bing tracking image
  1. Tow Bar Base Plate
  2. Demco
  3. Removable Draw Bars
  4. Twist Lock Attachment
  5. Completely Hidden
THIS ITEM IS NOT A FIT FOR
2005 Ford Excursion
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Demco

Demco Tabless Base Plate Kit - Removable Arms

Part Number: DM9519308
$487.83
Retail:$702.00
You Save: $214.17
Tow Bar Base Plate
Not Confirmed to Fit

2005 Ford Excursion

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation. Great Prices for the best tow bar base plate from Demco. Demco Tabless Base Plate Kit - Removable Arms part number DM9519308 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (457)
  • Q & A (0)
  • Photos

Demco Tow Bar Base Plate - DM9519308

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Ready for Flat Towing: Creates solid tow bar connection points for dependable RV towing.
  • Blends In When Not Towing: Tabless design keeps the front end clean with no visible brackets.
  • Hooks Up Fast: Twist-lock arms let you connect or remove your tow bar in seconds.
  • Built to Last: Durable steel construction spreads towing force evenly and resists wear.
  • Stays Protected Between Trips: Snap-on receiver covers keep dirt out and prevent seizing.
Made in USA

Features to know about

Made for a Clean Front End: Tabless Base Plate with Hidden Receivers

When you’re not towing, this setup keeps the front of your vehicle clean and uncluttered. The tabless design means there’s no crossbar or bulky brackets sticking out, and the tabs stay on your tow bar—so there’s nothing left behind on the bumper. When you’re done towing, just pop on the included high-density polyethylene covers to keep dirt and debris out of the receivers, preventing corrosion and making it easier to connect next time.

Close-up of Demco base plate receiver covers installed to protect tabless base plate openings when not towing

Protective receiver covers installed on Demco tabless base plate to prevent dirt buildup when not towing

Hook Up Fast and Secure: Twist-Lock, Pin-Secure Arms

Connecting your tow bar is quick and solid with the twist-lock system. Each arm slides into the receiver, twists to lock in place, and secures with the included pull pin. Removing them is just as simple—pull the pin, twist, and slide out. It’s a straightforward setup that makes solo hook-ups easy and reliable every time. The distance between brackets is 33" and bracket height is 21", giving you clear reference points for alignment.

Demco Tabless Base Plate Kit attached to tow bar arms showing simple twist-lock hookup on a vehicle front receiver

Demco Tabless Base Plate Kit connected to tow bar arms highlighting quick twist-lock hookup feature

Built for Long-Haul Strength: Steel Construction That Spreads the Load

This base plate bolts securely to the chassis with no welding required. Its sturdy steel build spreads towing forces evenly to reduce stress on your suspension while keeping things stable on long hauls. The dependable design gives you confidence that your connection will hold up through thousands of miles of travel.

Keep Your Existing Tow Bar: Broad Compatibility and Adapter Options

If you already have a tow bar you like, there’s a good chance it’ll work here. This base plate pairs directly with all Demco Victory Series tow bars, and it can be adapted for use with Demco Kwik-Tow and other manufacturers’ bars (adapters sold separately). There’s even an electrical bracket included so you can easily mount a round connector plug up front for a clean wiring setup.

Demco base plate adapter for Kwik-Tow and other aftermarket tow bars shown on white background

Demco Kwik-Tow base plate adapter displayed to show compatibility with various aftermarket tow bar systems

DIY-Friendly Install: Bolt-On Kit with Included Hardware

This is a bolt-on job that doesn’t require welding or fabrication. Everything you need comes in the box—hardware, instructions, and an electrical bracket—so you can get it done in a home garage with basic tools. Once it’s mounted to the chassis, you’ve got a permanent setup that’s easy to use every time you tow.

Specs

Dimensions

  • Distance between brackets: 33"
  • Bracket height: 21"

Compatibility

  • Roadmaster Tracker, Falcon 2, Falcon All-Terrain, Blackhawk, Blackhawk All-Terrain, and Sterling tow bars with serial numbers up to 14,500: DM9523036
  • Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, and Sterling tow bars with serial numbers 14,501 and above: DM9523062
  • Roadmaster Eagle and Eagle 8000: DM9523014
  • Roadmaster Falcon 5250: DM9523023
  • Blue Ox: No adapter needed
  • etrailer: No adapter needed
  • Demco Kwik-Tow: No adapter needed
  • Curt Rambler: No adapter needed
  • Curt Seeker: No adapter needed

Warranty

  • Warranty: 1-Year limited warranty

9519308 Demco RV Tabless Baseplates

Installation Details DM9519308 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.7

457 reviews
5 Stars
(384)
4 Stars
(50)
3 Stars
(12)
2 Stars
(2)
1 Star
(9)
Review Sort Icon
by:
Jeep Cherokee
Really good tow bar. It has pulled my Jeep Cherokee for over 7,000 miles this year with no issues. Only problem was when I had to do a u-turn with minimal turning room and one of the storage pins on top of the tow bar got bent.
by:
2015 Jeep Cherokee
Awesome product but definitely not for home installation. However once installed it’s simple to attach and detach towed. We tow a Cherokee behind a 40’ class A. You can hardly tell it’s there. It takes me less than 15 minutes or less either way.
by:
Great Item - Very heavy duty. Installation is being conducted at this point in time by Boubin Inc. Cedar Rapids Iowa.
by:
2016 Jeep Cherokee
Great product and arrived quikly
by:
by:
I gave this 5 stars based on design and durability.Installation, however, is somewhere between 3 and 4 stars. Installation can be a real challenge, and even the best back yard mechanic might be a tad frustrated. The biggest problem in installation is NOT installing but getting ready to install. Removal od the tow bar hooks took more time than installing the base plates. We're talking a 2018 F-150 XLT Sport 4X4 crew cab. The pics show the finished product and the location of the safety can\bles.
by:
2024 Jeep Wrangler
Just installed the Demco Tabless Base Plate and included 6 pin wire bracket. It was very straightforward and anyone who is a little mechanically inclined, can do it with ease. The etrailer video was incredibly helpful. I followed it step by step and had no issues. I love that it is a direct bolt-to-frame base plate and does not need any modifications. I spent a bit more time cutting out the gravel guard to form-fit the tabless connectors. The adapters are sleek and blend right in to the front end. Love how it turned out.
Nick S. profile picture
Etrailer Expert

Nick S.

11/24/2025

That is great to hear! I am glad the install went well for you and that you were able to use our video for help. What are you towing your vehicle with?

by:
2025 Ford Maverick
Was able to install without issues using 2 washers between base plate and the upper brace and none on the bottom, otherwise followed the video. Works great!
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/2/2026

Install looks great! When's the first trip you're taking the Maverick on?

by:
Now that I have actually used the tow bar and base plates I am very happy with my purchase. Sets up easy and when not in use the cover plates make for a great appearance on the truck.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/14/2025

Set up looks great, Henry! Where was your first trip with everything?

Henry profile picture

Henry

10/14/2025

@LazerS, We went to Solomons Island MD for a shakedown trip.
by:
The Demco Tabless Base Plate Kit with Removable Arms was an excellent choice for our 2026 Ford Maverick. We just completed our first trip using it, and the system performed flawlessly.

I especially appreciate the clean, minimal appearance when the removable arms are out. There are no prominent brackets left showing, and installation required no modifications to the fascia or grille—both were very important to us.

We also used etrailer’s installer locator to find Big Country Trailers and Toppers in Montrose, Colorado, and they did a fantastic job with the installation. We are extremely pleased with the fit, appearance, and performance of this base plate kit, as well as the installer experience.
by:
The base plate kit was fairly easy to install; however, I did need to space out the main base plates with washers of about a good 1/8th inch to clear the lower radiator. I also fabricated an L shaped shelf and u-bolts to attach to front of main cross member to mount 6 pin connector and break-away switch. All appears to be good and solid. Have not attached to RV yet as I am still working on wiring.
by:
I would give the tow bar a minus numberif possible. I bought it in hopes of not cutting up the shutter housing on my 2025 Maverick Hybrid. Well the bolt holes did not line up. I spoke with the Demco Engineers about the issue and they said that I must have a bent frame. My vehicle was two weeks old from the manufacturing date and all the rest of the pieces in the front assembly fit perfectly from Ford. I lad less then 200 miles on the unit. I made some cuts in the bar to allow more movement with the approval of Demco and still I could not get the front facia on. I called installers and they said they just cut away whatever is needed to get a tow bar on. None that I talked to at 3 places had as yet done this model installation. E trailer accepted my return and I put a roadmaster bar on.
by:
I use only Demco baseplates as they are the only brand that mount with no cutting or drilling. The Excalibar tow bar is very well made and handles my Jeep Gladiator with ease. It's also very simple and easy to hook and unhook. The excellent "how to" videos from etrailer sure helped me make the correct purchase decision.
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/7/2025

Why thank you, Gerald! Glad we could get you on the right path to towing. Where all have you taken the Gladiator?

Gerald B. profile picture

Gerald B.

4/8/2026

The Demco base plate for our 2025 Jeep Gladiator is still the best choice out there. It required no drilling or cutting and is easily swapped out as we lease our Jeep and need to put it on the next Jeep every year. Also very easy to hook up and very robust construction.

by:
Bottom bolts seem kind of a weak install in my opinion, I was able to put my facia back on with not cutting so that was good.
Kate F. profile picture
Etrailer Expert

Kate F.

3/25/2026

Just as long as you torqued them down to spec, you will be just find Pete. Where did you go for the first trip?

by:
2025 Ford Ranger
This does not fit my 2025 ranger. I attached are a few images of the mounting location for the 9519343 base plate on my 2025 Ford Ranger with the Lariat trim and the 2.7l v6 motor. The aluminum colored piece interferes with the horizontal bar connecting the actual base plates. The base plate mounting holes are 31.5" apart, whereas the receiving nuts on the truck frame are 30.5" apart. I am returning this and have ordered a Blue Ox base plate.
by:
Straight forward install. I have towed the Maverick about 7000 miles with no issues. The pins are a wee bight tight when mating to my Blue Ox tow bar. But that is loosening with time. A nice improvement would be a heavy duty mount for the umbilical plug
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

3/14/2025

Hey Richard, great feedback on the heavy duty mount I can send that along to Demco. Sounds like you have been to some awesome places between all those miles. Is there a place you would consider a must go to that you have traveled to?

Richard profile picture

Richard

3/14/2026

1.5 years later, 15k miles later, zero issues with baseplate, still estatic about the maverick as a toad

by:
2018 Ford Expedition
Lock tight both TUBES hard as a rock.
YOU Don't need lock tight at all as all threads in the nuts are lousy and no way to hand start anything. Had to run 4 or 5 bolts through each nut with an impact to free them up a bit. They should have piolet starter on each bolt and all threads should be clear enough for a hand start. This kit worked well as it does not require the bumper to be removed. BUT: LOUSEY BOLTS AND NUTS ADDED AT LEAST 30 MIN TO FIGHTING EVERY BOLT TO GET IT STARTED. 5 STARS FOR THE KIT. 1/2 STAR FOR THE BOLTS WITHOUT PIOLET AND NUTS THAT CAN NOT BE HAND STARTED.
by:
2001 jeep Wrangler
Order was shipped and received timely. Both products purchased look to be well made. Haven’t installed yet currently using a demco set up on a 2001 Cherokee sport. Up graded to a 2020 wrangler needing a new base plate and lighting. Eager to install on the new buggy!
by:
ford Ranger
Very easy to install except for one item. The core support bolt holes need to be moved out about 1/4 inch. Had to trim the hole on the plastic shutter surround. Otherwise great fit on 2026 Ford Ranger. I’ve done many of these and this was the easiest. Price is definitely too much. Haven’t towed with it yet but looking forward to it.
by:
2024 Ford Bronco
This was NOT the easiest install. Lots of grinding and cutting of stock parts. Then the effort required to align all the holes after said grinding and cutting took considerable effort. eTrailer needs to do specific video on this product so buyers know what to expect. I can say this product is worth the effort but boy oh boy know what you’re getting into.
by:
Product seems very well designed and manufactured. Minor reaming of a couple of the holes was needed to align with truck frame. We used it with a Blueox tow bar so towing was flawless. I highly recommend this base plate.
Ronald profile picture

Ronald

12/22/2025

Base plate has performed flawlessly over approximately 16,000 kilometers of towing. Highly recommend.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

12/22/2025

@Ronald Wow! Sounds like some serious traveling! What kind of travel plans are you looking forward to in 2026?
by:
2025 Ford Maverick
Super Duper customer support! I had an issue with a product and Lauren got me all set up on what I needed to get the job done in a fast time frame.
Jeremiah profile picture

Jeremiah

9/28/2026

Year in and as good as day one. We have zig zagged across the us and back this year and love the base plate.

Christopher H. profile picture
Etrailer Expert

Christopher H.

9/28/2026

@Jeremiah Happy to hear the # DM38CV is holding up well. You have any trips planned for the fall?
by:
2026 Jeep Wrangler
Quality product with fast free shipping. Although it arrived with damage to the box from the baseplate moving around during shipping, there was no damage to the baseplate itself. Installed relatively easily according to the instructions.
by:
The quality and fit up was great, the only comment is the safety cables are too short and not able to use them. If you are looking at this product i would recommend it, just keep in mind you have to buy cables
by:
The face plate fit very well on my 2024 Jeep Grand Cherokee L, Overland. Even though on the Etrailer website, it says it will not fit, but it definitely does. The instructions are a little vague about which way to turn the center crossbar. In my case, I had to turn it upside down from how it shows in the parts layout on the front page of the instructions. Also the photo below showing the installation without the bumper cover on, has it the wrong way for my vehicle. I turned it over after I took that photo. I opted not to cut up the lower honeycomb grill and just leave it off, which allowed me to install the 6-pin connector and the breakaway switch very neatly with the supplied bracket. And if I ever remove the face plate, I can put back the original honeycomb grill and the vehicle will be 100% back to as purchased. I did not have to drill any holes whatsoever for the installation.
25
457
true
Show More Reviews

See what our Experts say about this Demco Tow Bar Base Plate

  • Install Video for etrailer Base Plate Kit that Fits 2017 Jeep Cherokee Trailhawk
    I attached an install video that will show you the entire install process of the etrailer base plate kit part # e98952....but the base plate kit is the Demco part # DM9519308 that's in the video which is essentially the exact same thing. Demco and etrailer base plate kits are made by same company.
    view full answer...
  • Parts Needed For Flat Towing a 2016 Jeep Cherokee Trailhawk
    Here is a list of the base plates that will work with your 2016 Jeep Cherokee Trailhawk. Roadmaster Direct-Connect Base Plate Kit # RM-521446-5 etrailer Invisible Base Plate Kit # e98952 Demco Tabless Base Plate Kit # DM9519308 Curt Custom Base Plate Kit # C46JR I feel the Roadmaster # RM-521446-5 is the best in terms of quality and longevity if you are needing a whole new setup for towing your Trailhawk. With this baseplate fitted in our shop we found it has a height of 18-1/4" to the...
    view full answer...
  • Towing a 2014 Jeep Cherokee Trailhawk Behind an RV
    The images of the parts you mentioned are there to show you where they would install but they are not included. If you look at the parts list you will notice that they are not included. That is a bit confusing though. The reason they are not included is because there is no way to tell what a given person might need for wiring and if they are even using a supplemental braking system that has a breakaway system, if they are using one at all. Demco base plates # DM9519308 are designed for...
    view full answer...
  • Does Install of Base Plate Kit on 2016 Jeep Cherokee Trailhawk Remove Tow Hooks
    The Demco Base Plate Kit part # DM9519308 requires the removal of the tow hooks on the front of your 2016 Jeep Cherokee Trailhawk. If you check out the attached picture you'll see that the base plate kits basically replaces the tow hooks. There are safety chain loops on the base plate kit that could be used in a similar way as the tow hooks.
    view full answer...
    Image 1 for
  • etrailer e98952 Tow Bar Base Plates-2017 Jeep Cherokee Trailhawk; Adapter for Blue Ox Base Plate
    The etrailer brand # e98952 base plates are a fit for the 2014 - 2018 Jeep Cherokee 4WD Trailhawk edition, so it will fit your 2017 Cherokee Trailhawk as long as its a 4WD model. FWD models must be towed on a tow dolly like # RM-2050-1. There is an adapter available, part # DM9523127 which will allow the base plate to work with with the following Blue Ox Tow Bars: -Aventa II -Avail -Aventa LX -Adventurer -Aladdin -Alpha -Acclaim -Allure I don't have any installation footage for the #...
    view full answer...
  • Can 2015 Jeep Cherokee Trailhawk be Flat Towed Behind Motor Home and Parts Needed
    I took a look at the online copy of the owner's manual for a 2015 Jeep Cherokee and it can be flat towed so long as it is a 4-Wheel Drive and has a 2-Speed Power Transfer Unit so you will need to contact the dealer to find out if this Cherokee has those features. If it is a 4WD with a 2-speed transfer case there are a number of parts you will need, starting with vehicle-specific base plates. I'll list all the parts you need: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519308 -...
    view full answer...
    Image 1 for
  • All Parts Needed to Flat Tow 2017 Jeep Cherokee Trailhawk
    I can absolutely give you a summary of all the parts that are needed in order for you to flat tow your 2017 Jeep Cherokee Trailhawk. You'll need base plates, a compatible tow bar, safety chains, wiring, and a supplemental braking system, all of which I'll list for you: - Demco Tabless Base Plate Kit # DM9519308 - Demco Commander II Non-Binding Tow Bar # DM9511012 - Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 - Wesbar Coiled Adapter - 7-Way RV to 4-Way or 5-Way...
    view full answer...
  • Is Brake Light Relay Kit Required for Flat Towing a 2015 Jeep Cherokee Trailhawk
    Yes, you will need to use the Brake Light Relay # RM-88400 since you are using the Blue Ox Patriot # BLU37TR, even though you are using the Hopkins Wiring Kit # HM56208 on your 2015 Jeep Cherokee Trailhawk. The relay kit is just required for any braking system that physically pushes on the brake pedal like what the Patriot does. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a...
    view full answer...
  • Does the Demco Tabless Base Plate Kit Replace Tow Hooks on a 2015 Jeep Cherokee Trailhawk
    Yes, you will need to remove the tow hooks on your 2015 Jeep Cherokee Trailhawk to install the Demco Tabless Base Plate Kit # DM9519308. If you wanted to use the tow hooks then you would have to uninstall the base plate kit. There is no horizontal bar that installs behind the front bumper of your Cherokee and goes from one mount to the other. These connect directly to the frame of the vehicle itself. I am not sure what other part numbers you are talking about but I wonder if they are generic...
    view full answer...
  • Does Demco Tabless Base Plate Kit for 2015 Jeep Cherokee Require Removable Arms Separately
    The Demco Tabless Base Plate Kit # DM9519308 that you referenced comes with removable arms and does not require you to order them separately. That said we do not have an adapter for this to fit to a ReadyBrute Elite tow bar so hopefully ReadyBrute has a solution. We only have a Blue Ox adapter part # BX88297 but that would require you to use a Blue Ox base plate instead # BX1138.
    view full answer...
  • Best Tow Bar for a 2016 Jeep Cherokee Trailhawk
    The absolute best tow bar that is offered for your 2016 Jeep Cherokee Trailhawk is the Demco Dominator Tow Bar part # DM9511008. The reason for this is because it is mostly made of aluminum which means it is lightweight (only 30 lbs), has self-supporting arms that will not fall to the ground when unhooked, and has a unique hitching procedure that does not require you to step over the bars once you have made the final connection. It also has the same self-aligning and non-binding design...
    view full answer...
  • All Parts Needed to Flat Tow 2014 Jeep Cherokee & Can They be Self-Installed
    Many people install complete flat towing set ups themselves, so yes, self-installation is definitely feasible. I can't comment if you, specifically. need a specialist for install, so you'll need to read through the directions of each individual part to see if it's something you feel like you'd be able to do. Having said that, here are all the parts you need in order to flat tow your 2014 Jeep Cherokee: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519308 - Tow Bar: etrailer SD...
    view full answer...

Do you have a question about this Tow Bar Base Plate?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Randy B
Test Fit:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Matthew E
Updated by:
Matthew E
Employee Noah M
Updated by:
Noah M
Employee Manda E
Updated by:
Manda E
Employee Amanda K
Updated by:
Amanda K
Employee Zach D
Video by:
Zach D
Employee Kristina F
Written by:
Kristina F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924