Recommended Maine Trailer Jack for a 2006 Mastercraft X-Star

Question

Question:

please provide details of the drop leg jack as well as a U bolt on style of F2.

asked by: David B

0

Expert Reply:

I have the perfect replacement trailer jack for your 2006 Mastercraft X-Star boat trailer. For this, I recommend using the Fulton F2 Swing-Up, Wide-Track Trailer Jack part # F1413050334.

It has a 1,600 lb. capacity and can raise your boat trailer up to 8". As long as your trailer's tongue does not weigh more than 1,600 lbs. then this jack will work well for you. You will also want to use the Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks part # F500277 to use this jack with your existing mounting bracket.

expert reply by: Conner L

0

click to enlarge

David

8/16/2017

please provide details of the drop leg jack as well as a U bolt on style of F2.

Conner L.

8/16/2017

For a drop leg jack, I recommend using the Fulton Square Fixed-Mount Marine Jack part # FHD2500. This jack is ideal for marine and recreational use. It has a 2,500 lb. weight capacity and can be extended up to 35-1/2" using the drop leg feature and will bolt around a trailer frame up to 3 inches wide by 5 inches tall. For a bolt on jack, I recommend using the Fulton F2 Swing-Up Trailer Jack part # F1413020134. This jack is rated for use with a tongue weight up to 1,600 lbs. It can provide up to 10" of lift and fits trailer frames 3"x3" and 3"x4". The dual wheel feature will allow you to easily maneuver the trailer. I have included a review video of each jack for you.

Answer 1

I went out to our warehouse and measured the 4 holes in the center of the Replacement Bolt-On Mounting Bracket for Fulton XP Series Jacks #F500349, and they measure 3" on center left and right, and 3" on center up and down. The remainder of…

view full answer...

Answer 2

The Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel, Sidewind, Bolt-On - 1,600 lbs #F1413040134 or weld on version #F1413050334 are both available as complete units but there is not a replacement part available for what you are…

view full answer...

Answer 3

I'd recommend the weld-on Fulton F2 Swing Up Jack part #F1413050334 for your Mastercraft trailer. This will give you an easy to use and high quality trailer jack that will last you a long time!

view full answer...

Answer 4

The HitchMate Boat Trailer Step part #HE4036 should fit with a swing up jack depending on where you place the step. The retracted height of the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind part #FXP15L is 26" so you may be able to…

view full answer...

Answer 5

The Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks with 3" x 4" Mount #F500277 is the correct fit for a Fulton F2 jack. You can alternatively use the Replacement Mounting Bracket Kit for Fulton F2 Jacks #F0928059-00…

view full answer...

Answer 6

I have a solution for you, but the bracket height of the Dutton-Lainson Round Trailer Jack #DL22210 has a bracket height of 16-5/8", so it would not be short enough to be used on your trailer. I recommend usinig the Fulton F2 Swing-Up Trailer…

view full answer...

Answer 7

I pulled the Fulton F2 Swing-Up Trailer Jack, part #F1413020134, from our warehouse and took a photo and some measurements for you. This jack has dual 7 inch wheels and features a sidewind handle. The jack has an adjustable mount, and is a bolt-on…

view full answer...

Answer 8

I spoke to my contact at Roadmaster about the RoadMaster 8" Safety Cable Extensions part #RM-910648-8 and they stated that each cable is rated for 8,000 lbs but that does not means it will give you 16,000 lbs in total as if one were to break,…

view full answer...

Answer 9

I just heard back from Demco and their 12" Long Safety Cable Extensions item #DM9523064 are 1/4" in diameter.

view full answer...

Answer 10

We were able to measure for you the Demco Safety Cable Extensions #DM9523064. As you can see by the accompanying diagram, the entire length of the extension is 16-1/4 inches, the cable by itself is 12-5/8 inches and the hook is 4-1/2 inches. I have a…

view full answer...

Answer 11

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Maine Trailer Jack for a 2006 Mastercraft X-Star

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching