bing tracking image
  1. Trailer Lights
  2. Peterson
  3. Tail Lights
  4. Oval
  5. LED Light
  6. Red
Peterson Piranha LED Trailer Tail Light - Stop, Tail, Turn - 10 Diodes - Oval - Red Lens - 12V/24V

Peterson Piranha LED Trailer Tail Light - Stop, Tail, Turn - 10 Diodes - Oval - Red Lens - 12V/24V

Item # M423R-4
Our Price: $27.36
Trailer Lights
Shipping Weight: 0.36 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
6-1/2" x 2-1/4" Oval. LED trailer tail light functions as a stop, tail, and turn signal light. Pirhana series combines modern design with vibrant lighting. Mounts on surface of trailer - hardware not included. 3-Wire pigtail. Great Prices for the best trailer lights from Peterson. Peterson Piranha LED Trailer Tail Light - Stop, Tail, Turn - 10 Diodes - Oval - Red Lens - 12V/24V part number M423R-4 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (250)
  • Q & A (0)
  • Videos (2)
  • Photos

Peterson Trailer Lights - M423R-4

  • Tail Lights
  • Oval
  • LED Light
  • Red
  • 7-1/2L x 3-1/4W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Peterson

6-1/2" x 2-1/4" Oval. LED trailer tail light functions as a stop, tail, and turn signal light. Pirhana series combines modern design with vibrant lighting. Mounts on surface of trailer - hardware not included. 3-Wire pigtail.


Features:

  • Oval trailer light serves 3 functions on trailers less than 80" wide
    • Stop light
    • Tail light
    • Turn signal light
  • Piranha series combines modern design with vibrant lighting for a unique look
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens over white LEDs
  • Compatible with 12V and 24V DC systems
  • Mounts on surface of trailer - hardware not included
    • Mounts in any 360-degree position
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Red wire for turn signal
  • DOT compliant
    • Meets FMVSS 108 requirements for automotive lighting


Specs:

  • Overall dimensions: 7-1/2" long x 3-1/4" tall x 7/8" deep
    • Lens dimensions: 6-5/16" long x 2-1/4" tall x 7/8" deep
  • Distance between mounting holes (center on center): 7"
  • Diodes: 10
  • Input voltage: 9V - 32V DC
  • LED limited lifetime warranty


Surface-Mount Light

Surface Mount Trailer Light Installation Diagram

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



423R-4 Peterson Piranha LED Trailer Tail Light - Stop, Tail, Turn - 10 Diodes - Oval - Surface Mount - Red Lens - 12V/24V




California residents: click here


Video of Peterson Piranha LED Trailer Tail Light - Stop, Tail, Turn - 10 Diodes - Oval - Red Lens - 12V/24V

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Peterson Piranha LED Trailer Tail Light Review and Installation

What's up, everybody It's AJ, with etrailer.com. Today we're gonna be checking out this Peterson Piranha Trailer Tail Light. Now it's gonna come in two variations, we're gonna have a chrome bezel around one of them, and the other one is just gonna be black around the outside. Either way, whichever one you go with, it's gonna be LED, it's gonna look really nice on your trailer, especially if you're replacing those old incandescents that heat up and wear out pretty easily, this one you're not gonna worry about replacing for a while, let's check it out. You're gonna have 10 LEDs in total, and they're gonna be white with the red polycarbonate cover over it, that's what's giving it that red shade. They're pretty bright, this is in the middle of the day, you can still see it just fine, so it's gonna be even brighter at night.

As far as size go, it's gonna be seven and a half inches, and that's from the top of the bezel to the bottom of the bezel, and three and a quarter inches wide. So just keep that in mind, where you're gonna put it on your trailer, make sure you got enough space like we do here just to put it in the proper spot. As far as install is gonna go, it's pretty simple, it's a three wire install. So if you're replacing one of your lights, it's most likely gonna have the exact same wires in there, you're just gonna cut those and hook it back up, check out how we did it. Went ahead and removed the old light, it was looking kinda nasty, so we wanted to get it off of there.

Now we're gonna come back and strip the wires, get this ready to add our new light. So I just got a wire stripper here, gonna go at each one of them, and just pull that wire back. Just like that, on each one of them. We got our replacement light here, you see it's listed, what each function of the wires do, so that's good to pay attention to, you gotta hook up on the trailer side. If you're unsure of your trailer wires, if they're different colors, you can always go through and test it to make sure you get the right ones.

But according to our new light, the white wire is gonna be ground, and we're gonna snip off the end here, 'cause we're just gonna attach it right to this ground, it's grounded inside. The black one is gonna be the tail lights, so we'll match that up with a black one on here, and then the red one is gonna be the stop and turn, so that's gonna go to the red one on here. So I got heat shrink butt connectors to use, and that's how we're gonna make our connections. Just gonna go through and attach each one and come back and seal it up, but first we gotta cut off that ground so that it matches up with this one. I got my cutters, just come back, cut that off.

Now I'll get the wire strippers and get that exposed, and then we can make our connections. Back on the trailer side, I went ahead and twisted the exposed wire just so it gets a little thinner and easier it's to put into the butt connector. I'm gonna go ahead and crimp these sides first, that way it's good to go when I get that light. So I just come back, insert that in there, put this in the groove, and I'm crimping down, just like that. Now I got my light, we're gonna go ahead and make those connections on that side. Same thing as we did before, we're gonna make all three of those connections. I went ahead and heat shrinked those butt connectors around those connections that way they're nice and sealed, tuck them back in there, and now we remount our light, so looks like it lines up just fine with all the pre-existing holes so we can just use those to install in the light. Now we're gonna use the existing hardware that was on our old light. If you don't have existing hardware, you're gonna have to get your own that fits in there just make sure you get the appropriate kind that will seal it up to your trailer. We got that one, and then we're gonna do the same process for all the other ones here. Now this light comes in two different ways, you can get it without the chrome border, so then at this point, you'd be done. you wanna test your lights. But if you go to the chrome border, you just put that on now, it snaps into place, that easy. Now I'm upfront, we're going to go ahead and test the lights out, we're gonna fire it up. Looks like our brake lights are working just fine, we're gonna do our left turn. Looks like it's working just fine, and then just straight up tail lights, looks like all the connections are good. Overall, I think it's gonna look nice on your trailer, whatever it's scheme is, if you've got that nice chrome, I liked the way it pops out on our trailer here. Even without it, it looks nice, and it doesn't stick out too far. The LEDs are always a good replacement for old incandescent lights, so definitely an upgrade. They're gonna lasts way longer and you won't have to replace these again for a long time. Well, I think that does it, thanks for hanging out, and I hope this helped..


Customer Reviews

Peterson Piranha LED Trailer Tail Light - Stop, Tail, Turn - 10 Diodes - Oval - Red Lens - 12V/24V - M423R-4

Average Customer Rating:  4.8 out of 5 stars   (249 Customer Reviews)

6-1/2" x 2-1/4" Oval. LED trailer tail light functions as a stop, tail, and turn signal light. Pirhana series combines modern design with vibrant lighting. Mounts on surface of trailer - hardware not included. 3-Wire pigtail.

by:

Perfect for the job. Easy install, bright light, everything you need.



by:

Excellent service, unfortunately I ordered the wrong base and correct lights.



by:

Direct replacement for OEM unit on my trailer. Easy to install.



by:

Nice light, easy to install nice and br ight



by:

Killer lights, Killer price, no problem s.



by:

Fast shipping, great product. Thanks et railer!



by:

Exactly what I needed. Delivery was super fast and that was important to me on this order.



by:

Good quality lights.



by:



by:

Not sure its anyones fault but the LED marker lights on my trailer fasten to the wall with screws and today that style is not made as it was in 2017...So i am rating the lights "average" cause till i open the light up without busting it I got to make it work and your lights are just the same as the rest...lights look fine and i will let you know how it works out...



by:

Easy to install and fit holes from previous installation.



by:

These are far better than the bland factory lights and are sealed very well.



by:

Order 2 of theses paid extra for shipping , and they don't match each other dame part number , tried to return them wad going to cost me more thank just keeping the wrong parts does not match pictures on website



by:

Just starting using you guys and the service, website and deliveries have been great. Keep up the great work.



by:

The lights worked great for our Timpte hopper trailer.



by:

The parts was the right size and on time thanks!



by:

Exact replacement for my trailer. The factory incandescent bulbs had faded and connections were failing. With a quick inspection with a multi meter I found that all the lamp bases checked out.
I installed this Amber and Red marker lamps through out the whole trailer. I now “glow” going down the road at night. I highly recommend these replacement lamps.



by:

Better than the ones that came with the trailer.



by:

The 168R side marker light paired with the B168-18 mounting gasket were easy to mount and work perfectly.



by:

Your products have never failed me…Been doing business for years….However, beyond your control, usps shipping is ridiculous….10 days from ordering to delivery…glad I wasn’t in a hurry!



by:

I think etrailer should have sent plugs with lights!



by:

Excellent service as usual. Always great service and great products.



by:

I was looking for a certain size to fit the existing cutouts on my trailer and I was able to find the one I needed because you guys listed the size. Great idea.



by:

Always seem to have the lighting products I am looking for.



by:

It’s perfect as I ordered it , arrived very fast and as advertised, awesome lights will buy again.


25
230
Show More Reviews

See what our Experts say about this Peterson Trailer Lights

  • Oval LED Trailer Tail Light That Works With 24 Volt System
    We do have an oval LED tail light that works with 24 volt systems, but the parts you mentioned are only designed to work with 12 volt systems. So if you have a 24 volt system you would need the Peterson light that you referenced, which is the Peterson Piranha LED Trailer Tail Light # M423R-4. This is a surface-mounted light that comes with a flange and measures 7-1/2" long x 3-1/4" tall x 7/8" deep overall. I have added a link below to a video review for you to check out as well if you'd...
    view full answer...

Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Jacob T
Video Edited:
Jacob T
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924