Wiring Brake Controller to Under Dash Wiring of 2021 Ford Ranger

Published 05/02/2022

Products Featured in This Question

Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - Up to 4 Axles - Proportional

(65)

$348.95

Universal Wiring Adapter for Curt Trailer Brake Controllers

(457)

$11.01

Question:

The 2021 Ranger has 4 wires under the driver side dash near the fuse box for aftermarket trailer brake controllers. So far so good. I noticed that the Yellow 12v wire is ALWAYS hot. Its not switched with ignition, its always on. So if I lock my truck and leave it for a month, the brake controller will draw current the entire time. Is this a problem? Should I find a switched 12v source? Im using the Curt echo under dash I purchased from etrailer thank you!

asked by: Doug G

Helpful Expert Reply:

We had the chance to install a brake controller in a similar Ranger as your 2021 model and when using standard brake controller wiring like with the # C51515 to install the Curt Echo Mobile # C27JR the yellow/orange goes to the black wire, the blue wire is going to go to the blue wire, the white wire is going to go to the white wire, and the violet with white stripe goes to the red wire.

expert reply by: Jameson C

Doug G.

5/2/2022

Jameson C.

5/2/2022

Brake controllers go into sleep mode after 10 minutes or so which prevents them from drawing a significant enough amount of current to drain the battery. So you do not need to worry about your battery being dead if you left the vehicle parked for an extended period of time.