1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24920
lowest price pledge
Retail:$207.43
Our Price: $133.72
You Save: $73.71
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock
24920 - 200 lbs TW Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24920 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (103)
  • Q & A (75)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24920

  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Visible Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24920 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60353 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24920 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24920

Average Customer Rating:  4.7 out of 5 stars   (103 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24920
by:
2017 Honda Fit

Easy to install, did need to bend muffler side muffler bracket down a little for proper clearance. Its a good looking hitch receiver. Bike rack works great with it.


Comments
Very well!
Larry Z - 03/15/2021


- 24920
by:

Simple to install and set up, easy to use, durable. I have a lighweight carbon fiber racing bike, but my wife has a heavy e-bike. This Trailer hitch and bike ride easily handles the extra weight of my wife's bike and it's low height makes it a simple task to load a heavy bike. Much better than a roof mounted bike rack!



- 24920
by:
2017 Honda Fit

Draw-tite Sportframe Trailer Hitch Receiver Class I - 1-1/4 Swagman Trailhead 3 Bike Rack - Tilting The Draw-tite Sportframe class 1 trailer hitch and Swagman Trailhead 3 bike rack were ordered for a 2017 Honda Fit. The online order and shipping went just as expected. The trailer hitch and bike rack are very heavy duty. I recommend watching the trailer hitch install video before installing, whereas the video is very helpful. The bike rack has triangles that you can rotate to find the best fit for your bicycle's frame. The rubber straps are thick and secure the bicycles when you pull them tight. This bike rack will stay on the vehicle for 6 months each year. The tilt feature and folding arm feature are must haves for a smaller hatchback. I am pleased with this purchase, it appears to be good quality and good value.



- 24920
by:

I used this to hook up a caddy for my surf fishing cart on a 2018 Honda Fit. Easy to install, although an extra pair of hands would have made it twice as fast. Works great, could not be happier with my purchase! The day after the install I hooked my biggest fish yet from the beach! The hitch adapter has held up well. I go 90 miles round trip to the Alabama Gulf Coast at least once a week, year round. Very Durable...have held up to the sand and salt.


Comments
Still works great! I used it at least once a week...no issues.
Brian C - 04/01/2021


- 24920
by:
2015 Honda Fit

Ordered Saturday, Delivered Wednesday, super fast! Except for the obvious clearance problem installation was pretty straightforward, just read the other reviews for helpful tips. Was a little apprehensive about bending the muffler holders but you really have to, wish I had done it BEFORE I mounted the hitch. Great hitch if you want to use a bike rack for your 2015 Fit, as you can see by my photo, you can barely even tell it's there


Comments
Perfect hitch for my Honda Fit, driven several thousand miles with 2 bikes on my trailer hitch bike rack and have had ZERO problems, 2 thumbs up!
Mike B - 05/27/2016



- 24920
by:
2018 Honda Fit

Easy to install on my 2018 Honda Fit Sport. You won't be towing much weight but it's perfect for bike hitches and lightweight cargo carriers. If you have a 2018+ Sport then you already know that the rear bumper diffuser is a concern with the hitch clearance. It clears it by about 1/2 an inch. Also another concern is the muffler. On the Sport, it will contact the protruding bolt of the hitch when installing. The Fit Sports muffler hanger are both pointed in opposite directions for the 2018 model. It differs slightly than trailer's install video. You will have to bend both hangers slightly up to clear the bolt. It also takes some considerable force. Get someone to help you, but if you're solo, install the middle U-bolt first to support the weight of the hitch. I'm using a Kuat Transfer 1 bike rack with this hitch and it clears the bumper perfectly when folded in its upright position.



- 24920
by:

I was initially a little hesitant about installing my own hitch as I don’t particularly like mechanical work due to the probability of skinned knuckles and frustration due to the intractable nature of metal and the difficulty of reaching bolts underneath a vehicle. Having said that, I found this hitch installation to be quite easy and straightforward. The short installation video was key to this process, it was clear, accurate and tailored to my specific year and model of car. All necessary parts were included along with tips on how to install them- the bolt threading wire was especially helpful and made a difficult step very easy to do. The entire process went very smoothly as I was prepared for each step in the process. I use the hitch to mount a bike rack and it worked well all year, it holds the weight of our 2 bikes easily and sturdily. I was so impressed with the ease of installation that I ordered a second hitch for my daughter’s SUV which she uses to tow her travel trailer



- 24920
by:

Easy to install, works great for Thule bike rack!



- 24920
by:

Had this trailer for a year now and its been amazing! I have a 2019 Honda Fit. I live in the mountains where there are steep grades. I actually use it to haul my trash bins down to the pick up area that is about 1/4 mile from my home. It works great with adapters and is very easy to install by yourself with minimal skill or tools.



- 24920
by:

This turned into a little bit of a headache. First Problem: I had to go purchase a new bracket to reduce the noise, no big deal. They warned me about it so I was prepared. Appreciated it, good business practice. Second Problem: The fit with the bike rack I bought with it (Swagman XC 2-Bike Rack Platform Style for 1-1/4" and 2" Trailer Hitches - S64650). Although I greased it ahead of time, the rack still got stuck. So stuck that to remove it for a trip, I ended up actually having to slightly bend the bike rack just to relieve enough pressure so I could pry it out. That essentially rendered the rack unusable. The receiver might have been just slightly smaller than it advertises or the bike rack might have been slightly larger. Not Sure. The hitch is solid though, really strong. Easy to put on. The bike rack... not as much. So for about 4 months, I've had a hitch that I can't actually use. Despite the little headaches and total loss of the rack (only reason I bought it) I'm giving it 4.5 stars. Its really well constructed & super easy to install. I'd definitely buy it again ….but with a lot more grease.


Comments
Sometimes the powder coat or paint gets applied more liberally to a hitch receiver or a shank, making the fit a bit tight. If that is the case, you can sand some of the paint or powder coat off to make the fit a little easier. If you are interested in getting your Swagman XC bike rack # S64650
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
$128.85
up and functional again, Swagman does offer a replacement shank, part # P306
Replacement 1-1/4" and 2" Shank for Swagman XC Series Bike Carriers
$45.00
.
-- Etrailer Expert Victoria B - 02/17/2020


- 24920
by:
2015 Subaru Outback Wagon

Downsizing so I needed a hitch setup for my 2015 Honda Fit. I have utilized etrailer previously on my daughter's Outback and received the same prompt FREE delivery. Solo install and only a little regret not having a mate to support the hitch when doing the bolt up. No surprises and that is a good thing. Note: Bend the one muffler hanger down about a quarter inch to remove any chance of muffler against bolt head tap. Thanks etrailer.



- 24920
by:
2016 Honda Fit

Easy install all I really needed was an extra set of hands. Shipment was fast, package was intact with no tears or rips. Receive package with no missing parts, instructions where clear and easy to understand. Also video very helpful. I use the hitch for my Yakima bike rack. This hitch is perfect for this application.



- 24920
by:

The hitch was everything we hoped for. The hitch was a gift which was great because it was for a biking individual to hold her bike rack. Thanks for a quality product. Rick


Comments
It was a gift to a friend. She uses the hitch in conjunction with her Thule bike rack most every weekend.Installation with some help from online was a breeze. Thanks for mfg. such a good product.
Richard S - 12/13/2020


- 24920
by:

Rack fits and I was able to install, but afterwards the muffler rattled and I had to have the muffler hanger bolts extended for $70. Overall, still cheaper than if I paid someone to install it. etrailer customer service was very good.



- 24920
by:
2015 Honda Fit

Good hitch , any hitch you would install on a 2015 Honda Fit would be challenging to put on. Draw tie includes all the things you need plus directions. Also etrailer has good videos on this too. The thing that helped me most was installing the U bolt to just hold the hitch in place



- 24920
by:
2015 Honda Fit

By far the best deal and very easy to install. I was able to install the hitch by myself with the car parked in my driveway, no need to lift it to complete the project.



- 24920
by:

I purchased the hitch so that I could attach a bike hitch to cart my bicycle, Sandia, and my friend's bicycle, Sylvia, around. While it looks like the bicycles are bigger than my car, I drive to bike trails with confidence, knowing my girls will still be attached when we arrive at the park. We have all had so much fun exploring bike trails this year. It's been awesome.



- 24920
by:

This has been the perfect hitch for my Honda Fit! Looks nice and fits well with the car body. A little challenging to install as one of the bolts was initially making contact with the muffler. Other than that, a solid hitch that gets a lot of use hauling bikes!



- 24920
by:

Ordered a Honda Fit Trailer Hitch. Delivered on time and was able to install it without a problem.


Comments
I pull a very light trailer and very light loads, so its working out fine - just what I needed.
CHRISTINE L - 07/31/2020


- 24920
by:
Honda

I , being a mechanic , installed this on an friends Honda Fit . With my automotive connections I couldn’t find a cheaper price locally. We decided to do this on a week night , in the driveway . I wasn’t looking forward to the install . Knowing things take twice as long with a helper, I had the vehicle ready to work on when I got home . By the time my friend showed up it was done . Very easy to install . Easily 5 stars . The fit and finish was excellent .



- 24920
by:

I don't use my hitch a lot but it has been fine for what I bought it for. I have an electric bike that is heavier than an average bike so I needed a sturdy bike rack that has worked fine with this hitch. I also pulled a small trailer a short distance one day. My brother installed it for me and one minor problem we had was a vibration from the exhaust against the hitch. He fixed it by stuffing some stove door rope between the exhaust and the hitch where it was vibrating. It's been fine since then.



- 24920
by:
2017 Honda Fit

The three spacers 1/4 x 7/8 x 3 were too large to fit into the factory holes. They all needed to be shaved from 7/8 width to 3/4 width to be able to insert and be manuvered into place. Once this was done, installation was possible. Also the there are two rubber muffler hangars and one had be replaced with a longer one because the muffler no longer had clearance once the 7/16 x 1-1/4 carriage bolt was installed. The original rubber hangar was too short to strech. Autozone had a good supply to choose from and one was selected that was 3/8 inches longer and ealisy installed without a stretch. If these two issues hadn't arose, I would have given 5 stars on this review. Taping the spaces was a great idea. If the spacers are too large to pass through the chassis holes, place all three of them together in a vice and use a belt sander with 40-60 grit belt to strip metal off. Then use a 220 grit belt for smoother finished surface. Be sure to take metal evenly from both sides and keep the hold centered.


Comments
Product works fine after one year.
Oscar O - 03/12/2019



- 24920
by:
2018 Honda Fit

Product, ( hitch for daughters Honda Fit) . Shipping was so fast. Received in a couple days and shipping box was in great condition. The use is to carry a bicycle rack. Being older, not as easy to climb under car, but hitch fit and finish was perfect and it installed quite easy. Hint, Watch video, it gives you a good idea of what is involved for old retired mechanics like me. Very satisfied and so easy to buy with great price and free shipping. Thank You etrailer.com


Comments
One year later, hitch finish still looks new and function is excellent. Hitch shows no signs of rust or chipping. Nothing else to add about a well designed and finished product. Thank you again.
Charles - 06/14/2019



- 24920
by:
2015 Honda Fit

It's been a year, no problems at all. I had it installed on my 2015 Honda Fit by a mechanic. He didn't complain, so the installation was all right I guess. I use it with a bike rack to carry my bicycle around almost every day. I don't really know what to write here, it's a trailer hitch, it just works.


Comments
It is great. Never had any problems with it.
Renat - 02/20/2018



- 24920
by:

The box was torn on arrival with the end exposed. Fortunately, the parts were wrapped around the neck with plastic shrink wrap, so I was able to install it.


29
108
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • Which is Better Curt or Draw Tite Hitch for 2017 Honda Fit
    Both the Draw Tite hitch part # 24920 and the Curt part # C11406 are great hitch options for your 2017 Honda Fit. The only real difference that you'd notice between the two is how far the hitch sticks out relative to the rear bumper. The Draw Tite has 3 inches from the pin hole of the hitch to the outside of the bumper and the Curt Has 1/2 inch so it would stick out a bit more. If it was my choice I would go with the Draw Tite since the hitch will be recessed enough that it's out of...
    view full answer...
  • Can Draw-Tite Trailer Hitch Receiver 24920 Be Used To Tow 4' x 6' Utility Trailer
    The Draw-Tite Sportframe Trailer Hitch Receiver # 24920 you were looking at for your 2016 Honda Fit would be fine for towing your 4' x 6' utility trailer as long as it does not exceed the 200lb tongue weight rating and 2000lb trailer weight rating of the trailer hitch receiver, or the towing capacity of your vehicle. All of the trailer hitch receivers made for your vehicle have the same 2000lb trailer weight rating, so I do recommend going with the # 24920 due to Draw-Tite hitches being...
    view full answer...
  • Trailer Hitch for 2020 Honda Fit to Carry Thule T2 Bike Rack
    For a hitch for your 2020 Honda Fit the Draw Tite hitch part # 24920 is the hitch to use as it's a confirmed fit, installs easily, and would do great to carry a bike rack. For a platform Thule bike rack the T2 Classic part # TH9045 is a great option that is a fit for this hitch.
    view full answer...
  • How to Carry a Recumbent Bike and Recumbent Trike with a 2015 Honda Fit
    I hate to tell you but you will not be able to carry the bikes with your Honda Fit. The issue is that all of the trailer hitches for the Fit are Class I hitches. The types of bike racks that can hold both a trike and a recumbent bike, such as # HR1000Z-R-TRKADP, only fit Class III and up 2 inch trailer hitches. There are adapters but the use of an adapter will reduce the tongue weight capacity of the hitch by 50 percent. The tongue weight capacity of the available trailer hitches is...
    view full answer...
  • What Are the Torque Specs for the Draw-Tite Hitch On a 2017 Honda Fit
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24920 which is a fit for a 2017 Honda Fit offers bolt-on installation. I have attached an install video for you on this process as well. The torque specs for the bolts will be listed in the installation instructions which are attached to this page for you. If you don't have a torque wrench, you can obtain one using the Powerbuilt Beam-Type Torque Wrench part # ALL644044.
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for 2019 Honda Fit
    The trailer hitch I recommend for your 2019 Honda Fit is the Draw Tite part # 24920 because unlike the Curt hitch that also fits your vehicle # C11406 it does not require a stabilizer strap when carrying a non-supported load like a bike rack. For a bike rack I really like the Saris SuperClamp EX part # SA4025F. This is a platform bike rack that only touches the bike at the tires and only weighs 35 lbs. The biggest drawback to platform bike racks has always been the weight of them,...
    view full answer...
    Image 1 for
  • Bending Muffler Hangers When Installing Trailer Hitch on 2015 Honda Fit
    When installing the Draw-Tite Sportframe Trailer Hitch Receiver # 24920 on your 2015 Honda Fit you will indeed need to first detach the exhaust from the rubber isolators so that it can be lowered. Then after the hitch is in place Draw-Tite recommends bending the hanger spears downward just about 1/2 inch to allow for additional muffler clearance when reattaching it. This isn't necessarily a requirement as you might get sufficient clearance as is, but just something you can do if you find...
    view full answer...
  • Best Trailer Hitch Recommendation for a 2015 or 2016 Honda Fit
    The best priced hitch available for either a 2015 or 2016 Honda Fit is the Draw Tite part # 24920 which would be a great option. The Curt hitch part # C11406 is the most expensive and require the use of a stabilizer strap when carrying a non-supported load like a bike rack so it would not be what we would recommend. If you were to do some towing with the # 60353 you would also need the wiring kit part # 119190KIT, hitch ball # 19256 for a 1-7/8 inch ball or part # 19258 for a 2 inch ball.
    view full answer...
  • Hitch Recommendation for 2018 Honda Fit for Carrying Bike Rack
    Hitch mounted bike racks are the way to go as they provide the most stable attachment to the vehicle, are the easiest to load/install, and don't touch any vehicle painted surfaces. For a hitch the Draw Tite part # 24920 would be the hitch to go with as the Curt requires a stabilizer strap when you carry a bike rack. The install for this rack is pretty easy as well. I attached an install video for you to check out that will cover the entire process as well. I really like the Saris...
    view full answer...
  • Is Exhaust Bracket Bending Required to Install Trailer Hitch on a 2016 Honda Fit
    Yes, when you install the Draw Tite hitch part # 24920 on a 2016 Honda Fit you will need to bend the exhaust hangers slightly so that the hitch does not rattle against the exhaust. They will need to be bent 1/2 inch downward. Check out the install instructions and install video for this hitch for you to check out as well.
    view full answer...
  • Do the Hitch Holes On a 2019 Honda Fit Need to Be Enlarged to Install a Hitch
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24920 which is a fit for your 2019 Honda Fit should not require you to drill or enlarge any holes in the frame per the owner's manual. I looked over the reviews for this hitch and there was one instance of a customer who had to shave the spacer block to fit it through the holes but nothing to the vehicle itself was altered. That said, it is not completely out of the ordinary to have to slightly enlarge a hole in the frame so this may...
    view full answer...
  • Is a 4-Bike Rack Possible for 2015 Honda Fit?
    Your 2015 Honda Fit will not have a bike rack available that can carry 4 bikes because only Class I hitches will fit your vehicle, and Class I hitches such as the Draw-Tite # 24920 that fits your Honda have a maximum capacity of 2 bikes. There are 3-bike trunk-mounted racks for your Fit such as the Hollywood Racks # HRF2-3. This rack uses straps with rubber-coated hooks to secure to your car and has foam pads that prevent scuffs or other damage to your Honda. Additionally, please note...
    view full answer...
  • Bike Rack Compatibility With Draw-Tite Class I Receiver Hitch
    A Class I hitch like the Draw-Tite # 24920 would use a 1/2 inch diameter hitch pin. If the bike rack you're interested in is compatible with a Class 1 hitch with a 1-1/4 inch receiver, it will be compatible with the hitch. The Thule Hitching Post Pro # TH934XTR for example would be perfectly compatible with a Class I hitch, although you'd be limited to carrying two bikes on it due to the low tongue weight capacity of a Class I hitch. Thule also offers a similar rack that can carry two...
    view full answer...
  • Does Draw Tite Hitch 24920 Fit 2015 Honda Fit and Who Could Install It
    The Draw Tite hitch part # 24920 is a confirmed fit for your 2015 Honda Fit and would work well. We don't have a specific shop we can recommend but basically any qualified mechanic in your area would have no problem installing the hitch as the install is very basic. I attached an install video for the hitch for you to check out as well.
    view full answer...
  • Best Trailer Hitch Receiver for a 2018 Honda Fit
    The best trailer hitch receiver we have for your 2018 Honda Fit is the Draw-Tite Sportframe Trailer Hitch Receiver part # 24920 which is a direct fit and installs using pre drilled holes in the frame rail. This option will also not require the use of an additional support strap part # 18050 like the Curt Trailer Hitch Receiver part # C11406 will. I have attached an install video of this trailer hitch for you. As you can see, the install process is very easy taking most on average only...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for 2017 Honda Fit LX
    Yes, the Draw Tite hitch part # 24920 that you referenced is confirmed as a fit for your 2017 Honda Fit LX. It will work great with the Swagman XTC2 part # S64670 as well. For a similar bike rack that is a bit more stable on the road the Hollywood Racks part # HR200Z is what I prefer. If you check out the two review videos I attached you'll see the HR200 is a bit more stable.
    view full answer...
  • Parts Needed to Add Trailer Hitch Load Extender to 2017 Honda Fit
    The Draw-Tite Sportframe # 24920 is confirmed to fit your 2017 Honda Fit and will work well for you. However it's a Class I hitch so the Class II MaxxTow Adapter # MT70032 will not fit in the hitch. They're both 1-1/4 inches but the Draw-Tite has a stopper inside of it to prevent you from overloading the Class I hitch with Class II accessories. Instead you can use the Brophy # HTAD. Then you will be able to install the MaxxTow Load Extender # MT70231. You'll also need to be mindful...
    view full answer...
  • Trailer Hitch, Wiring and Ball Mount Recommendation for 2015 Honda Fit
    For smaller, lighter-duty vehicles like your 2015 Honda Fit we only have Class I hitches like the Draw Tite part # 24920 that you referenced. I can't imagine a Class II hitch being available or useful for your vehicle as it wouldn't be able to tow 3,500 lbs regardless of what hitch is on it. We have trailer wiring as part # 118767 which would be a fantastic option confirmed as a fit. For a ball mount you'd then want the part # 36071 which is designed for this hitch and then for hitch...
    view full answer...
  • How to Determine Ground Clearance on a 2015 Honda Fit with Draw-Tite Hitch Before Installation
    On Draw-Tite trailer hitch # 24920 and all of the hitches for the 2015 Honda Fit the receiver will be directly below the rear fascia. So if you measure from the bottom most part of the fascia down to the ground and subtract 1-3/4 inches that will be the approximate ground clearance measurement once the hitch is installed. On smaller vehicles that are low to the ground to start with, adding a trailer hitch usually reduces ground clearance so you have to keep that in mind when choosing...
    view full answer...
  • Would a Hitch or Roof Rack be a Better Option for Bike Rack on 2018 Honda Fit?
    I recommend using a hitch and hitch-mounted bike rack on your 2018 Honda Fit for a couple reasons. The first is convenience; it is going to be much easier for you to mount your bikes on a hitch-mounted rack as opposed to a roof rack where you'd have to lift the bike on top of your car as opposed to simply placing it in the hitch rack. The other reason is cost; a roof rack will be far pricier than a hitch, and you can either pocket those savings or use it to get a premium bike rack. As...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2015 Honda Fit
    I checked the online owner's manual for your 2015 Honda Fit and it did state that this vehicle is not designed to tow a trailer. It did not list any weight capacities or limits for the vehicle when it comes to trailer towing. I recommend checking your copy of the manual, as it's possible that you have a different model with alternative restrictions or guidelines. If you do decide to tow a small trailer, you will want the Draw-Tite Trailer Hitch # 24920. This is a Class I hitch that...
    view full answer...
  • Bike Rack Needed for a 2018 Honda Fit with Plastic Spoiler
    I do have a solution for you to use a 2-bike bike rack with your 2018 Honda Fit, but since the spoiler is plastic none of the trunk mount options are going to be compatible. The all use straps that would go over the spoiler and could very likely damage it. Instead what you need to do is install a trailer hitch and use a hitch mounted bike rack. Although this is different than what you are wanting the perks of using this system include not having any bike or bike rack contact with your...
    view full answer...
  • Recommended Trailer Hitch for Transporting Bikes on 2015 Honda Fit
    For your 2015 Honda Fit, I recommend the Draw-Tite Class I Trailer Hitch # 24920. Both this trailer hitch and the Curt # C11406 that is also confirmed to fit your vehicle have the same 1-1/4 inch receiver opening and 200 pound tongue weight capacity. The reason I recommend the Draw-Tite model is because you are not required to support non-trailer loads such as bike racks and cargo carriers with a stabilizing strap. Curt requires this for their trailer hitch in order for it to remain under...
    view full answer...
  • What Size Hitch Pin Does Draw Tite Hitch # 24920 Take
    The Class I hitches like the Draw Tite part # 24920 you referenced are designed for 1/2 inch diameter hitch pins like the part # PC2. For a locking hitch pin in this size you'd then want the part # e98879.
    view full answer...
  • Trailer Hitch, Roof Rack, Cargo Box, and Bike Rack for 2020 Honda Fit
    We do have all the parts you need for your 2020 Honda Fit to carry your gear, and let's start with the trailer hitch, with the best option being the Draw-Tite Trailer Hitch Receiver # 24920. This hitch has the best ground clearance of the hitches that fit the 2020 Honda Fit so since you are using it for a bike rack this is exactly what you'll need. As for the bike rack, this is a Class I hitch so you do need a Class I compatible bike rack as well as one approved for flat towing. The...
    view full answer...
  • Does Draw Tite Hitch # 24920 Fit 2018 Honda Fit Sport
    For your 2018 Honda Fit Sport the Draw Tite hitch part # 24920 is a confirmed fit and would work well. For trailer wiring you then would want the ZCI kit part # 119250KIT as it fits your vehicle and does not require any splicing. For a ball mount you'd want the part # 36071 and for a 1-7/8 inch hitch ball # 19256.
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video by:
Zack K
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Sarah W
Updated by:
Sarah W
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624