Tie Down Straps

Hey William, If you have a Torklift tie down setup for your camper you would want to use turnbuckles that have springs built in like the Torklift Basic SpringLoad part #TLS9000 that you referenced on all four corners. What tie downs do you have?

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing into…

Hey Roger, I was able to pull up the dimensions of the battery you have now and found that the Bright Way replacement battery part #3801250 is exact same dimensions and is also a 5 amp hour battery so it would work great for you.

Hi Brian, If your 2023 Toyota 4Runner doesn't have a tow package but has the 4-way and 7-way connector on the back, you should have a wiring harness run to the 4/7-way. They don't include the custom harness or brake controller to connect to…

The mounting bolts that come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 are 3/8" diameter x 1-3/4" long. I have attached a review video of these straps for you to check out as well.

Great question Jake, The Pace Edwards JackRabbit part part #311-M-JRFA05A28 will not work with your System One Contractor Rig ladder rack, but the Pace Edwards Full-Metal JackRabbit with Explorer Series rails part #311-FEFA05A28 is the version I…

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…

Hey Steve, we have the Redarc Tow Pro Liberty with Custom Harness part #RED82CR that fits your 2021 Toyota 4Runner and would not require any additional diodes. This harness was designed for the tow package of your 4Runner so it would not cause any…

Hi Bill, that’s a really good question and I’m glad you’re double checking before installing anything on your bunks. The Tie Down Marine Slides part #TD49FR are designed to work with fiberglass hulls and are commonly used on fiberglass boats without…

Hi FP, I’m really glad you asked before ordering. Yes, there is a version made specifically for 2x4 bunks. You’ll want the Tie Down Marine Slides for Boat Trailer Bunks – Fits Two 8' Long 2x4 Bunks part #TD99FR. These are designed to mount…

Hey Zak! The Rhino-Rack ROC25 Roof Rack for Naked Roofs #RR45GR can support up to 165 lbs. This is confirmed to fit your 2016 Honda CR-V assuming you have no existing rails or crossbars. What will you be carrying on the roof rack?

Hey William, If you have a Torklift tie down setup for your camper you would want to use turnbuckles that have springs built in like the Torklift Basic SpringLoad part #TLS9000 that you referenced on all four corners. What tie downs do you have?

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing into…

Hey Roger, I was able to pull up the dimensions of the battery you have now and found that the Bright Way replacement battery part #3801250 is exact same dimensions and is also a 5 amp hour battery so it would work great for you.

Hi Brian, If your 2023 Toyota 4Runner doesn't have a tow package but has the 4-way and 7-way connector on the back, you should have a wiring harness run to the 4/7-way. They don't include the custom harness or brake controller to connect to…

The mounting bolts that come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 are 3/8" diameter x 1-3/4" long. I have attached a review video of these straps for you to check out as well.

Great question Jake, The Pace Edwards JackRabbit part part #311-M-JRFA05A28 will not work with your System One Contractor Rig ladder rack, but the Pace Edwards Full-Metal JackRabbit with Explorer Series rails part #311-FEFA05A28 is the version I…

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…

Hey Steve, we have the Redarc Tow Pro Liberty with Custom Harness part #RED82CR that fits your 2021 Toyota 4Runner and would not require any additional diodes. This harness was designed for the tow package of your 4Runner so it would not cause any…

Hi Bill, that’s a really good question and I’m glad you’re double checking before installing anything on your bunks. The Tie Down Marine Slides part #TD49FR are designed to work with fiberglass hulls and are commonly used on fiberglass boats without…

Hi FP, I’m really glad you asked before ordering. Yes, there is a version made specifically for 2x4 bunks. You’ll want the Tie Down Marine Slides for Boat Trailer Bunks – Fits Two 8' Long 2x4 Bunks part #TD99FR. These are designed to mount…

Hey Zak! The Rhino-Rack ROC25 Roof Rack for Naked Roofs #RR45GR can support up to 165 lbs. This is confirmed to fit your 2016 Honda CR-V assuming you have no existing rails or crossbars. What will you be carrying on the roof rack?