Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Corrosion-resistant ball mount is 9-3/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (2037 Customer Reviews)
Corrosion-resistant ball mount is 9-3/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.I wasn't sure what type of ball mount I needed for my new Mazda CX-9, so I had to call a representative. The first time I called, the very knowledgeable gentlemen told me exactly how to measure my SUV to figure out the drop I needed. I called back the next day and talked to a lady who helped me figure out exactly what I needed.
This is my second purchase from etrailer. The first was a hitch for my old Honda Odyssey, which was also a great experience. The employees are so helpful, the video tutorials on the web site are fantastic and the prices are great. etrailer.com is the first place I go to look for trailer and towing supplies!
I needed to tow a trailer with a 2" ball. My original ball mount has a 1 7/8" ball installed. I had previously tried to change a ball on a hitch and destroyed the nut and damaged the underside of the ball mount. The lock washer had done a great job in keeping the nut from coming off. I dreaded trying to remove my 1 7/8" ball to install a new one that I would only use once.
I decided to buy a new ball mount and mount the new 2" ball.
This ball mount is so inexpensive that I realized I could have both ball sizes permanently mounted for use in either ball size.
James P.
1/17/2020
Still glad I purchased a new mount instead of trying to change ball sizes.
I needed a ball mount that would keep the tongue lock away from the spare tire on my Jeep.
This mount gave me just enough clearance so the tire cover clears.
Handled a small trailer with 1500 # of rock / concrete easily.
Great addition for the trailer.
Great service, fast shipping.
Thanks
Rick
6/29/2015
Yes, I still like it
Holds the ball very well and fits into the receiver socket nicely.
Carol C
Thank you so much for your response and follow up to my recent order. I didn't expect to receive my Curt Hitch and drawbar order as quickly is as did. Thank you again for your attention and promptness in processing my order. It's been a pleasure to deal with your company and I would urge people to do business with you.
Product and services were excellent. The eTrailer website is clear and concise, and offer DIY videos for all products. Major plus !!
etrailer service technicians are very professional and follow up on calls and deliveries. Prices are very competitive, with shipping costs included.
I've recommended to friends who were also very satisfied.
Thanks
Customer service is great, returns are trouble free and fast. The hitch is very solid, and came with all hardware needed to install. I had to return a defective wire harness. Replacement worked fine. I put this on my 04 Chrysler 300M, a car that really wasn't built for towing, and the hitch works great !!
I got an excellent product at a fair price, from a company that stands behind what they sell.
I'm glad I made my purchase with etrailer.com.
Online ordering was a breeze and the item shipped within a day or two of ordering. etrailers let me know via e-mail when the order was filled and provided a tracking number.
The drawbar was well packaged and quality is perfect....good welds, solid paint to prevent corrosion and the holes for the pin and ball are perfectly sized...no slop and not too tight. I would purchase again from etrailer
A good product! This is the second hitch I have installed using etrailer and it went as well as the first. Not being a super skilled Tech it took longer than expected, but for me it was a project that needed to be done, and I enjoy a good project when it comes together, no matter if it took a little longer due to an average person's tool inventory and simple jack stands and floor jacks. The instruction videos are the best I have seen as of yet. If you enjoy working with your hands, I recommend etrailer products!
Excellent quality and fits the car (distance from fender to trailer)
I would recommend.
Larry K.
8/28/2018
It works perfect for the Volvo S60 when towing a small camper tenttrailer.
This, and the trailer hitch I purchased earlier are good, solid products. There was a bit of very hard paint preventing the hitch key from going through the hole, mut a half minute with a round file cleaned it out. The paint is TOUGH so I guess that will be good for long wear.
The tongue had blown through the end of the shipping package, but there was no damage.
The whole experience with etrailers.com was excellent, especially with the video instructions.
It was easy to use the website to find the correct hitch parts for my car and to order. They arrived when expected and in an intact box, well packaged. Was able to easily install in under an hour.
Dwight
5/9/2019
Everything is still working great. Thanks.
I have been impressed with you guys so far. Your prices are good and to have what I need. I went on {a different website}, but I like to deal with people, and talk to them when its needed, {that other website} is a selling machine, they are good with returns, but they really don't know their products, and rely on reviews to give you answers. Anyway, I will be calling you guys very soon to buy a wiring harness, and I,d like to pick one of your technicians brain for the right harness. Thanks Again for being out there
I really like this ball mount for my Ford Fusion.
This is a solid piece of steel.
I did turn it upside down to get the trailer tongue to look ok.
I bought this with the Curt C12091 hitch for the Ford Fusion.
I'm using this to haul small trailer with Chevrolet Equinox. Hitch on this SUV is rated at 3500 lbs. max. Product is well made.
Though etrailer recommended the 7 1/4" length for the Focus ST models, measuring the length required is more than 7 1/4. The 9 3/8" length is a perfect match for the bumper profile.
The hitch was exactly what I needed and works great for the receiver on the car. Shipment was quick and the quality and price were great.
It had a few burs that had to be smoothed off to fit in the receiver and for the pin to go through but other than that it should be good to go for the kayak trailer.
Received everything I ordered in just 2 days. Second time I used etrailer.com and would have no problem recommending them or using them again.
A nice little receiver adapter that is strong. Good quality, nothing to worry about here.
The hitch package I installed on my 05 Camry is holding up great and pulls my bass tracker like a charm!
Very well made ball mount. Nice, clean welds. Good looking powder coating. Made in the USA and reasonably priced. What is there not to like about Curt products?
The Class II Drawbar is working great with our 2016 Chev. Equinox. Thanks.
Solid product but needs more rise to comfortably tow a U-Haul trailer with a 2015 GTI.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John J.
1/21/2015
The ball mount and ball that I bought last year has worked out well, and is still in great shape. But Ive come to expect that etrailer.com will sell me a quality product. Thats just what they do!