Product Experts Available Now!
Call 1-800-940-8924
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
(2344 reviews)
Price: $33.53
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Part Number: 36051
In Stock
$33.53
Retail:$59.35
You Save: 44%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (2344)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch Ball Mount - 36051
Highlights
- 3,500 lbs GTW for Light-Duty Hauling: Handles small utility trailers, boats, and campers.
- 5/8" Rise or 1-1/4" Drop for Level Towing: Keeps your trailer even with your hitch height.
- 7" Long Solid Steel Shank: Adds extra clearance while staying rigid under load.
- Corrosion-Resistant Powder Coat: Black finish over a-coat base helps block rust and road grime.
- Includes Pin and Clip: Ready to secure in your 1-1/4" Class II receiver right out of the box.
- 3/4" Ball Hole Size: Fits standard hitch balls for quick trailer hookup options.
Features to know about
Keeps Your Trailer Level: 5/8" Rise or 1-1/4" Drop
Getting the trailer height just right makes towing smoother and more controlled. This Draw-Tite ball mount gives you a 5/8" rise or 1-1/4" drop so you can line up your trailer coupler for level towing. The solid steel shank measures 7" from the center of the hitch pin hole to the center of the ball hole, helping you dial in the perfect fit for your setup.
Built for Steady, Everyday Towing: Class II Strength Rated at 3,500 lbs
When you’re hauling small campers, boats, or light utility trailers, dependable strength matters. This Class II ball mount is rated for up to 3,500 lbs gross towing weight and 300 lbs tongue weight. The fixed design keeps things simple and steady—no moving parts to worry about when you’re hitched up and rolling.
Fights Rust and Road Grime: Durable Powder Coat Over A-Coat Base
Towing gear takes a beating from weather and road debris, but this mount’s finish is built to handle it. The black powder coat covers an A-coat base for strong rust protection, keeping the steel surface sealed against corrosion trip after trip.
Straightforward Setup: Ready to Pin and Tow
It’s made to slide right into a 1-1/4" x 1-1/4" Class II receiver and comes with a hitch pin and clip so you can get going right away. The ball platform has a 3/4" diameter hole for your hitch ball (sold separately), making it easy to pair with the right size for your trailer coupler. Just insert, secure, attach your ball, and tow with confidence.
Specs
Application
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Class: Class II compatible only
Weight and Capacity
- Gross towing weight: 3,500 lbs
- Tongue weight: 300 lbs
Dimensions
- Length: 7" from center of hitch pin hole to center of ball hole
- Rise: 5/8" from top of inside of hitch opening
- Drop: 1-1/4" from top of inside of hitch opening
- Ball hole diameter: 3/4"
- Pin hole diameter: 1/2"
Warranty
- Limited lifetime warranty
36051 Draw-Tite Class II Ball Mount - 5/8" Rise or 1-1/4" Drop - 3,500 lbs
Replaces 90001
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- etrailer mistake
Ratings & Reviews
4.8
2344 reviews
by:
Lee
10/15/2015
I hooked up the draw bar today for the first time to the trailer that I built and the hitch I installed. The draw bar uses a cotter pin that slides on the bolt rather than going through a hole to mount the bar to the hitch. I have never used a sliding on pin in anything - I've only used those that go through a small hole matching the pin. This includes my farm tractor and other tools. I hope it is secure because it does slide on easily. The bar itself appears nice and strong.
by:
Paul J
07/16/2020
We used our car hitch and cargo carrier last summer in a Honda Accord to support a cargo carrier. It held up great on a 4,000 mile camping/hiking trip from Mid Missouri to Glacier National Park, MT. We were able to use the carrier/hitch to carry our large tents and baggage (approx 120#)directly behind our car trunk. Initially I was a little hesitant at the smaller 1-1/4" tube hitch, but it was very stable throughout the long trip. Sure was a lot less drag than putting all our gear on a roof cargo carrier.
by:
Mark
08/09/2019
This is an average product. Unfortunately it si too short to use on my 2018 Rogue with Draw-Tite hitch 36542. I will have purchase a longer ball mount such as Curt 45519.
Victoria B.
8/13/2019
Another drawbar option, and the one recommended for this hitch in the installation instructions, is # 36053. I have linked it here for your convenience.
Helpful Links
by:
Bill B.
05/09/2017
This is the 2nd hitch package I've bought from etrailer.com. (The first was for a 2011 Outback, and this one was for a 2017 Outback.) And like the first, this order was handled perfectly by the etrailer rep. The hitch and drawbar arrived as promised and I had my mechanic install it yesterday. He said it was a fairly simple job (took him less than an hour) and the new wiring harness simply plugged in to the existing harness in the 2017 Outback (as opposed to having to be spliced in the 2011 Outback with the first hitch package). Also the price was very good... more competitive than buying it from, and having it installed by, a local dealer. All in all, it was a painless and pleasant experience. I will definitely buy my next hitch from etrailer when it's time to replace my 2017 Outback.
by:
William S.
08/11/2019
I received exactly what I ordered when I expected it and the pricing was super competitive. The drawbar fits my Gator perfect. Great online shopping experience. I Highly recommend Etrailer.com.
William S.
8/12/2020
One year later this product has done the job without fail. Still very satisfied.
by:
Clifton G.
05/25/2019
The Convert-A-Ball is made in USA, appears to be high quality and just what I was looking for. The Draw Bar however was made in China
The Convert-A-Ball appears to be high quality, made in USA and just what I was looking for.
I needed a Draw-Bar to fit 1 1/4" receiver and with 1" shank hole, but nearest I could find was this Draw-Bar with 3/4" hole, so will have to drill out this one. Also was made in China, which I try to avoid although the quality appears to be good.
Wish I had known that the Draw-Bar came with its own Pin & Clip so I wouldn't have ordered that separately, so now I have 2. This why I gave only 4 stars.
Otherwise am happy with the order.
The Convert-A-Ball appears to be high quality, made in USA and just what I was looking for.
I needed a Draw-Bar to fit 1 1/4" receiver and with 1" shank hole, but nearest I could find was this Draw-Bar with 3/4" hole, so will have to drill out this one. Also was made in China, which I try to avoid although the quality appears to be good.
Wish I had known that the Draw-Bar came with its own Pin & Clip so I wouldn't have ordered that separately, so now I have 2. This why I gave only 4 stars.
Otherwise am happy with the order.
by:
Howard A
02/11/2017
Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.
by:
Larry F.
06/10/2016
Unit has worked well and held up. I only removed it once and that was for a week to travel for vacation. The paint is still like new, no rust can be seen. Unit creates no noise while driving with or without a trailer attached, not like a former hitch I had.
by:
Fritz E.
08/03/2017
I like my Draw-Tite hitch and the second ball mount I just purchased so I can switch between 1 7/8" and 2" balls easily. Purchase and delivery through etrailer was effortless. I'm a happy customer.
by:
Richard
06/22/2020
Product is fine. It would have been nice to know that it came with a hitch pin and clip so that I didn't need to order one in addition to the ball mount.
by:
Wade
08/06/2018
Fits well with the Drawtite class 2 hitch and places tongue for my 1/2 utility trailer level.
by:
Marc F
08/01/2017
Easy website to navigate. Found the hitch for our bike rack quickly, and the ordering process was simple. Received my items expediciously too. Will be back for more when needed. Very competitive pricing, too.
by:
Will S.
04/29/2013
I installed this on a 2013 Outback in about an hour and a half. After drilling the holes and spraying the undercoating everything went together without a problem. Wiring harness was just as easy. Nice video to help.
by:
Fred D
09/14/2025
Was a good choice for our needs
by:
mike h
01/02/2015
got my hitch today everything was in the box. I liked the web site it was easy to use . the installation videos are very helpful ,and it was easy to find the hitch for my car . Thanks Great Job. Mike H
by:
Louis
06/26/2020
All of the items order where shipped correctly and the Installation of products where excellent. The how to video’s where very helpful. I would highly recommend etrailer. Installation took me two hours to complete in my driveway.
by:
Edward
06/18/2018
They are very good trailer products I like them and they’ve served me very well. I would be a repeat customer and recommend etrailer to my friends.
by:
David R.
08/19/2013
It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.
by:
John L.
11/10/2014
Finished nicely and fit perfectly, except had to take a file to the inside of the receiver as the punched holes deformed the tube slightly. Now...smooth!
by:
David
11/02/2020
Everything fit perfectly on my 2000 Subaru Forester and is still working a year after installation. I use the trailer every week.
by:
Felix
08/27/2022
Volkswagen ID.4 needs a drawbar no longer than 7" - could not find one local or on [online vendor], but etrailer got me covered. Shipping was fast.
by:
Edwin
04/21/2020
Arrived in a few days even with free shipping.
Installed easy in an hrs time. Have not tried pulling anything yet but should be fine.
Installed easy in an hrs time. Have not tried pulling anything yet but should be fine.
by:
Terry
08/07/2020
Looked everywhere for the right hitch tô fit my Ford Escape. Finally found it here. It fits perfect and delivery was fast. Will definitely be ordering from you again. Thank you.
by:
Joe
03/10/2022
Draw bar fit well and is the right height for my trailer. Thanks to etrailer for giving enough data to choose the right unit.
25
2344
true
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount
- Can I Attach A Hitch Cargo Carrier To A Trailer Hitch On A 2012 Mercedes-Benz E-Class SedanI do have a solution for you that would not require a trailer hitch adapter, meaning you can carry up to 200 lbs on the tongue of your trailer hitch. This is the maximum tongue weight for the trailer hitch compatible with your 2012 Mercedes-Benz E-Class, part # C11001. The tongue weight will include the weight of the carrier and the items you will be carrying. The 20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel - 300 lbs, part # 63155, weighs about 44 lbs, leaving you with 156 lbs...
view full answer... - Trailer Hitch Recommendation for 2018 Volkswagen TiguanThe etrailer Class III hitch part # e43ZR is a confirmed fit for your 2018 Volkswagen Tiguan and would be a great option. It has a 3,500 lb trailer towing capacity as well. For a ball mount you'd want the part # 36051, hitch ball # 19258 for a 2 inch ball or part # 19256 for 1-7/8 inch ball. For trailer wiring you'd then want the part # 118811 which is a confirmed fit.
view full answer... - Trailer Wiring Harness for 2002 Toyota HighlanderThe Plug-N-Tow wiring harness you mentioned, part # 33425 is indeed the correct harness for your 2002 Highlander. The harness is pretty easy to install, using existing connectors located behind the tail light assemblies with an additional wire that is ran to the positive battery terminal. Assuming that you already have a drawbar like part # D-4, Hitch Pin and Clip, # PC3, for a 2 inch receiver or # 36051 for a 1-1/4 inch receiver and the appropriate trailer ball for your trailer, you...
view full answer... - Trailer Hitch for 2002 Toyota Avalon to Tow Dirt BikeI took a look at the owner's manual for your 2002 Toyota Avalon and this vehicle has a maximum towing capacity of 2,000 lbs and a tongue weight capacity of 200 lbs. So while you could use the Draw-Tite trailer hitch # 36293 you would need to tow your dirt bike on a trailer because your bike's 350 lb weight combined with a bike carrier would be more than double the tongue weight capacity of your Avalon. Along with a hitch you would also need to add a 4-way connector to power your trailer's...
view full answer...
- Towing Capacity of 2014 Honda CR-VAccording to Honda the towing capacity for your 2014 Honda CR-V is 1,500 lbs. As long as your trailer is not over 1,500 lb when loaded you'd be totally fine. The Draw Tite hitch part # 36520 that you referenced is a confirmed fit for your vehicle though and would be a great option for a hitch. For a ball mount then you'd need the part # 36051 and for a hitch ball # 19258 for a 2 inch size and part # 19256 for a 1-7/8 inch size. For trailer wiring you'd then want the T-One kit part # 118561...
view full answer... - Modifications Needed for 2014 Chrysler 300S To Install Class II Trailer HitchAccording to the installation instructions for the Draw-Tite Class II trailer hitch, part # 36548, there is no cutting or modification if the bumper fascia required (see linked instructions). However, on 2011 and newer vehicles, there's a plastic appearance panel under the vehicle that would need to be removed and left off the vehicle. There is a trailer wiring harness available, part # C56145. If you'll be towing with this hitch, you'll need a ball mount like # 36051 but remember to account...
view full answer... - Trailer Hitch and Wiring Recommendations/Comparisons for a 2006 Subaru ForesterFor the 2006 Subaru Forester there are only Class II hitches with 1-1/4 inch receivers available. The Draw-Tite hitch # 36311 and Curt hitch # C12038 are both rated for 3,500 pounds gross trailer weight. The Curt hitch is rated for 350 pounds tongue weight and the Draw-Tite is rated for 300 pounds tongue weight. These capacities are greater than what the vehicle is capable of though. According to the owner's manual if the trailer has brakes then the vehicle can tow 2,400 pounds gross...
view full answer... - Everything Needed for a 2005 Hyundai Tucson to Tow a TrailerYou will need five separate parts to tow a trailer with your 2005 Hyundai Tuscon. You will need a trailer hitch, a ballmount, a pin & clip, a hitch ball, and a wiring harness. You have 7 different hitch options for your Tuscon. I would recommend purchasing and installing a hitch with a 2 inch receiver opening over a smaller 1-1/4 inch hitch opening; the larger hitch will give you a lot more options for accessories. Also, we happen to have a very competitively priced Curt Class III Trailer...
view full answer... - Install of Curt C11555 On 2014 Honda CR-V- Can Underbody Panel Be Left Off Instead of TrimmedThat would be entirely up to your discretion. The linked installation instructions for the Curt # C11555 include a diagram outlining exactly where the panel needs to be trimmed, but if you wish you could certainly simply remove the panel and not re-install it. The panel makes the vehicle slightly more aerodynamic, but we're talking by a tiny amount. Not all models of the CR-V have the panel, so leaving it off wouldn't be a big deal. If you'll be using the hitch for some light duty towing,...
view full answer...
- Is Drilling Required to Install etrailer Trailer Hitch # e53AR on a 1995 Dodge DakotaAccording to the installation instructions, you will have to do a little bit of drilling in order to install etrailer Trailer Hitch, # e53AR, on your 1995 Dodge Dakota. I have included a link to the installation details for you to view. With any of the available hitches for your truck, there will be some drilling involved. If you decide to go with this hitch, the ball mount is # 36051 and you can use pin and clip # PC2. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2...
view full answer... - Comparing Weight of 1-1/4 Inch Receiver to 2 Inch Receiver for 2020 Honda CR-VFor your 2020 Honda CR-V, the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36597 has a shipping weight of 24 lbs and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 has a shipping weight of 30 lbs. Even with a towing capacity of 1,500 lbs. I still recommend using the 2 inch receiver because there are more accessory options and sometimes more cost efficient options using that receiver size. For instance the # 36051 is recommended for the...
view full answer... - 2015 Toyota Sienna Se Trailer Hitch Recommendation for Ground ClearanceThe rear of your 2015 Toyota Sienna does sit pretty low. For a trailer hitch for your vehicle the best option is going to be the smaller 1-1/4 inch trailer hitch size like the part # 36513 as it will offer slightly better ground clearance than a 2 inch hitch. For a ball mount you would need the part # 36051, 2 inch hitch ball # 19258 or 1-7/8 inch ball # 19256. For trailer wiring you would then want the # 118498.
view full answer... - What is the Towing Capacity of a 2013 Honda CR-VYou are correct, the trailer hitch is rated higher than the 2013 Honda CR-V but you still have to go by the weight capacities of the vehicle since they are lower. So you will want to stay within the manufacturers 1500 pound limit, even though the hitch is rated higher. The 2300 pound trailer is going to be too much for the CR-V. You would either need a different tow vehicle or an even lighter trailer. If you go with a lighter trailer then you will also need a ball mount, pin and clip,...
view full answer... - Trailer Hitch Recommendation for a 2000 Toyota AvalonWe have a trailer hitch for your 2000 Toyota Avalon, but the Draw-Tite hitch that you have from a Toyota Sienna will not fit the Avalon. They have different mounting locations and hitch designs. For your Avalon, I recommend the Draw-Tite Class II Trailer Hitch, # 36293. If you plan on doing some light towing, then you will also want to pick up the following items Wiring harness - # C59496 Ball Mount - # 36051 2 Inch Hitch Ball - # 19258 or 1-7/8 Inch Hitch Ball - # 19256 (hitch ball...
view full answer... - Installing Brakes On A Trailer Towed By 2004 Subaru ForesterI researched the owner's manual for your 2004 Forester and found the chart for towing a trailer. If you have a manual transmission you can tow a trailer with no brakes that weighs 1000-lbs or less. If the trailer has brakes you can tow up to 2400-lbs. If you have an automatic transmission you are limited to 1000-lbs if the trailer has no brakes and 2000-lbs if the trailer has brakes. It may be more cost-effective to find a trailer that already has brakes installed. Adding brakes to...
view full answer...
- Recommended Towing Package For 2011 Kia Sorento 4 CylinderIf your 2011 Kia Sorento does not have the dual exhaust system with a tailpipe on both the driver and passenger side, I recommend the Draw-Tite Class ll Hitch, part # 36511. This hitch has a 1-1/4 inch receiver opening. I have attached an installation video for this hitch on a Sorento you can check out. You may be interested in a Draw-Tite Ball Mount like part # 36051. This drawbar provides a 5/8 inch rise or a 1-1/4 inch drop and measures 7 inches from the center of the hitch pin hole...
view full answer... - Hitch for 2019 Toyota Camry to Tow Motorcycle Trailer with 565-lb Harley DavidsonI'll start off by mentioning that from my research, it looks like the weight of the Stinger Folding motorcycle trailer you're looking at weighs in at around 220-lbs. When you add the 565-lb Harley to the trailer, you're looking at a total weight of a little less than 800-lbs. You'll want to consult your owner's manual for confirmation on the towing capacity of your 2019 Toyota Camry, but using the Curt # C11576 should allow you to tow that setup without any issues (I'm showing the towing...
view full answer... - Comparison Between Hidden Hitch # 90089 and Draw-Tite # 36520 for 2014 Honda CR-VDraw-Tite and Hidden Hitch are both sister companies that are owned by the same parent company, Cequent Performance Products. Both hitches are identical. The hitches share the same weight capacity, installation would be the same and the quality would be equal. If you'll be using the hitch for towing, you'll need the ball mount, part # 36051. You'll also need the trailer wiring harness, part # 118561 and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball, part # 19258. I've provided...
view full answer...
- Dimensions For 1-1/4" Ball Mounts From Ends Of Mount To Receiver Hitch PinsHere are the measurements for each of the ball mounts that you requested. I took measurements from the center pin to both ends of the ball mount. I have included images with the measurements as well. Draw-Tite Drawbar # 36051 8-3/8" and 1-15/16". Curt Class II Drawbar # C45519 10-3/4" and 1-1/2". Draw Tite Drawbar # 36053 11-1/16" and 2". Curt Class I Drawbar # C45019 10-7/8" and 1-7/16".
view full answer...
- Least Noticable Trailer Hitch for a 2003 Toyota Avalon XLSThe least noticeable trailer hitch we offer for your 2003 Toyota Avalon XLS is the Draw-Tite # 36293. This Class II trailer hitch has a towing capacity of 300lbs tongue weight and 3,500lbs towing weight. You will want to be sure that your vehicle is capable of supporting this type of weight, just because the hitch is designed to doesn't mean the vehicle can, be sure to check your owners manual. Some other items you will need to tow a small trailer are a ball mount and a ball like # 36051...
view full answer...
- How to Determine the Correct Ball Mount for a 2010 Ford Escape with 1-1/4 Inch Trailer HitchGiven that the trailer hitch on your 2010 Ford Escape has a 1-1/4 inch receiver indicates that it is a either a Class I or Class II trailer hitch. With Class I and II hitches you are supposed to use the ball mount specified by the hitch manufacturer for warranty reasons. Class I and II hitches are tested with and given their rating based on a specific ball mount which is why you are supposed to use that specific ball mount. If it is an aftermarket hitch from Reese or Draw-Tite you would...
view full answer... - Towing Capacity of 4 Cylinder 2012 Chevy Equinox and Parts Needed to TowI checked the owner's manual for a 2012 Chevy Equinox and found that the 4 cylinder models have a 1,500 pound towing capacity if the trailer has brakes. If the trailer does not have brakes it is limited to 1,000 pounds gross trailer weight. So it can tow provided that the gross trailer weight capacity is within the capacities listed above. Draw-Tite trailer hitch # 36408 is a great choice for your Equinox but it is limited to the capacity of the vehicle. I have linked a video showing installation...
view full answer... - Does Tow Hook Have To Be Removed For All Trailer Hitches On 2011 Mitsubishi Outlander SportI did some research and found that all of the trailer hitches we offer for your 2011 Mitsubishi Outlander Sport require the removal of the tow loop. I recommend the Curt trailer Hitch, part # C13079. This is a Class lll hitch and has a 2 inch receiver opening. One note from Curt is that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps, like part # 18050. Failure to properly support these loads will void your hitch warranty from...
view full answer... - Compatibility of Hitch for 2005 Chevy Impala and 2007 Pontiac Grand PrixA hitch designed for a 2005 Chevy Impala would not be compatible with a 2007 Pontiac Grand Prix. Although the vehicles are fairly similar, the differences in the hitch attachment points between the two vehicles are significant enough to make it impossible to interchange the hitches. For your 2007 Grand Prix, I would recommend the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12225. If you need to wire the vehicle for trailer lights, I recommend the Curt T-Connector,...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Updated by:
Mike S
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Adam E
Video by:
Chris R
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lee
10/25/2016
I am still happy with the items. However, I have not used them much over the past few months. But, they will get much more use in a couple of weeks. I am putting the finishing touches on a camper that I have been building for half a year.thanks,