bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Clearance Lights
  4. Rectangle
  5. LED Light
  6. Amber
Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers - 3 Diodes - Amber

Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers - 3 Diodes - Amber

Item # MCL35AEBP
Retail:$20.11
Our Price: $9.94
You Save: 51%
Trailer Lights
Shipping Weight: 0.1 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
3-3/4" x 2-1/16". LED trailer light serves as a side marker or clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. Single wire design grounds through hardware. PC rated. Great Prices for the best trailer lights from Optronics. Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers - 3 Diodes - Amber part number MCL35AEBP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (71)
  • Q & A (0)
  • Videos (1)
  • Photos

Optronics Trailer Lights - MCL35AEBP

  • Clearance Lights
  • Rectangle
  • LED Light
  • Amber
  • 3-3/4L x 2-1/16W Inch
  • Surface Mount
  • Rear Clearance
  • Optronics

3-3/4" x 2-1/16". LED trailer light serves as a side marker or clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. Single wire design grounds through hardware. PC rated.


Features:

  • Rectangular LED trailer light serves as a side marker or clearance light when properly mounted
  • Built-in reflex reflector eliminates the need for a separate reflector
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Amber lens over white LEDs
  • Durable polycarbonate housing and lens
  • Surface mount - hardware not included
  • Single wire design grounds through mounting hardware
  • PC rated


Specs:

  • Dimensions: 3-3/4" long x 2-1/16" tall x 15/16" thick
  • Distance between mounting holes (center on center): 3-1/4"
  • Diodes: 3
  • Power draw at 12.8V: 0.07 amps
  • LIfetime warranty on LEDs


Optronics MCL35AEB Marker Clearance Light with Reflex Diagram

PC-Rated Lights

Diagram of light spread for PC rated light

A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.



MCL35AEB Optronics LED Side Marker or Clearance Light w/ Reflector for Carry On Trailers - 3 Diodes - Amber Lens

Replaces MCL35AEBP




California residents: click here


Video of Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers - 3 Diodes - Amber

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL35AEBP Review

Speaker 1: Today we're taking a look at the Optronics LED side marker or clearance light. This rectangular LED trailer light serves as a side marker or clearance light when properly mounted. It has the built in reflex reflector, which eliminates the need for a separate reflector. And it is an LED system. LEDs make great replacements for incandescent lights, they last longer, they burn brighter, they're much more efficient. With LEDs you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments.This unit features the durable polycarbonate housing and lens.

It's a surface mount installation, mounting hardware not included. Surface mount means that it mounts directly to the surface of your trailer, so there's no hole to cut out or grommet needed for the installation.It's a single wire design. This is your power wire right here, and then the unit grounds through mounting hardware on this location right here. You can see it has that metal ring around it That's the ground ring.This is a PC rated unit. It is SAE and Department of Transportation compliant.We're going to go over some measurements and then we'll hook up to power.

Edge to edge in this direction, is three and 3/4 inches. Edge to edge going this direction is about two and 1/16th, right in that area. Overall thickness, that's front to back, is about 15/16ths of an inch. And then the mount holes on the unit are separated on center by three and 1/4 inches.We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. We'll also turn off our overhead lights.

So I'm going to connect the power wire here and then I'll connect to my ground right here.So you can see there that it sends out a really nice consistent signal. It is a multi-diode design, so that means it contains more than one LED. So the multi-diode design really helps optimize the overall light output. The power draw at 12.8 volts is 0.07 amps, and Optronics puts a lifetime warranty on their LEDs.And that's going to do it for today's look at the Optronics LED side marker or clearance light.

Customer Satisfaction Score:


Customer Reviews

Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers - 3 Diodes - Amber - MCL35AEBP

Average Customer Rating:  4.9 out of 5 stars   (71 Customer Reviews)

3-3/4" x 2-1/16". LED trailer light serves as a side marker or clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. Single wire design grounds through hardware. PC rated.
0
0

See what our Experts say about this Optronics Trailer Lights

  • Is Optronics LED Side Marker or Clearance Light # MCL35AEBP Sold Individually
    The Optronics LED Side Marker or Clearance Light # MCL35AEBP that you referenced is sold individually. If you needed two of these you'd have to order a quantity of two.
    view full answer...
  • Is There A Replacement Lens Available For The Optronics LED Side Marker/Clearance Light MCL35AEBP?
    I reached out to my contact at Optronics and she mentioned that the Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers # MCL35AEBP you were looking at does not have a replacement lens due to the LED being part of the lens. Your only option would be going ahead and getting the complete replacement light # MCL35AEBP. I included a video of the # MCL35AEBP for you to take a look at.
    view full answer...
  • Do you Carry a LED Side Marker Light Like Part Number MC35AEB
    Yes we do have the LED counterpart. The Optronics LED Side Marker or Clearance Light w/ Reflector for Carry-On Trailers part # MCL35AEBP is the LED equivalent to the Clearance or Side Marker Trailer Light w/ Reflex Reflector part # MC35AEB.
    view full answer...
  • How to Wire Optronics STL2RB Tailllight on Carry On Trailer
    I don't have any available database that would tell me if the # STL2RB would be the exact replacement taillight for your trailer. The trailer manufacturers don't do as good of a job keeping track of that as the vehicle manufacturers do. This being said, the # STL2RB is extremely common, and if the dimensions of your existing taillight match those in the diagram I provided, there's every reason to believe that it's the correct replacement. The Optronics # STL2RB has three wire leads exiting...
    view full answer...
    Image 1 for
  • How To Replace Single Wire Porch Light with LED
    In cases where there is only one wire run to a light, this is because the light grounds via the mounting surface and the sole wire is for power. If you are replacing this light with one that uses two wires you'd simply need to run the ground wire to a suitable ground source. If you want to upgrade to LED then you can either replace the bulb or the entire fixture. I would need to know the bulb type for the former but for the latter you can choose an option from the list below that best...
    view full answer...

Do you have a question about this Trailer Light?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.