Is Bumper Trimming Required to Install Curt Trailer Hitch C11286 on a 2013 Subaru Impreza Hatchback

Question

Question:

I just watched your video for installing a hitch on an Impreza Hatchback. Im concerned about what looks like an opening that needed to cut in the bumper below and including the knock-out rectangle. Is that necessary to install this hitch on a 2013 Impreza Hatchback? There are photos a customer posted that dont seem to show the bumper being cut and even though the video seems to show a cut in the bumper, the video doesnt mention it.

asked by: Lisa

0

Expert Reply:

I am not sure why the Impreza in the video has a large cut out in the bumper. It was a customer vehicle and they may have had something else installed there at some point. Trimming is not required for installation of hitch # C11286. I have included a link to the instructions so you can see for yourself that trimming the bumper is not needed to install the hitch.

For trailer wiring use # 118573 for a non-WRX/STi wagon. I have linked instructions for the wiring as well. The hitch comes with a ball mount, pin, and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.

expert reply by: Michael H

0

Jaime

3/6/2013

Thanks for this Q

Patrick B.

4/9/2013

You are quite welcome.

Answer 1

Yes, the T-One trailer wiring harness part #118581 is a confirmed fit for your 2013 Subaru Impreza sedan and would be a great fit. We recommend this brand the highest as it tends to be the most reliable over time.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Is Bumper Trimming Required to Install Curt Trailer Hitch C11286 on a 2013 Subaru Impreza Hatchback

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching