Permanent shelves and boxes can eat up cargo space when your setup changes. This E-track connector plate set bolts through plywood, shelving, or wood boxes, then uses a spring-loaded lever for quick attachment, removal, and repositioning.
Bolting shelves, plywood, or wood boxes permanently in place can limit how you arrange your cargo area. This connector plate set attaches an E-track connection to your wood piece, and the spring-loaded lever quickly connects or disconnects it from Snap-Loc or standard E-track. Your mounted piece can come off the track when you need the space or move to another available attachment point.
The lever plate and facing plate mount on opposite sides of your material and bolt together through drilled holes, giving your wood piece a secured attachment point. Square mounting holes secure the hardware when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately), while the mounting holes accommodate 1/4" hardware. Once installed, your piece has a 333-lb safe working load limit at the connector plate.
Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steven here with etrailer. Today, we're taking a look at a SNAP-LOC E-Track connector plate set. So folks, if you are bolting shelves, plywood, or wood boxes permanently in place inside of your cargo area, enclosed trailers, those kind of things, it's kind of limiting where you can do stuff and what you can do, right So if you have E-Track, or if you buy E-Track separately, this plate connector set will allow you to attach E-Track connections onto your plywood boxes or wood boxes, metal boxes potentially even. And it's gonna be a quick moving option from one place to another. So maybe you want to have them mounted for one item or one reason, and then, you want to be able to move it later on, this gives you that option. So again, your wood would go in here.
You bolt those together, hardware is sold separately, or you can use your own hardware, and then now you have connection points on those boxes or containers, whatever you're doing, to move them along E-Track. So it's just a different idea, different way to move stuff easily. It comes in two pieces like you see here. This is all steel construction obviously. It has a zinc plating, so it should be resistant to corrosion for many, many years to come.
They're rated for about 333 pounds per set, and on here it even has etched in there, the working load limit is 1,000 pounds break strength. So again, the working load limit's 333 pounds. Obviously, if you pair this up with another one, because you'll be able to, you know, put a couple on one, it should be way more than enough to hold. I would think that at that point, the wood would probably give out before the metal, right So again, just another option for you. This is the SNAP-LOC E-Track connector plate set, again, for using shelves and boxes and moving them around and not just having to screw them directly into your wall permanently.
I'm Steven. Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.