Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you want to make sure your trailer or project is clearly seen in low light, this Red Conspicuity Reflector does the job. It measures 12" long and 1" wide, giving you plenty of reflective surface area to catch headlights and signal your presence. The bright red finish stands out well after dark, improving safety whenever you’re on the move or parked along the roadside.
No complicated install here. The reflector includes strong adhesive backing for quick placement—just peel and stick where you need visibility. For a more secure hold, especially on rigid surfaces, it also includes two mounting holes spaced 7-7/8" center-to-center. That means you can fasten it down with screws or bolts for a setup that won’t shift or peel away over time.
You don’t have to guess if it meets safety standards—this reflector is both DOT and NHTSA compliant. That ensures it provides the right level of brightness and reflectivity required for conspicuity applications. Whether you’re adding it to a trailer, flatbed, or utility rig, it meets the same standards used across highway-approved lighting gear.
At just 1" tall, this slim rectangular reflector sits flush against the surface and doesn’t stick out awkwardly. The simple red design fits right in with most lighting setups and looks clean wherever it’s mounted. It’s an easy way to improve visibility without adding bulk or drawing unnecessary attention during the day.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this red reflector. This reflector is going to measure 12 inches in length there and then our width, we're looking at just over one inch, we'll call it one and one 16th of an inch. As far as our thickness goes, we're looking at approximately quarter of an inch. This does come with a couple different ways to mount it so we've got the included adhesive backing, double-sided backing there so we can simply install that there and then stick this wherever we want it to go or we do have these two screw holes here. These screw holes are approximately three sixteenths of an inch in diameter and then they are spaced about seven and seven eighths of an inch apart.
So it will be very simple to get this mounted whichever way you choose to with either the adhesive or with some hardware. The hardware is not included to get these mounted in place, but it should be pretty simple to get it put wherever you need it. So, that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
.
Ratings & Reviews
The fit of the screw will be critical to keep from cracking it. They should supply those with the product.
Two 3/16" holes and an adhesive strip. What could be easier!
Arrived in timely manner and in good condition. No negatives to report....
Larry R.
3/9/2019
No problems - used on trailer above lights for added visability.
Awesome reflector. Going to order more because I like these so much!
Order was received in timely manner. All items ordered were in box delivered. No issues, good selection of products I was interested in.
Great product...great price ...great service and fast delivery
You cant ask for more !!!!
This is my go -to site
Paul
8/27/2022
Still working fine ..no issues
Reflectors have held up well.
Exactly what I needed. Very fast shipp ing!
GREAT CUSTOMER SERVICE AND FAST SHIPPING
great quality, I've used these reflectors in the past and they shine brightly and last for years.
very fast shipping will do business with y'all again
Excellent serves from E-Trailer! and the product was just as described.
Reasonable price of product and shipping very reasonable and received quickly.
Very satisfied both with the product ordered and the service received.
great price for marker lights on my sons 28 ft enclosed trailer
The trailer lights were shipped and delivered in a reasonable time and the price paid was very good. I appreciate the timely communications that kept me updated on the status of the order.
Order item at 10 pm on a Sunday night shipping notice created at 10:39 pm the same night. Item received Wednesday just in time for my trip later that evening. Excellent service and product is A+++. etrailer has never disappointed me with their service or products. A+ company
Just received my item. The packaging it came in was outstanding !!!
I have installed them on the rear mud flaps on my 2015 F350 Dually superduty.
They look great on them. Wish the reflectors would have been a little longer to cover the whole mud flap, none the less they look great.
These worked great mounted on the boat guide posts I put on my trailer! Now there is a lot more for drivers behind me to see on my trailer at nite when I don't have the boat on it! VERY happy with these and so easy to install! -Scott-
The order that I received proved to be of excellent quality. I ordered a strip reflector and wire clips for my utility trailer. Online ordering service was quick and easy and I got my order within 3 days of my order placement. Great overall service and products and I will definitely order from etrailer in the future as well as recommend to my friends. Thanks for the follow-up emails regarding my order.
Ordered led lights to replace all the lighting on my triaxle trailer. Parts arrived sooner than expected and were a terrific upgrade. I had an issue with one taillight. The item was replaced at no charge, no hassle, no questions asked. Fantastic customer service.
Replacement for worn reflectors on class a mudflap. They have not broken or worn off reflectivity.
A great product that doesn't cost an arm and a leg! I put these on a hitch mounted cargo carrier. Performs better than expected. I would highly recommend these reflectors! ............... And the service from ETrailer is outstanding!
Charlie B.
8/17/2016
Great product, would definitely recommend these!
Excellent value! Worked perfect on the narrow lip on the rear of my car hauler trailer!
I have installed these Red Conspicuity Reflectors on the blacked-out bumper portion of my 2014 Toyota Corolla. The upper portion of the blacked-out bumper was too curved and the surface too rough to mount these reflectors. The reflectors adhesive sticks fairly well to this surface, but because the surface is slightly curved, it will be necessary to mount the reflectors with small black screws. I have not yet found the appropriate screws for this application. Otherwise I find these reflectors an attractive and functional addition to the automobile.
Works great as a reflector on my motorhome mud flaps.
Mike B.
1/6/2024
Great, no problems
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Sierra K.
12/15/2021
The mounting holes are 3 16th of an inch in diameter.