Marine Jack # F1411300301 is almost identical to the Shelby Jack # 5876A8 that was referenced. It has a 10 inch lift, is rated for 1,500 lbs, has an extended bracket height of 24-3/4 inches, and will mount to a 3 x 5 trailer frame. The Fulton Mounting Bracket that...
    view full answer...

  • Mounting Bracket for Fulton Bolt-Thru Swivel Marine Jack
  • Thank you for your purchase! If your Fulton Bolt-Thru Swivel Marine Jack # FXP15W does not correctly fit your mounting bracket you will need to replace that bracket with the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 which attaches to the jack.
    view full answer...

  • Difference Between Snap Ring and Bolt On Boat Trailer Jacks
  • A boat trailer jack that uses a snap ring works differently than one that is a bolt-on, like yours, because the mounting bracket for a bolt-on jack and snap-ring jack will be different. Because you have a Fulton 1,200 lb bolt-on jack, I assume your mounting bracket that is welded on accepts a bolt, like part # P9012-00. If this is the case you are going to want a compatible, bolt-on jack, which is the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. This jack has a 1,200 lb capacity,...
    view full answer...

  • Recommended Mounting Bracket for Bulldog Round Bolt-Thru Swivel Jack
  • For the bolt-on or weld-on bracket to fully install the Bulldog Round Bolt-Thru Swivel Jack # BD154102 to your trailer, you will use the Jack Mounting Bracket # P9012-00. This can be either bolted to or welded on your trailer frame for use with the Swivel Jack. I have attached a short video demonstration and the installation details for you to check out.
    view full answer...

  • Recommended Replacement for Fulton Magnum Series 1,500 Pound Trailer Jack
  • To replace your older Fulton Magnum Series 1500 Pound Jack, I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15W. This 1,500 pound swivel jack is what Fulton replaced the Magnum Series with, so it should use the same mounting design as your existing unit. It fits the Jack Mounting Bracket # P9012-00, for which I have attached an image with the dimensions labeled. You can compare this to your current welded plate to see if it matches. The Fulton Bolt-Thru features a corrosion-resistant...
    view full answer...

  • Is Replacement Hardware Available for Fulton Magnum Series Jack?
  • I do not see something we carry that would be an exact replacement. If you can give me your jack's model number it would help me find if we have something that will work for you because the replacement mounting brackets match up to certain manufacturer and models of jacks.
    view full answer...

  • Installing Replacement Fulton Marine Jack
  • Using Loctite # LT37420 on the bolt from hardware kit # F0933325S00 to install your new Fulton Bolt-Thru Swivel Marine Jack # FXP15W isn't usually necessary but it's not going to hurt anything. If you feel it's necessary you can use the new bolt and re-weld or replace the mounting bracket # P9012-00.
    view full answer...

  • Recommendation For a Weld-On Replacement Jack For Boat Trailer
  • I did some research and it looks like your current Shelby jack had a 1,000-lbs to 1,500-lbs weight capacity with a 10 inch lift. For a similar jack that is weld-on, I recommend the Fulton XLT Bolt-Thru Swivel Trailer Jack, Item # F141132. This Fulton jack swivels and is great for marine use. It mounts to 3 inch x 3 inch, 3 inch x 4 inch, and 3 inch x 5 inch trailer frames. It has a 12 inch lift and a weight capacity of 1,500-lbs. If you need the weld-on mounting bracket and hardware...
    view full answer...

  • Loose Fulton Magnum Series Swivel Trailer Jack on 2002 Ranger Boat Trailer
  • Your best bet is going to be hardware kit # F0933325S00. The bolt is a 1/2 inch coarse threaded bolt with matching nut and bushing. But it sounds like the nut or bolt is backing out on your assembly. This could mean the lock washer is shot. You could obtain one locally or use some blue Loctite # LT37643 to prevent it from backing out. Do you notice any damage to the assembly? Or is the hole where the bolt goes through starting to get egg-shaped or otherwise misshapen? If so then that...
    view full answer...

  • Replacement Fulton Bolt-Thru Pull Pin Tongue Jack for Triton Boat Trailer
  • The 1500-lb-rated Fulton Bolt-Thru Swivel Marine Jack # F1411300301 is a great choice to replace your Triton trailer's jack. You just want to make sure your jack mounting plate looks like part # P9012-00 which provides a bolt-thru installation. If you need a replacement bolt kit use part # F0933325S00.
    view full answer...

  • Bolt-On Trailer Swivel jack that Mounts to a Trailer Using 1 Center Bolt
  • The Fulton jack # FXP15, is not meant to be mounted through the center bolt. It is designed to use the included mounting hardware that fits around the trailer frame. This will allow it to operate correctly and support the weight it is rated for (1,500 pounds). You can use the Fulton jack, # FXP15W. This unit requires a mounting plate, # P9012-00, that welds to the trailer frame.
    view full answer...

  • Recommendation for a Weld-On Trailer Swivel Trailer Jack with Wheel for Boat Trailer
  • It looks like the jack on the trailer is a Reese swivel jack. The Fulton jack you referenced # FXP15W, should fit in its place no problem. Fulton and Reese are sister companies. However, the bolt holes are 3 inches on center. You will most likely have to have jack mounting bracket # P9012-00 welded on by a qualified professional welder since none of the current jacks/mounting plates are 3 x 6 on center. You are correct about a C-channel frame. It is not ideal for a bolt on jack. A weld-on...
    view full answer...

  • Will Fulton Marine Jack Fit Trailer Mounting Plate For Shelby Jack
  • The Fulton jacks are not compatible with a mount used for Shelby jacks. Typically, the Shelby jacks use a mounting plate that is bolted on instead of using a snap-ring like the Fulton Jack, part # FTJ120W0301 uses. We do offer a jack that uses a plate similar to the Shelby mounting plate. It is part # FXP10W0301. This jack has a 1,2000 lb weight capacity and has a 10 inch lift. The plate used for this jack is part # P9012-00. I have attached a photo of the mounting plate with the...
    view full answer...

  • Bolt-Thru Style Swivel Jack Mounting Bracket Compatibility
  • The Bulldog Round, Bolt-Thru Swivel Jack - Sidewind - 10" Lift - 2,000 lbs # BD154102 is compatible with the weld on bolt-thru style mounting brackets like # P9012-00.
    view full answer...

  • Mounting Bracket Recommendation to Attach Fulton Jack # F500349 to Trailer
  • The correct mount for use with the Fulton jack # F500349 that you referenced is the part # P9012-00. You'd need to remove the bracket you have on your trailer and have this one welded in it's place.
    view full answer...

  • Replacement Fulton Snap-Ring Swivel Jack for 2000 MFI Boat Trailer
  • The Fulton Bolt-Thru Swivel Marine Jack # F1411300301 installs on a weld-on mount like # P9012-00 but for a snap-ring pipe mount you'll want to use a jack like # FTJ120W0301. This jack offers a 1200-lb lift capacity and a 6-inch wheel. As a note, the snap ring pilot hole diameter is 2.313-inches.
    view full answer...

  • Replacement Bracket Metal Bushing for Fulton Swivel Jack
  • I may have what you need, however the Replacement Bearing Kit # F500137 referenced in your question replaces inner components of the Fulton F2 Swing-Up Jacks and are not related to the mounting bracket or swing-up feature. It sounds like you are actually needing the Replacement Hardware Kit for Fulton Swivel Jacks # F0933325S00.This fits a mounting plate like the # P9012-00 that it sounds like you have welded to your trailer. It includes the metal bushing/washer that you mentioned.
    view full answer...

  • Can a Bolt-On Swivel Jack be Mounted to the Same Bracket as a Weld-On Trailer Jack
  • You would need to replace the weld-on jack with another weld-on jack of the same type. The bolt on jacks have a different mounting bracket than the weld-on ones. You could use # FXP15W and you may also need bracket # P9012-00 if the old one turns out to not be compatible.
    view full answer...

  • Replacement for Shelby 5764A Trailer Jack on 2000 Four Winns Horizon 180
  • Swapping the mounting hardware on a jack can be done, but it will depend on the specific mounting hardware of the jacks. Shelby jacks and parts are becoming more difficult to locate, so I would recommend replacing your Shelby hardware with something more easily replaceable in the future like the etrailer Marine Jack # MJ-1200B, which has a 1200 lb capacity and 11" lift. If you want to try to match the existing Shelby mounting plate, we do have one jack that may work. The Fulton Bolt-Thru...
    view full answer...

  • Availability of Jack Mounting Hardware for Bulldog Weld-On Jack BD154107
  • The Bulldog Bolt-Thru Swivel Jack # BD154107 is a weld-on installation. It installs using the Bracket kit # P9012-00. We also offer just the nut, bolt and spacer as kit # F0933325S00. You can include either of these along with the jack when you place your order.
    view full answer...

  • Will Fulton Bolt-Thru Swivel Marine Jack Fit the Mount of a Fulton Magnum Series Jack
  • I recently learned that the Magnum series jacks could have a different bolt pattern than the new jacks. Because of this it is not likely a new one will fit on the welded on bracket of the old one. To be safe I recommend adding mounting bracket # P9012-00. The holes are 3 inches apart on center. The bolt is a 1/2 inch coarse threaded bolt that is 1-1/16 inches long. If all that matches what you have then you will not need the new weld-on bracket. If the mount is the same or if you...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Installed by:
Kathleen M
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924