See what our Experts say about this Optronics Trailer Lights

• Not Getting Turn Signal Function When Using LED Bulbs On A Trailer
  LED bulbs have little resistance on their own, so when used with turn signals they can create a hyper flash situation, which is a fast flashing of the bulb. To determine if you will need a load-resistor kit like a LED Light Bulb Load-Resistor Kit # DI34ZR, you will install the bulbs and when the turn signals are activated, if the bulbs hyper flash you will need to install the load-resistor kit. This kit will prevent the turn signals from hyper flashing. You will need one kit for each LED...
  view full answer...
• Availability of 24V Side Marker Light
  Hey Joe; we don't have anything that matches the size and shape of the # MCL36RB in 24V. We do have the Optronics LED Trailer Clearance or Side Marker Light # MCL66R24B which is designed for 12V/24V systems you could use. Options are pretty limited for 24V since 12V is the standard.
  view full answer...
• How Do I Convert My Incandescent Trailer Lights to LED Lights
  Yes, you just have to remove the old lights, match the wires and mount the new ones. Please note, that it is usually not a good idea to mix LEDs and incandescent lights, so if you have have side markers or other lights on the trailer, make sure you switch those to LEDs as well. Incandescent lights draw much more amperage than LEDs do, and if they pull that current through the LED fixtures, the LEDs could burn up. We have LED side markers and clearance lights like part # MCL36AB and part...
  view full answer...
• Replacement Trailer Taillights for Peterson PM147
  The closest light we have to the Peterson PM147 you referenced is the Square LED Trailer Clearance, Side Marker Light with Reflector, Stud Mount, 6 Diode - Red # MCL36RB or the Wesbar Clearance Light-LED-Red with Reflex Lens and White Base # 47-222014. If you want a submersible light, I recommend the Thinline Trailer Clearance or Side Marker Light - LED - Submersible - 3 Diodes - Red # MCL67RB or the Peterson Piranha LED Trailer Clearance Light, 2 Diode - Red # 169R.
  view full answer...
• Amber Trailer Lights Similar to MCL-71RB
  The closest thing we have to the # MCL71RB you referenced in amber would be the Optronics # MCL36AB, which is also available in red as part # MCL36RB. The lamps are a bit smaller than the # MCL71RB at 2-7/8 by 2-1/8 inches. Optronics doesn't offer that lamp in amber as an LED version.
  view full answer...
• Will Non-Submersible Clearance Lights Work on a Boat Trailer?
  The Square LED Trailer Clearance Light, # MCL36RB, is non-submersible, so if it gets submerged in water, the possible damage includes short circuits, cracked lenses and burned out bulbs. This light is not sealed, and does not have a drain hole which lets water out if it does get in, like some submersible lights do.
  view full answer...
• Recommended LED Boat Trailer Light For Center Rear Marker
  The closest light we have to the Peterson PM147 you referenced is the Square LED Trailer Clearance, Side Marker Light with Reflector, Stud Mount, 6 Diode - Red # MCL36RB or the Wesbar Clearance Light-LED-Red with Reflex Lens and White Base # 47-222014. If you want a submersible light, I recommend the Thinline Trailer Clearance or Side Marker Light - LED - Submersible - 3 Diodes - Red # MCL67RB or the Peterson Piranha LED Trailer Clearance Light, 2 Diode - Red # 169R
  view full answer...
• Do I Need to Do Anything Special to Convert 1979 Skylark Camper to LED Exterior Lights
  There won't be any conversion needed to go from incandescent lights to LED lights on your camper. You'll simply connect the power wires and connect the light's ground wire and you'll be good to go; you could use something like the Optronics LED Trailer Clearance or Side Marker Light w/ Reflector - 6 Diodes - Square - Red Lens # MCL36RB to replace your old red clearance lights. As long as you're replacing all of the lights on your camper with LED lights you shouldn't experience any issues...
  view full answer...
• Are Mounting Brackets Available for Optronics Mini LED Clearance Lights # MCL95AB and # MCL95RB
  The Optronics Mini Rectangular LED Clearance Lights, # MCL95AB and # MCL95RB, are single stud surface mount lights, so they do not have a grommet or mounting bracket available. They were designed to mount directly to an existing bracket or to the trailer frame. The closest clearance lights that we carry to the dimensions of your current lights are the Optronics Square LED Clearance Light, # MCL36AB and # MCL36RB. These are also single stud surface mount lights, but the larger size should...
  view full answer...
• Availability of Optronics LED Trailer Clearance Lamp # MCL71RB in Amber
  The closest thing we have to the # MCL71RB in amber would be the Optronics # MCL36AB, which is also available in red as part # MCL36RB. The lamps are a bit smaller than the # MCL71RB at 2-7/8 by 2-1/8 inches. Optronics doesn't offer that lamp in amber as an LED version.
  view full answer...
• Replacement Lens Recommendation for the Square LED Trailer Clearance, Side Marker Light # MCL36RB
  Yes, the correct replacement lens for the Square LED Trailer Clearance, Side Marker Light # MCL36RB that you referenced is the part # A36RB. I pulled the two products from our warehouse to confirm this.
  view full answer...
• Replacement Red Lens for MC36RB Trailer Light Part # A36RB
  The correct replacement lens for the Square LED Trailer Clearance, Side Marker Light with Reflector, Stud Mount, 6 Diode part # MCL36RB is the Replacement Red Lens for MC36RB Trailer Lights part # A36RB.
  view full answer...
• Recommended Red Square LED Trailer Clearance Light
  For your boat trailer, you will just need the Optronics LED Trailer Clearance, SIde Marker Light with Reflector - Red # MCL36RB. This is the exact size and design as the Amber # MCL36AB that you referenced and will mount using the included 5/8 inch stud. This is a very nice, square LED clearance light that measures 2-7/8 inches long, 2-1/8 inches wide and 15/16 inches deep. I have attached a short video demonstration on this product that you can also check out.
  view full answer...
• LED Clearance Light With Black Base Recommendation
  The trailer light with a black base we offer that is closest to the size of the # 47-222014, which measures 2-5/8 x 1-7/8 x 13/16, is the Optronics Square LED Trailer Clearance, Side Marker Light with Reflector, part # MCL36RB. The dimensions for this light are 2-7/8 x 2-1/8 x 15/16.
  view full answer...

Do you have a question about this Trailer Light?