Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.
This heavy-duty, low-profile trailer with 78" crossbars has extensive space to mount accessories like watersport carriers, bike racks, a fishing rod carrier, or a cargo box (sold separately). Because of the trailer's low-profile design, the crossbars sit only 22" off the ground. The lower crossbars provide a safe height to load heavy kayaks and help avoid unnecessary overhead lifting.
With a 7-1/2' tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Lazer S.
11/18/2025
Glad to hear you had fun with it, John! I have always enjoyed putting things together (and taking other things apart), and when it's something that will get use, it's just the icing on the cake! : ) Looks like you have it set up for carrying a kayak? What do you have?
Jenny N.
8/10/2023
Why the blank face? If you have any questions or concerns please reach out to me.
Dean
7/3/2025
The trailer has performed perfectly for us. This is the third season with it, and weve traveled well over 2500 miles with it. The lighting issue I described in the previous review still exists, but no more additional lights have quit so I havent had to replace the light fixture. We are thrilled with the trailer!
Jon G.
7/4/2025
Lazer S.
5/29/2026
Glad to hear you are liking it, Anthony! I can definitely see why loading it on a roof rack wouldn't be the most "pleasant" thing to do! That's quite the kayak! Where do you typically take it out? I did a little bit of kayaking in my youth, but I preferred the lay down style paddle boards. There are a lot of lakes and rivers here in Missouri though, so I might try out a kayak again.
Michael
1/28/2024
Only one issue otherwise a great trailer for my Blue Sky Boat Works Angler 360. The issue is 3 of the individual tail light LEDs have failed. To eTrailer support, does this require a whole tail light replacement or just the 3 individual LEDs?
Jenny N.
1/29/2024
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
1/5/2026
I am glad it is working great for you! I have assembled a few of these myself and it is not the quickest thing in the world. Looks great with your kayak loaded as well!