bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 3 Inch
  6. Rise - 2 Inch
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K

Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K

Item # 36071
Retail:$48.19
Our Price: $22.68
You Save: 53%
Trailer Hitch Ball Mount
Shipping Weight: 6 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K part number 36071 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2110)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch Ball Mount - 36071

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 3 Inch
  • Rise - 2 Inch
  • No Ball
  • 3500 lbs GTW
  • Class II
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 7-3/16" from center of hitch pin hole to center of ball hole
  • Rise: 2-5/8" from top of inside of hitch opening
  • Drop: 3-1/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

36071 Draw-Tite Ball Mount for 1-1/4" Hitches - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3,500 lbs

Replaces 90003




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K - 36071

Average Customer Rating:  4.8 out of 5 stars   (2110 Customer Reviews)

Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

by:

The hitch works great. The service was excellent!!!

I'm going back and having a hitch put on my other car soon.

Thank you.



by:

Everything was perfect.! Nice paint, package, and fast shipping.! Im satisfied.!



by:

Adam noticed that the trailer hitch I purchased and the pins would not line-up correctly. He personally contacted me to find me the correct parts that will fit my car before it was even shipped. I received the ordered parts in just several days. He saved me from so much of headaches and hassle. Thank you for your professionalism and caring attitude!



by:

Works Great

Michael

8/20/2023

Great



by:

I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.

Terry P.

12/11/2017

The products are great and working just fine!!!



by:

You etrailer folks sure know how to spoil a customer. Since I'm a repeat purchaser of your products, I'm still amazed how quickly you fulfill the order and ship it out so promptly. I paid for standard shipping, but if I didn't know better I'd say that it was expedited shipping.
The hitch was well engineered and excellent vehicle specific lighting kit with thorough instructions for both(2017 Chevrolet Malibu).
You "guys" are a "Class Act"!. As Arnold Schwarzenegger would say, " I'll be Back"
Best regards


Jack B.

6/5/2018

Thank you so much for following up with my purchase satisfaction. I sincerely appreciate your professionalism. Yes, very satisfied with the receiver, ball and wiring kit.



by:

Real fast shipping on top of a great price lead to easy instalation. Done it all by myself with no problem but working the frame bolts out is tough. Make sure to run them back up and down while taking them out to avoid breaking.

B. S.

7/6/2018

Great



by:

Awesome love the products my Subaru loves pulling my camper to New Hampshire and and getting hay weekly and yes my 2011 Subaru wrx pulls hard



by:

A++ product at great price and fast shipping, it's a one stop shop all you need in one box and with the video makes it easy to install on my 2015 nissan altima with the bolts thru the trunk and didn't even to remove the mufflers by sliding the hitch in one side and pushing up the other end while pulling the one muffler to one side I was able to install quicker and the plug and play wires makes it easy than trying to decode wires. Thank-you.



by:

Ordered a ball hitch, hitch cover, draw bar, and hitch pin for a 1 1/4" receiver so I can use a utility trailer to haul my 7' dingy down to the shore. We have a hybrid vehicle so hauling is not recommended but the distance is less than a mile and the total weight is less than 300 lbs. I shopped in vain to find the right size for our receiver but then I found etrailer. Couldn't be more pleased with the prices, communication and delivery! 5 stars absolutely.



by:

The trailer hitch and the wiring kit were both excellent quality. The delivery was fast and the instructions and installation videos were very helpful. Don't be afraid to do it yourself. You'll save yourself a bunch of money. Great place to do business.



by:

The quality was fantastic Love the tracking good job best I've ever seen.

Barbara

8/17/2022

Still holding strong



by:

nice drawbar



by:

This time, I got what I needed and your sales representative was very helpful



by:

The products I bought were very good quality and I have been so pleased with them. I bought this bike rack and all the things with it, due to my bad back. It has been so good not having to lift the bike up high! I was hit hard in the back and it did not do a lot of damage to the rack. I was very surprised when I saw it. It was bent when I pulled it down. My insurance replaced it. It proberly save my trunk from a lot of damage. So the quality of all of these products was extremely high!!!!



by:

my wife's 2011 subaru outback. very fast shipping, and the parts are as described. installed it on the floor with the car jacked up on the driver side in 1 hour.
very easy install after watching video on etrailers site. the coolest thing on the install was having my wife under the car with me to put it in place at least for 5 min. she might be sophisticated, but i got that extra set of hands to line it up. lol.



by:

Works great. Easy to install..



by:

Let's face a fact here . . . . . if you're gonna install a trailer hitch on your vehicle, then you most like are going to need one of these ! May as well get the correct size ball while you are thinking about it ! And don't forget the bike carrier !



by:

So far so good. Product arrived quickly with no damage. Installed from start to finish in 20 minutes. Perfect fit. The way it's designed the spare tire can still easily be removed. Exactly what I was looking for. I have not installed the wires yet but I'm sure they will go on as easily as the hitch. I will tell everyone I know that needs a hitch to look at etrailer.com first. Great price and great products.



by:

Excellent product. Shipped fast. Easy to install if you follow the online video! Routed the 4 pin connector down to the hitch instead of out the back!



by:

This ball mount solved my clearance problems on my van. It has seen many miles since purchase and has always worked well, plus I saved money buying it here.



by:

Great product, installed on my 2014 Subaru Outback. I've towed my small utility trailer probably 40 times with no issues at all. Highly recommended for the price.



by:

I needed a mount to elevate the 2" ball for the kayak trailer to work properly with my Subaru Outback. This did the job. It will be on the road for the Labor Day weekend.



by:

The drawbar itself is great. I just wish I'd gotten a longer version for my 96 Subaru Outback wagon. In the rise position it's obstructed by the bumper and won't go in far enough to insert the pin. The drop position is fine.



by:

Excellent design/installation. All parts received and installed.


25
2107
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Availability of a Ball Mount for a 4-Wheeler and Other All Terrain Vehicles ATV
    The Class II Drawbar, # 36071, is intended for use on a Class II trailer hitch with a 1-1/4 inch receiver opening. It is more for use on passenger cars and trucks, though. We do carry several ball mounts specifically designed for use on ATVs which would be a better choice, since this would be their intended purpose. I have included a link to the available ATV ball mount options below.
    view full answer...
  • Ball Mount Recommendation for a 2012 Mercedes GLK 350 with Class II Hitch
    Your Class II hitch should have a weight rating of 3,500 lbs, check the hitch specifications to be sure. In this case we would recommend using a Class II rated ball mount, that has the proper drop or rise for towing your trailer. I added a link to all of the Class II ball mounts that we carry for you to select from. Normally trailers are set up with an 18 inch coupler height, so if you do not have a trailer to measure you can select a ball mount based on 18 inches and be very close with...
    view full answer...
  • Trailer Hitch for a 2016 Hyundai Accent Sedan
    Discontinued trailer hitch 36257 was designed to fit 1996 to 2000 Chrysler Town and Country, Dodge Caravan, Dodge Grand Caravan, Plymouth Voyager and Grand Voyager vans. It will not fit a 2016 Hyundai Accent sedan though. Not to worry though because there are custom fit hitches that will fit your Accent. If you need a hitch for a bike rack or cargo carrier I recommend # 24884. This and all of the hitches for the Accent is a Class I hitch with a 1-1/4 inch receiver. You will have to make...
    view full answer...
  • Which Ball Mount to Use with Draw Tite Hitch for 2008 Toyota Camry
    With Class I hitches like what you have on your 2008 Toyota Camry you have to use the recommended ball mount otherwise the warranty of the hitch is voided. For the Draw Tite hitch part # 36416 that you have you would need to use the part # 36071 which you referenced which has a 2-5/8 inch rise.
    view full answer...
  • Which Drawbar Should be Used with a Draw-Tite Hitch on a 1993 Cadillac DeVille
    The hitch manufacturers recommend drawbars for their hitches based on vehicle height and the most common trailer heights. The recommended drawbar for the 1993 Cadillac DeVille hitch is part # 36071 with a 2-5/8 inch rise or a 3-1/4 inch depending on orientation. Please refer to instructions for installing the hitch as which way the draw bar should be oriented. I will include a link to those instructions below. The hitch for your DeVille is Draw-Tite (NO LONGER AVAILABLE) part 36173.
    view full answer...
  • Recommended Ball Mount and Hitch Ball For 2017 Mazda CX-9 With Class II Trailer Hitch
    The recommended ball mount for your 2017 Mazda CX-9 is the Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K # 36071. It features a powder coat finish over a-coat base that provides excellent rust protection. This item also includes the hitch pin and clip included. The 2" Hitch Ball # 19258 is the perfect compliment to your ball mount. If you are towing a trailer, boat, etc. and you need a specialty mount, please contact me.
    view full answer...
  • Hitch Ball Shank Diameter for Drawbar # 36071
    The draw bar that was included with hitch part # 90511 is part # 36071 and it uses a 3/4 inch shank diameter ball. I have included a link to a page that contains all of our 3/4 inch shank balls.
    view full answer...
  • Ball Mount with 2-5/8" Rise/3-1/4" Drop for Class I Trailer Hitch
    From the center of the hitch pin hole to the back part of the shank measures 2" for the Draw-Tite Ball Mount # 36071. While the Draw-Tite does fit a 1-1/4" hitch receiver, it's designed for at least a Class II receiver which is why that end portion is a little longer. Some Class I trailer hitches have a stop built in which will keep this option from working. For a Class I ball mount that has the same dimensions we have the Curt # C45022. This measures 1-1/2" from the center of the hitch...
    view full answer...
    Image 1 for Image 2 for
  • Does the Draw-Tite Drawbar # 36071 Come with a Hitch Ball
    The Draw-Tite # 36071 does not come with a ball mount but it does come with a hitch pin and clip to secure the drawbar to your trailer hitch. For a hitch ball you can use part # 19256 for a 1-7/8" hitch ball or part # 19258 for a 2" hitch ball. Their individual prices can be found on their product pages.
    view full answer...
  • Class II Ball Mount With 3-1/2 Inch To 5 Inch Drop For Ford Explorer
    For a 1-1/4 inch hitch receiver on your Ford Explorer, we have two ball mounts that fall within the 3-1/2 to 5 inch drop range. The first one is the Draw-Tite Class II Ball Mount, part # 36078. This ball mount has a 4-3/4 inch drop and measures 7-1/2 inches from the center of the hitch pin hole to the center of the ball mount hole. It has a tongue weight rating of 300 pounds and a towing weight capacity of 3500 pounds. The pin and clip are included with this ball mount. The second ball...
    view full answer...
  • Is Trimming of Lower Fascia of 2016 Toyota Camry Required for Hitch Install
    To install a hitch on your 2016 Toyota Camry you will be required to remove or trim the underbody panel as well as modify the heat shield slightly. I attached an install video that shows everything required to install this hitch on a 2016 Camry like yours. For a ball mount you would want the part # 36071 and the ball # 19256 for a 1-7/8 inch ball. For trailer wiring you would then want the # 118405.
    view full answer...
  • Will the Draw-Tite Class II Trailer Hitch Fit On the 2008 Camry SE
    Yes, the Draw-Tite Class II Trailer Hitch, part number 36416, will fit your 2008 Toyota Camry SE. You will need a drawbar and a properly sized hitch ball along with a wiring harness to complete your towing setup. The Class II Drawbar 2-5/8" Rise or 3-1/4" Drop (Kit), part number 36071. is the recommended drawbar for your vehicle and should be used in the rise position only. With this drawbar the pin and clip are included. If you need a hitch lock part number 7682 will work with this hitch.
    view full answer...
  • Can a Class II Ball Mount be Used in the Draw-Tite Class I Hitch, Part # 24758
    The Draw-Tite Class II ball mount will not work with the Draw-Tite Class I hitch, part # 24748. To prevent Class II accessories from being used in a Class I hitch, the receiver has a stop welded into it to prevent the ball mount from sliding in far enough for the hitch pin to be slid into place. The only ball mount recommended for use with that hitch is the Class I ball mount, part # 3593. You must use the hitch manufacturer recommended ball mount on a Class I hitch otherwise it will void...
    view full answer...
  • Can I Tow A Trailer With A 2013 Toyota Camry?
    Per the manufacturer, Toyota does not recommend towing any type of trailer with the 2013 Toyota Camry. The last generation of Toyota Camry's sold here in the U.S. from 2007-2011, had a max tow rating of 1000 lbs. Although I cannot recommend you tow a trailer with your Camry, a trailer hitch such as the Draw-Tite Trailer Hitch Receiver part # 36540 is perfectly capable of hauling rear mounted accessories such as a bike rack or cargo carrier. I have attached an installation video of the...
    view full answer...
  • Complete Towing Setup For A 2020 Chevrolet Malibu
    Yes, the Curt Trailer Hitch Receiver # C12185 will fit your 2020 Chevrolet Malibu. This hitch has a maximum towing capacity of 3,500lbs and a maximum tongue weight capacity of 350lbs. You'll want to verify with your vehicles owners manual for your vehicle's maximum towing capacity, and compare that rating to the hitch and use the lowest rating between the two. If you're wanting a complete towing setup, you're also going to need wiring, and a ball mount. For wiring, the T-One Vehicle...
    view full answer...
  • Parts Needed to Tow Small Utility Trailer with 2017 Mazda CX-9 Equipped with 1-1/4" Hitch
    In order to pull a 4x6 utility trailer with your 2017 Mazda CX-9 you will need to add a wiring harness and ball mount/hitch ball combo. Starting with the wiring harness I highly recommend the Tekonsha T-One # 118278. This custom harness simply plugs into a factory port behind the passenger side trim panel for a complete "plug-and-play" install. This will provide you with a 4-Way connector to connect with and power the trailer's basic signal lights. I have attached an install video on...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2003 Oldsmobile Alero
    For your 2003 Oldsmobile Alero, I recommend the Draw-Tite Class II Frame Receiver Hitch # 36288. This hitch is custom-fit for your vehicle and will provide a 1-1/4 inch receiver opening with a 300 pound tongue weight and 3,500 pound towing weight capacity. I also recommend checking the towing capacity of your vehicle as listed in the owner's manual, as this will likely be the limiting factor. No drilling is required for installation and all the necessary hardware is included. I have attached...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Ford Taurus X to Tow a Horse Trailer
    Your 2008 Ford Taurus X has a gross trailer weight capacity of 2,000 pounds. As long as the combined weight of the trailer and the horse is less than that then you could tow the horse and trailer. Going with a single horse trailer made of aluminum will keep the weight down. So it is possible depending on the horse. The best option for a hitch is the Draw-Tite Class 3 Hitch # 75299. For a ball mount use # 36071. If the trailer you choose takes a 1-7/8 inch ball use # 19257 and if it takes...
    view full answer...
  • Wiring Harness, Ball Mount, and Ball for a 2013 Mazda CX-5 with Class II Trailer Hitch
    The trailer hitch on your 2013 Mazda CX-5 is a Class II hitch with a 1-1/4 inch receiver (there isn't a 1-1/2 inch size). The recommended ball mount is # 36071. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 118563 to add a 4-Way flat connector to the back of the vehicle. I have linked a video showing an example installation for you.
    view full answer...
  • Parts Needed to Tow a Trailer With a 2002 Dodge Grand Caravan
    I have a solution for you to tow a trailer, but you'll need some additional parts since the Drawbar for 1-1/4" hitches # 36071 is just a ball mount that is slid into a hitch receiver; you won't be able to just attach that to a car and tow with it. To start, you will need a trailer hitch like the Draw-Tite # 36296, which will bolt into the existing holes on the frame of your 2002 Dodge Caravan. Once that is installed, you can use the above mentioned draw bar with a hitch ball like the...
    view full answer...
  • Will Draw-Tite Class II Hitch 36416 Fit a 2008 Toyota Camry SE With Dual Exhaust
    The Draw-Tite Class II hitch you refer to, part # 36416 is indeed compatible with a 2008 Camry SE with the Dual Exhausts. I've provided a photo of the hitch once it's installed. If you'll be towing with the hitch, you'll also need a # 118405 trailer wiring harness, a # 36071 ball mount/hitch pin and for a 1-7/8 inch trailer ball use # 19256 or # 19258 for a 2 inch ball. I've linked to installation videos for the hitch and the wiring harness.
    view full answer...
    Image 1 for
  • Recommended Ball Mount Kit for 2016 Ford Escape Towing Utility Trailers
    The size of utility trailer you're likely to pull with your 2016 Ford Escape will have either a 1-7/8-inch or 2-inch ball coupler so one of these two sizes is likely to be what you need. The trailer's coupler will usually have the correct ball size (or sizes, in the case of an adjustable coupler) stamped into the metal housing. The best way to go for flexibility is our 2-inch hitch Ball Mount Kit # 989900 which includes two ball mounts with different amounts of rise and drop, as well as...
    view full answer...
  • Will Draw-Tite Trailer Hitch 36540 Fit a 2012 Toyota Camry with Dual Exhaust
    Yes, Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # 36540 will fit your 2012 Toyota Camry with dual exhaust. You will just follow any instructions pertaining to exhaust for both sides of the vehicle. The hitch was designed so that it could work with either exhaust configuration. If you plan on doing some towing the recommended ball mount is # 36071. For a compatible 1-7/8 inch ball use # 19256 and for a compatible 2 inch ball use # 19258. And for a trailer wiring...
    view full answer...
  • 2011 Toyota Camry SE Trailer Hitch Recommendation
    We have the Draw Tite hitch part # 36416 which fits your 2011 Toyota Camry SE model and would be a great option for doing some light towing. For trailer wiring you'd want the Tekonsha kit part # 118482 which is a confirmed fit as well. For a ball mount you'd then want the part # 36071 and for hitch balls # 19258 for a 2 inch ball and part # 19256 for 1-7/8 inch ball.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video by:
Dustin K
Employee Bradley B
Installed by:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.