Kenda Trailer Tires and Wheels - KE35EV

Radial tire has a ply rating of 6 and a 1,350-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel has a 5 on 4-1/2 bolt pattern and a corrosion resistant, silver powder coat finish.

Features:

• Tire-and-wheel assembly is ideal for stock trailers, utility trailers, and campers
• Steel wheel with modular design is sturdy and corrosion resistant
  • 2-Step finishing process includes e-coat primer and silver powder coat finish
• Kenda Karrier KR53 special trailer radial tire is low-weight, providing better fuel economy on long trips
  • Created specifically for trailers and not intended for use on other vehicles
• Sidewalls engineered for enhanced durability and resistance to ozone exposure
• Computer-optimized wide tread design and premium rubber-compound materials offer superior traction in wet or dry conditions
• Assembly meets DOT specifications

Specs:

• Rim dimensions: 13" diameter x 4-1/2" wide
• Bolt pattern: 5 on 4-1/2"
• Wheel bolt size: 1/2"-20
• Pilot diameter: 3.19"
• Tire size: ST175/80R13
  • Section width: 6.7"
  • Outer diameter (when inflated): 23.8"
• Tire capacity:
  • Load range: C (6-ply rating)
  • Maximum load capacity: 1,360 lbs at 50 psi
• Warranty:
  • 1-Year on tire
  • Limited 2-year on wheel

1-Year Worry-Free Guarantee

This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

35361 Karrier KR53 ST175/80R13 Radial Tire with Silver Dexstar Modular Rim - 5 on 4.5 - LRC