Does the Muffler Have to be Removed to Install a Trailer Hitch on a 2005 Scion xB

Question

Question:

Hi - looking under the car, it seems as if you have to remove the muffler to install this hitch - is that correct

asked by: Bob

0

Expert Reply:

According to the installation instructions for CURT Trailer Hitch, # 11487, you will not need to remove the muffler in order to install the hitch on your 2005 Scion xB. I have included a link to the installation instructions for you to view.

The hitch comes with a ball mount, hitch pin, and clip. If you plan to do some towing you will need a ball, # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use Curt Wiring Harness, # C56030. I have included a link to the installation details for the wiring as well.

expert reply by: Michael H

0

Sonny

4/18/2013

can i install a bike rack on a 04 scion xb?

Patrick B.

4/25/2013

There are a lot of bike racks that can be mounted to a 2004 Scion xB particularly if a hitch is installed first. There are options for trunk/hatch mount racks, roof mounted racks as well as hitch racks. To find more info on the fits for your vehicle, use the vehicle fit guide at the top of our website to select the year, make and model.

Answer 1

For your 2005 Scion xB the hitch I recommend is the Curt #C11487 which has a concealed crosstube for a more concealed look! For trailer wiring the best option is the Curt Wire Harness #C56030 which is very easy to install with plug-in connectors that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does the Muffler Have to be Removed to Install a Trailer Hitch on a 2005 Scion xB

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching