Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3-1/2" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Optronics # RE06RB
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everybody. Ryan here at etrailer. Today we're gonna be checking out the Peterson Stick-On Trailer Reflector. Adding a stick on reflector like this is a great way to get some extra visibility from other motorists, you know, without having to run a light. 'Cause sometimes, you know, you just can't mount a light where you want to, or you don't really feel like having to route the wires and go through all that trouble. So, this is a quick and easy solution for you.
So, this one's red in color. You want red to be on the back of the trailer. It's like kind of how we have it set up here. And if you're gonna be doing the sides or the front, you'd want to use an amber colored one, which these are also available. And one of the things that kind of separates these from some of the others is the chrome trim ring.
Some people like it, some people don't. I feel like it would just depend on the style of your trailer that you're putting this on. But you know, if you wanna go for a little extra pop and it matches the rest of your setup, it's a good option for you. Being at these stick on a two-sided tape, you can pretty much mount them anywhere. When you do go to Mount them though, make sure the surface you're putting them on is clean and dry.
So I like to use rubbing alcohol, wipe it down and stick it on. Really, you're only gonna be limited to the size, right Where, if you've got enough for them to put it. So, the size of the reflector is gonna be three and a half inches long, and an inch and three quarters wide. So, relatively compact. And just to kind of compare this one to some of the other ones, here's an Optronics reflector.
I kinda like these. They feel a little bit thicker. They have a black trim ring around it, so just wanted to give you another option there if you think that'll match your trailer better, or whatever the case may be. Other than that, though, you know, not a whole lot to it. It feels well built. It's gonna be a quick and easy way to make your trailer a little more visible. But with that said, I think that'll about do it for our look at of the Peterson Stick-On Trailer Reflector.
Average Customer Rating: 4.8 out of 5 stars (70 Customer Reviews)
3-1/2" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.Same as with the amber reflectors. This make and model has provided superior performance over the years. the price was fair and delivery fast.
Willis
8/23/2024
After a year in they are working great on our trailers as well as our emergency response vehicles. Not a single issue. As other makes fail over time, were replacing them with these Peterson reflectors.
Over several years I have purchased several items from etrailer. Price, quality, and service has always been consistently good. I rate etrailer as a 5 star vendor, and the first place I go for trailer parts. Jeffrey A. Young Barnstead, N. H.
Look good and easy to apply.
Neal W.
8/1/2017
The reflectors look like new and are adhered well to the trailer.
I restore vintage snowmobiles as a hobby and this reflector was a perfect replacement for the original that was no longer available so thanks etrailer its worked out great for my needs.
Jeff,
Super fast shipping service, great quality product at an amazing price.
Thank you.
See prior remarks. thank you
One year later the trailer lights are still working like new.
The quality of this reflector is okay, but the size stated in the description is off. It will probably be too large for where I intend to place it. It is supposed to be 3" X 1-1/2" but it is close to 3-1/2" X 1-3/4". It looks like the picture, so I wouldn't think I was sent the wrong part.
Sierra K.
7/20/2022
Thank you for your help. We have updated the measurements. I will have customer service contact you about a return.
I BACKED MY TRUCK INTO A BRANCH AND THE REPAIR TO MY TRUCK TAIL GATE WOULD HAVE COST OVER 2 HUNDRED DOLLARS BUT / 2 OF THE STICK ON REFLECTORS ON THE GATE LOOK GREAT AND ONE OF THEM IS HIDING A SMALL DENT IM LOVEN IT
I purchased this reflector as a direct replacement for the OEM reflector on my 1999 Roadrunner boat trailer. The original was smashed when I backed the trailer too close to a fence. As the original was 16 years old and never stopped reflecting, I'd say the lifespan of this item is pretty indefinite, ending only by my own hand. It's comforting to know I can find the original part I need from eTrailer when I cause them to destruct, or they wear out. Thanks, eTrailer!
The reflectors worked great. I had the trailer powder-coated and had to strip of everything. The new reflectors were a good match and attached easily.
This is the exact lights that I needed and work just great. Fast shipping very happy with your products.
Tom M.
12/8/2017
Just as good as the first day. Great
Easy installation and slightly larger than the original reflectors on my trailer.
I stuck these on the "leather" saddle bags of my motorcycle 1 year ago and they have stayed on and held up very well. Still look good and work great! Will buy more again.
good quality,,, as described. Just put it on my boat trailer a few days ago. Good reflective qualities.
These are easy to use with a peel and stick backing. They look nice and the chrome trim makes them look a bit retro and fit in well on my 1970s trailer. I don't have any long term experience, but these seem reasonable quality.
These lights are used on our Fire Apparatus. They were hard to find. Etrailer had them at an economical price and shipped them to us quick.
Found everything i was looking for, easy ordering, prompt shipping, and quality products, enough said
I couldn't find this item anywhere online. I found it on a search at etrailer.com and had it within 2 days !!! Couldn't be happier. Thank you !!
These will work as replacement reflectors for my vintage Clenet Series 1 (#88)
Fantastic Price,and Item
Good quality and it worked great ,good replacement on my garden tractor
It was easy to determine this was the exact one I needed to replace a broken one on my trailer!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
6/14/2024
That was definitely an error on our part. We will contact you so that we can have the reflectors shipped out to you and have the keys returned.