bing tracking image
  1. Trailer Lights
  2. Peterson
  3. License Plate Lights
  4. LED Light
  5. White
  6. License Plate
Peterson Great White LED Trailer License Plate Light - Top Mount - 1 Diode - Clear Lens
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Peterson

Peterson Great White LED Trailer License Plate Light - Top Mount - 1 Diode - Clear Lens

Part Number: M290C-BT2
In Stock
$14.80
Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
3" x 1-1/16" x 1-9/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount above license plate. 2-Wire lead with 0.180 bullets. Great Prices for the best trailer lights from Peterson. Peterson Great White LED Trailer License Plate Light - Top Mount - 1 Diode - Clear Lens part number M290C-BT2 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (118)
  • Q & A (0)
  • Videos (2)
  • Photos

Peterson Trailer Lights - M290C-BT2

Highlights

  • Brighter Plate Lighting: Ultra-bright white LED and custom-cut lens optics keep your license clearly visible.
  • Fewer Replacements Needed: LED lasts up to 50 times longer with no bulbs or filaments to fail.
  • Low Power Draw: Efficient LED design delivers strong light output with minimal amperage use.
  • Simple Install: 2-wire surface mount with 0.180 bullets and 2" hole spacing fits easily above your plate.
  • Built to Last: Durable black housing and clear lens hold up to road wear and weather.
  • Road Legal: DOT compliant so your trailer lighting stays within regulations.
Made in USA

Features to know about

Clean, Even License Plate Illumination: Ultra-Bright White LED

Dim or uneven plate lighting can make your trailer hard to see at night. This Peterson Great White LED light uses a single ultra-bright white diode paired with a custom-cut clear lens to spread light evenly across your license plate. It’s compact at 3" long x 1-1/16" tall x 1-9/16" deep, so it fits neatly above the plate while delivering a crisp, consistent glow that keeps things clearly visible and DOT compliant.

No More Bulb Swaps: Long-Lasting LED Design

Dealing with burned-out bulbs or fragile filaments gets old fast. This light solves that problem with a solid-state LED that lasts up to 50 times longer than old incandescent styles. There are no bulbs to replace, and because LEDs run cooler and draw less power, you’ll get bright light without extra strain on your 12V DC system. It’s the kind of upgrade you install once and don’t have to think about again.

Tough Build for Everyday Use: Durable Housing and Lens

Vibration, weather, and road grime can take a toll on trailer lights. The Great White’s durable black housing and clear lens are built to handle those conditions without fading or cracking. You get dependable performance whether it’s mounted on an enclosed trailer, utility hauler, or anything in between.

Quick and Simple Wiring: 2-Wire Connection with Bullet Leads

Wiring doesn’t have to be complicated. This light uses a straightforward 2-wire system—one for power and one for ground—with 0.180 bullet leads for an easy hookup. Mounting is just as simple with two surface-mount holes spaced 2" center-to-center. It’s an easy DIY upgrade that gives you clean wiring and reliable illumination for the long haul.

Specs

Dimensions

  • Overall dimensions: 3" long x 1-1/16" tall x 1-9/16" deep
  • Distance between mounting holes (center on center): 2"

Technical diagram of the Peterson Great White LED Trailer License Plate Light, showing measurements and mounting hole spacing for installation reference.

Electrical

  • Diodes: 1
  • System compatibility: 12V DC

Warranty

  • Warranty: 10-Year limited warranty

M290C-BT2 Peterson Great White LED Trailer License Plate Light - Top Mount - 1 Diode - Clear Lens





Video of Peterson Great White LED Trailer License Plate Light - Top Mount - 1 Diode - Clear Lens
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hands-On with the Peterson Great White LED Trailer License Plate Light

Today we're gonna take a look at the Peterson Great White Top Mount, LED Trailer License Plate Light. Now this is a nice compact LED light that illuminates your trailer's license plate. Uses a single LED light, which will meet DOT requirements when it's mounted properly above your license plate. The LEDS are nice because they make great replacements for incandescent lights, they last about 50 times longer. They're more efficient, they'll provide brighter light with less power output. Of course no bulbs to replace or no brittle filaments.

This one is a nice clear lens over a white LED, you can see it's in a nice black housing. It is a surface mount design to the trailer with the built in bracket here. It does mount above the license plate, and as you notice it does come with the two screws for installing it. It is two wire design, uses these mail bullets. Includes the power lead and the ground wire, and are both black wires so you can use either one for ground or power.This light is DOT, Department of Transportation compliant.

It is made in the USA, the voltage is 12 volts. A few dimensions on this, and then we're gonna hook this up and show you how the light is. Overall length, and the end is right at three inches. Total depth, one and 9/16ths inches deep. The two mounting holes center to center is two inches.

You can see the long screws will just go through the front just like that when you install it. So what we're gonna do now is I'm gonna hook up some 12 volt power to this light just to show you how bright it is. As I mentioned you can hook one ground or power to either connector. I'll go ahead and turn our power on, you can see the light comes on. We'll go ahead and turn off the overhead light.

You can see once this is mounted above your license plate it'll give you a nice lit up area over your license plate. That's a single LED. Turn back on our overhead lights, disconnect it.That should do it for the review on the Peterson Great White Top Mount, LED Trailer License Plate Light.

Ratings & Reviews

4.7

118 reviews
5 Stars
(100)
4 Stars
(11)
3 Stars
(2)
2 Stars
(1)
1 Star
(4)
Review Sort Icon
by:
The license plate lights work as designed, but in a different function.
by:
It's sufficiently bright, but does not protrude far enough to shine on my door-mounted license plate. I resolved that by purchasing TWO of them. They're inexpensive enough to experiment. I stacked two mounting pieces to increase the protrusion to clear my door and license plate frame. I think I worked well. See my photo for details.
by:
Good light from a single led
by:
One year follow up! Works great. Nice white light. Perfect brightness. Used on a custom tag bracket for a Jeep. Cant seem to get the photo to upload. Would buy again in a second.
by:
Got what we needed for a much better price than the bed manufacturer wants. Thanks
by:
Worked lime its supposed to, but it could use a second or third led, it's a little on the dark side.
by:
by:
by:
by:
by:
2014 Open Range Residential Fifth Wheel
by:
by:
by:
by:
by:
by:
The only reason this plastic bracket is strong enough is because I 1/4-20 stainless bolted the license plate through the door sheetmetal at all 4 holes, with a nice solid stainless steel license plate frame over the plate. See the picture.

So the bracket is screwed to the door panel with the 2 screws, then pinned through the captive upper license plate bolts as well. I would not use this bracket hanging in free air or without more bolts through the body where the license plate attaches; it's not strong enough.

This thing could use a few more lumens as well.

But it won't be rusting...
by:
Great service and fast shipment, thank you!
by:
Thanks exactly what we needed
by:
They are great additions.
by:
Works as described
by:
Fast shipping, great quality, excellent service
by:
This was a great replacement for the original lic plate light. I did have to drill one new hole because the new light base was a tad wider than the original base. The wiring was very simple: hot and ground and it worked like a champ.
by:
The light itself is great! It would work better if there was a deeper recess on the bottom where it mounts to the trailer. This would help conceal the wiring and extend the light toward the rear of the trailer to better illuminate the license plate.
by:
Well built, easy installation. Great people to do biz with
Robert profile picture

Robert

10/23/2022

Great product. Have had zero problems with the well made trailer light, threw rain, snow, and extremely hot west Texas summer. Worth every penny.

25
118
true
Show More Reviews

See what our Experts say about this Peterson Trailer Lights

  • Do You Carry A Lighted License Plate Bracket For a Motorcycle License Plate On a Enclosed Trailer?
    While we do not have an exact part we do have all the parts that will allow you to mount your smaller license plate to your enclosed cargo trailer. First the Trailer License Plate Mount Bracket # LP10SB will give you an attachment point for the license plate and light. This is made of a rustproof black polymer that will last. A Peterson Great White LED Trailer License Plate Light # M290C-BT2 will attach to the top of the bracket to light up the license plate. You will need to provide...
    view full answer...

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda K
Updated by:
Amanda K
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee Kevin C
Test Fit:
Kevin C
Employee Thomas T
Video by:
Thomas T

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.