Can a 2009 Pontiac Vibe Safely Tow a 1,500 Pound Boat Trailer
Updated 10/30/2025 | Published 01/26/2013 >
Products Featured in This Question
Question:
Hi I am looking at buy a 2009 Pontiac Vibe. It has a 1.8L engine and says it can tow 1,500lbs. I have a 15ft fishing boat that weights 1,500lbs. I would feel safe towing on flat ground but not sure about going up the boat ramp. I was wondering if you could give me your expert opinion? Do you think thats ok if I buy the right trailer hitch and get a tranny cooler? I probably use my boat 12 times a year. Most of the time I got out the ramp isnt very steep except when I go to Belle River the ramp is newer and concrete but is pretty steep. Do you think the Vibe can do it and not hurt the car? Thanks for your advice and time!!!
asked by: Ross
Expert Reply:
Since you would be right at capacity I do recommend taking any measures feasible in lightening the load. That will make it that much easier on the vehicle. I do believe that properly equipped, the 2009 Pontiac Vibe will be fine towing the 1,500 pounds. Since you will not constantly be towing it up a steep ramp, and that aspect is only a small part of the journey, the Vibe should be just fine.
For a trailer hitch, you can use # C12221 but it is for GT models. If you have a GT model then this is the only hitch option. If it is NOT a GT model then I recommend hitch # C12228. Both hitches are Class II rated and have enough capacity (2500 pounds) for your boat. Even though the hitches are rated at 2500 pounds you will still need to go by the vehicles 1500 pound capacity. I have included links to the instructions for both hitches.
Since you will be towing the correct ball mount is # C45521 for either hitch and you can use pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 118460. I have included some installation links on the wiring as well.
It is a good idea to add a transmission cooler. Transmission coolers are not vehicle specific so you can use any one you wish that fits in the available space in the engine compartment. On smaller cars, there is often not a lot of space so the most popular cooler we have, # D13503, might fit. It is 11 inches across, 8-3/4 inches tall, and 7/8 inches deep. I have included a link to an FAQ on transmission coolers that shows the best places to put them so you can determine if you have space.

Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- For Towing
- Class II
- 250 lbs TW
- 2500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: What to Know About the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118386
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Availability of a 2 Trailer Hitch for a 2004 Toyota Matrix to Carry a Bike Rack
- Q&A: Recommended Trailer Hitch And Small Trailer For A 2003 Toyota Matrix XR Hauling A Motorcycle
- Shop: Transmission Cooler
- Video: All About the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-55057
- Video: Review of CURT Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55522
- Video: How to Set Up Your Curt Trailer Hitch Receiver on a 2003 Pontiac Vibe
- Video: Mount: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector on a 2014 BMW 3 Series
- Video: Installing the Curt Trailer Hitch Receiver on your 2005 Pontiac Vibe
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Q&A: Is Hollywood Racks CrossTrack Compatible With E-Bike With Fenders
- Q&A: How Much Ground Clearance When Crosstrack Bike Rack Is Installed On 2021 Chevy Bolt EV Hitch?
- Q&A: Will Hollywood Racks Crosstrack Bike Rack Scrape Driveway When Pulling In?
- Q&A: Trailer Wiring Options for a 2005 Pontiac Vibe GT
- Q&A: Recommended Trailer Hitch for a 2009 Toyota Matrix XRS
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Best Bike Racks for Electric Bikes





Kathy
7/13/2024
I have a 2003 Pontiac vibe. Is there a camper on the market that is safe to haul with my vibe?