Product Experts Available Now!
Call 1-800-940-8924
Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 15" Lift - 2,500 lbs
(138 reviews)
Price: $177.73
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 15" Lift - 2,500 lbs
Part Number: DL22320
In Stock
$177.73
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (138)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22320
Highlights
- 2,500-Lb Capacity: Handles heavy trailers with stable lift and lowering control.
- 28-1/2" Total Adjustment: 15" lift plus 13-1/2" drop leg bridges large height gaps fast.
- Rust-Proof Protection: TUFFPLATE zinc finish resists corrosion for 500 hours in salt spray.
- Footplate Stability: 7" x 4" plate spreads weight to prevent sinking in soft ground.
- Smooth Sidewind Crank: 8-1/2" handle clears obstructions for easy, pinch-free turning.
- Low-Effort Setup: Bolt-on bracket fits frames up to 3" x 5" and includes mounting hardware.
Features to know about
Faster Hookups: 28-1/2" Total Adjustment with 13-1/2" Drop Leg
Tired of stacking blocks or over-cranking just to get your trailer off the hitch? This Dutton-Lainson sidewind jack gives you a total adjustment of 28-1/2", combining 15" of lift with a 13-1/2" drop leg. Pull the pin, lower the leg, and you’re already most of the way there before you even start cranking. It’s rated for 2,500 lbs of lift capacity, so it handles heavy tongue weights without flexing or wobble, giving you a steady, confident lift every time.
Built to Last: TUFFPLATE Zinc Finish with 500-Hour Salt Spray Rating
Salt, moisture, and road grime take out most jacks long before their time, but not this one. The TUFFPLATE zinc finish adds three layers of protection—zinc, chromate, and a sealer—to resist corrosion for up to 500 hours in salt spray testing. That’s about 30% longer than a typical powder-coated finish. If your trailer ever sees saltwater or winter roads, this coating keeps the steel strong and the jack looking sharp season after season.
Steady on Any Surface: 7" x 4" Footplate for Solid Ground Contact
Soft ground or gravel can make a trailer shift or sink, but this jack’s rectangular footplate spreads the load evenly. The flat base keeps things steady when parked on dirt, asphalt, or grass. It’s much more stable than a caster wheel, especially for heavier loads, and perfect for setups where you want the trailer to stay put once you unhook.
Smooth, Easy Operation: Sidewind Handle and Grease Zerk Maintenance Port
The sidewind design lets you crank from a comfortable angle without skinning your knuckles on the frame. An 8-1/2" handle gives you plenty of leverage, while the internal gearing runs smoothly under load—no strain needed to lift a full trailer. The built-in grease zerk makes it simple to keep the gears lubricated without tearing the jack apart, so operation stays smooth year after year.
Easy Install: Bolt-On Mount Fits Up to 3" x 5" Frames
No welding required. The included mounting hardware bolts securely around trailer frames up to 3" wide and 5" tall. Multiple hole positions on the bracket make it simple to line up and tighten down. From small utility trailers to larger rigs with heavy gear, this sturdy design installs fast and stays solid through repeated use.
Specs
Application
- Trailer frame size: up to 3" wide x 5" tall
Weight and Capacity
- Lift capacity: 2,500 lbs
Bracket Height
- Retracted: 10-1/4"
- Extended: 25-1/4"
Lift
- Total adjustment: 28-1/2"
- Lift: 15"
- Drop leg adjustment: 13-1/2"
Dimensions
- Overall height (when retracted): 25-1/4"
- Footplate dimensions: 7" long x 4" wide
Warranty
- Limited warranty: 1-Year
22320 Dutton-Lainson Trailer Jack - Square Tube - Bolt On - Sidewind - 28-1/2" Travel - 2,500 lbs
Alternate Part Number: 7201
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Package not accepted
Ratings & Reviews
4.7
138 reviews
by:
Jeremie
05/20/2020
Very happy with my new trailer jack. This is a trailer my dad and I built in 1997. I use it to mainly haul seed for my job. It also gets used for recreation and other stuff. It had a jack with a wheel and was also too short, which meant I had to use a block and lots of wheel chocks. Should have done awhile ago, but never found a suitable jack in stores. I bolted to frame instead of using u-bolts using 6 grade 8 bolts.
by:
Chris
03/30/2023
This review is more for etrailer than the product. I highly recommend etrailer. They were very professional & kind. Product was received sooner than they said. All good things. I installed the trailer jack today and it seems like a good quality piece. It's easy to wind and with the drop leg, it extends high enough for the hitch on my truck. Thank you guys for the great service!
by:
Mike
05/31/2016
Excellent product - fast delivery. Loved how the video showed a person handling and measuring the product, but what I really wanted to see was what hardware was included and an install demonstration. Either way, the jack works great. I used two of them on my toy hauling pop-up to support the weight of my side-by-side and act as stabilizer jacks.
by:
Peter
09/12/2025
Sturdy but I do wish the welds to the mounting plate were the full length and not just several one inch welds. There also not robust thick welds. Time will tell if they hold up. I will be watching them for rust or cracks. Sprayed some T9 to try to prevent rust that would hide any cracks.
by:
Randy S.
01/28/2015
This is probably the best buy on the market today for a trailer jack! This jack arrived packed very well with all the hardware needed to install it. it installed on my car trailer in less than an hour in my driveway. It is very well built and thanks to Rose at the order desk I received excellent help in choosing the correct jack for my trailer. If you are buying from someone else, you probably won't get the same quality for your money. Thanks etrailer.com you have me as a lifetime customer.
by:
Mark S
08/14/2016
I have a short shaft on my trailer that could not utilize a conventional trailer jack. The drop leg jack is built well and does the job! I received the jack several days after I ordered it, which was great.
Mark S.
8/14/2017
Great! Well constructed. I have a short shaft on my home made trailer and could not use a conventional trailer jack. This was a great option and it has held up very good. Great product and worth the money!
by:
Randy
04/16/2012
jack this thing rocks.I have a 24 foot cabin cruiser and needed the heavy duty jack with the 23" of lift and this unit fits 100% very smooth and I like the fact that there is not a wheel on it way safer.The install is also way easy.I would highly recommend this for anything with in the 2500# rating .
Randy S.
1/27/2015
Drop leg jack was exactly like described, installed in less than an hour in my driveway. the order was shipped very fast and the jack is every thing you said it was, i am very happy with the jack and e-trailer.Thanks to Rose for the friendly help with my order!
by:
Russell
06/28/2019
The jack is solid and was very easy to install. It has a grease fitting for future lubrication when needed. The lift was as described in terms of height. All in all this is a very solid Jack which you will enjoy.
Russell
6/29/2020
The jack continues to perform flawlessly
by:
Jim
01/25/2017
Good heavy jack, easy bolt on mount. Nice leg extension to shorten the cranking to lift the trailer.
Jim
1/26/2018
Still the same. Its working great.
by:
Adam B
06/22/2017
I purchased this to replace a vintage (think rusty, sticky and generally obstinate) jack. The ordering process was easy, communication from the vendor was excellent and the shipping was fast. Installation took all of about 5 minutes after the rustyjackectomy was performed. The drop leg part of the jack has saved me from carrying around the vintage accessory that came with the jack, a cinderblock to put under the non-functioning wheel at the end of the rustystickobstinate jack. Freedom! There is a smallish foot on the new jack which provides adequate stability and resistance to sinking on soft ground, something that we have lots of here in the Pacific NW. Additionally, this new jack sports a zerk fitting which may help stave off the rustystickyobstinate syndrome that afflicted the original. All in all, this represents a significant improvement to my trailer jacking activities.
by:
Mike
03/16/2015
This jack was a replacement for a deteriorating jack on my v nose snowmobile trailer. The salt and weather were taking it's toll and the fixed jack was mounted somewhat too low so it occasionally would bottom out on transitions from the road to parking lots. This jack when mounted to my tongue is higher and the drop leg feature still lets me jack it high enought to remove from my truck. Hopefully the Nickel plating will give me a longer service life than the previous painted version that was on my trailer originally. I also like the fact that this jack has a grease fitting to be able to lubricate the internals. Nice jack so far.
by:
Alan M.
03/11/2020
The jack is great ! Heavy duty and very rugged. The only thing that may be improved is the mounting bar used on the back side of the trailer channel. It needs to be a bit "beefier". My bar bent slightly when I tightened the retaining bolts.
by:
Todd
01/12/2022
I purchased this jack a year ago for use on a 4 place snowmobile trailer that moves around the salty winter roads of the northeast. Great jack, no rust, powerful jack, smart purchase.
by:
John C
06/17/2013
Perfect answer to tipping up my boat trailer enough to get bilge to drain.
Used to have to use a cinder block + 2 pieces of wood, crank up the wheel jack (that came on the trailer), put wood under tongue, crank down wheel jack, put in cinder block on its side under wheel, crank up wheel jack, put 2nd (longer) piece of wood under tongue, crank down wheel jack, put cinder block under wheel on it's end (not the most stable arrangement), crank up wheel jack.... it really kinda sucked!!!
Now, I use the wheel jack (that came on the trailer) to detach from tow vehicle and crank it up all the way, Then on the Drop Leg Jack, pull & reposition the pin on drop leg so leg extends fully (2 seconds), and crank up the Drop Leg Jack all the way, done!
Used to have to use a cinder block + 2 pieces of wood, crank up the wheel jack (that came on the trailer), put wood under tongue, crank down wheel jack, put in cinder block on its side under wheel, crank up wheel jack, put 2nd (longer) piece of wood under tongue, crank down wheel jack, put cinder block under wheel on it's end (not the most stable arrangement), crank up wheel jack.... it really kinda sucked!!!
Now, I use the wheel jack (that came on the trailer) to detach from tow vehicle and crank it up all the way, Then on the Drop Leg Jack, pull & reposition the pin on drop leg so leg extends fully (2 seconds), and crank up the Drop Leg Jack all the way, done!
by:
Paul Z.
11/27/2016
Installed his Jack on a 27 foot deck over snowmobile trailer after going through a fold up styled wheeled Jack a year. After a year it's as sturdy as the day I installed the. Very happy.
by:
Pete S
03/22/2012
that come with all trailers are junk. They are good for two years before they just won't crank. Their limited adjustment required me to take bottle jacks and blocks of wood to hitch and un-hitch! I highly recommend this product because of it's huge adjustability range, and who needs a wheel on the jack of any boat that weighs more than 3000 lbs! , actually could be hazardous.
Get it , you won't regret it!
Get it , you won't regret it!
by:
James .M
03/28/2016
We put a pair of these on our aluminum trailer, to stabilize it when loading the utility tractor. They work great, you can lower the leg to the desired length and then just a couple cranks and the trailer is stable. Great product ,I would definitely recommend.
by:
Mark
05/18/2025
Excellent jack. Very smooth and consistent. Good upgrade for me.
by:
Paul
02/01/2018
Great service and delivered early with no damage and works great!!
by:
Dave E.
02/21/2017
The wheels and tongue jack I ordered for my boat trailer arrived quickly and well packaged. Thanks to the information on eTrailer pages on how to measure for wheels, the wheels fit the hub perfectly. The trailer jack is not yet installed, but appears to be of good quality. Now, just waiting on the water to warm up to launch the boat and take the grand daughter swimming and boating.
by:
James
12/22/2016
One of the best investments I've ever made. Looks & works perfect on my aluma cargo trailer. Had it installed in 15 minutes.
James
12/22/2017
Real nice ! 5 stars...
by:
Dan Johnson
03/31/2012
an email to etrailer.com. They got back to me, recommended a jack that would have the range of lift I needed based on my input. The jack was at my door two days after I ordered it. I installed the jack with the parts they sent in about 10 minutes. Works smoothly, has a nice finish, mounting has some range to it so it works for a lot of different applications, there is a grease fitting to make it easy to keep it in working condition. This will do exactly what I needed.
by:
Ronald
04/29/2016
Perfect service and products. Items are exactly as depicted. I am quite pleased. I needed a jack with at least 29 inches of lift as my driveway is sloped. I had originally ordered a tongue jack that was not available in the system. Customer service immediately notified me of this and they sent me a couple of similar items that were in stock and I chose from them. Thank you etrailer for excellent service!!
by:
Capt. Andrew
06/14/2015
using out boat trailer as much as we do and living in an area where we fish in the ocean and live close to the ocean, our "foot" on the bottom of our crank rusted completely off. So glad we ordered this on line and received it in a couple of days, this let us continue with our planned vacation. very easy to install. Thanks!!
by:
Thomas
09/29/2022
I ordered this trailer jack as direct replacement for my Coastline trailer. The jack has worked flawlessly over the last year since my purchase. Buy with confidence.
25
138
true
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Dutton Lainson Jack Recommendation to Replace One with 203960B LabelI spoke with my contact at Dutton-Lainson and he stated that the 203960B number that you pulled from your jack is a label number. That label was used on two different trailer jacks with a 1250 lb weight capacity, sidewind jack # 6814 and topwind jack # 6817. The closest sidewind jack we have would be the Dutton Lainson part # DL22320.
view full answer... - Are There Any American Made Trailer Tongue Jacks Available?We do indeed carry American made jacks. You will want to check out the Dutton-Lainson line. All of their jacks are made here except the Model 7201 # DL22320 and Model 3400 # DL22300. With that said, if you are specifically looking for an A-Frame jack, you will want to check out the Dutton-Lainson A-Frame Trailer Jack - Topwind - 5,000 lbs. # DL22772. This will have 14" of lift , but does not include a foot plate. If you prefer a foot plate, you will want the # DL22542, but if you wanted...
view full answer... - Replacement Parts for Dutton Lainson Trailer JackWe do offer both replacement parts and complete Dutton Lainson trailer jacks. All complete jacks can be view by clicking on the linked page. All Dutton Lainson jack replacement parts can be viewed by clicking on the other featured link. You can use the filters on the pages to select your type of jack and the type of replacement part you need, such as caster wheel # DL22414 that fits their a-frame jack # DL22530. I checked with Dutton Lainson for your part number 203960B but this was not...
view full answer... - Replacement Crank Handle for Atwood Trailer Jack to Provide Better Tailgate ClearanceSometimes a substitute part like a jack handle will fit on another brand of jack but we do not test items in this way since there are so many possible combinations. I did check the dimensions of an alternate handle, part # BD500171, and found that the shaft diameter on both is 3/8-inch. This handle does have a larger radius, 9-1/2-inches instead of 6-1/2 for the # AT25526. Odds are good it will fit the jack. But if you want the sure thing just replace the A-frame jack with a side-frame-mount...
view full answer... - Bolt On Trailer Tongue Jack Capable Of Fitting a 6" Tall FrameFor a 6" tall frame I recommend the ARK Xtreme Off-Road Swing-Up Trailer Jack # ORJW750BD as the Dutton-Lainson # DL22320 will only fit a trailer frame up to 5" tall. The ARK jack is rated for up to 1,650lbs capacity and fits trailer frames up to 6" tall and 2" wide. It uses dual wheels allowing you to position the trailer in tight areas.
view full answer... - Adjusting the Height of the Bolt-On, Drop Leg Trailer Jack, # DL22320 with Weight on the JackI spoke with my contact at Dutton-Lainson, the manufacturer of the Bolt-On, Drop Leg Trailer Jack, # DL22320, about its functions. The jack can be cranked when there is a load on it to raise and lower the trailer as needed. When the jack is off the ground, you can remove that bottom pin to lower or raise the foot in 3-1/2 inch increments, then replace the pin. This is used so you would not have to do as much cranking. The foot cannot be raised or lowered when the jack has weight applied.
view full answer... - Replacing Swivel Jack with Drop Leg Jack on Boat TrailerI have a solution for you, but we do not carry an adapter like you mentioned to mount a square tube jack to your existing winch stand. The best option for your set-up may be to use a jack like the Pro Series Square Jack with Footplate # PS1400850383. Then, using a sheet of metal drill the bolt holes to match the existing holes in your trailer. Another option is to try and find a drop leg jack that matches the mounting dimensions on your trailer. One option for a drop leg jack is the...
view full answer...
- Trailer Jack that Fits BigTex 70Ch-16 Car HaulerYes, the Dutton-Lainson Bolt-On # DL22320 does fit your frame dimensions of 4 inches tall and 1.5 inches wide. It also has a 2,500 lb capacity so it would work well in that regard as well. I attached a review video for this jack for you to check out as well.
view full answer... - What Capacity Jack is Needed at Minimum to Support 3,100 lb Boat and TrailerA trailer jack only needs to support the tongue weight, which for a boat trailer is something like 5 to maybe 10 percent of the weight of your loaded trailer, because so much of the weight is at the rear of the trailer. To be absolutely sure you will need to know your tongue weight by using a scale like the etrailer Tongue Weight Scale # e99044 but we can make a good guesstimate. With a 3,100 lb boat, since the trailers themselves are usually fairly light you can get away with a 2,500...
view full answer...
- Bolt Pattern Of Dutton-Lainson Bolt-On Trailer JackI went to the warehouse and took some measurements of the Dutton-Lainson Trailer Jack, part # DL22320. The mounting flange on the back of the jack has 6 holes. I have attached a photo of the jack and have noted the measurements you asked about. The flange measures 6-1/2 X 6-3/4 inches. It has 6 mounting holes. They are spaced 1 inch apart except the middle two holes on each side. Those are spaced 1-1/8 inches apart. From center of the outside hole to the center of the outside hole on...
view full answer...
- Easy To Use Side Mount Manual Crank Trailer JackWe have a variety of side mount trailer jacks, however, all of which are manual crank. The only electric jacks available are for a-frame trailers. Although we do not have an electric jack that attaches to the side of the trailer frame, we do however have several options with a drop leg feature that will eliminate the need for strenuous cranking. I recommend using the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack part # DL22320 as this has the drop leg feature that will minimize the amount...
view full answer... - Trailer Tongue Jack with 10 Inch Retracted Height Needed for a Lawn Vacuum TrailerThe bottom of the swivel mount will be 11-1/2 inches from the bottom of the wheel when the bracket is adjusted to its lowest height. Depending on the size and design of your Vacuum trailer frame this jack may work for you. Another jack that may work for you is the Bolt-On, Drop Leg Trailer Jack - Sidewind - 2,500 lbs. by Dutton-Lainson, item # DL22320. When in its lowest position the bottom of the foot to the mounting plate is about 3 inches and the holes in the bracket extend up from...
view full answer... - Trailer Jack with Best Ground Clearance and a Wheel for a Pop-up TrailerIf your trailer tongue weight is less than 750 pounds then I have the perfect solution for you. A Rack and gear jack, such as # BD162300, can get very low. When fully retracted it measures just 6 inches from where it mounts to the bottom of the wheel. This jack is designed to fit frames that are up to 4 inches square but no larger or can be welded directly to the trailer. We also have the similar # BD169201 for trailers 3"x5". If you can tell me your frame width and height and the tongue...
view full answer... - Bolt Pattern of Dutton-Lainson Drop Leg Jack Part # DL22320The bolt holes on the mounting plate of the Dutton-Lainson 2500 lb Drop Leg Trailer Jack, part # DL22320 measure 5-1/2 inches apart, measured center to center. Each of the top three holes is 1 inch apart from the row below it.
view full answer...
- Tongue Jacks With Enough Lift for a Trailer Height of 24 to The Bottom of TongueI am only going to list bolt on options for you but can go into weld on options to if you would also like those options. When you see a retracted height that refers to the height from the bottom of the footplate or wheel to the center of the mounting bracket. First is the Dutton-Lainson Bolt-On # DL22320. It has a retracted height of 10-1/4" and offers 28-1/2" of lift via a 13-1/2" drop leg and 15" of jack travel. This jack has a lift capacity of 2,00lbs and will need a lift clearance...
view full answer... - What is the Bolt Hole Size of the Dutton-Lainson Bolt-On Trailer Jack # DL22320The diameter of the bolt holes on the mounting bracket for the Dutton-Lainson Bolt-On Trailer Jack, # DL22320, is 7/16 of an inch. This jack includes the bolts and additional brackets needed to mount this jack on the trailer frame, so you will not need to provide your own hardware.
view full answer...
- Replacement Drop Leg for Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind - 2.5K DL22320It sounds like you are talking about the drop leg part of Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind - 2,500 lbs Item # DL22320. To replace the drop leg you can use Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K Item # TJD-5000-FT. I have linked a video review of this leg for you.
view full answer... - Recommended Jack for Triple Axle Load Fast TrailerIf you're looking for a side mount swivel jack we have some great options for this. Mind you, the weight capacity of the jack only needs to be rated for the tongue weight of the trailer which is usually no more than 10% of the gross weigh for boats trailers. I recommend the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack part # DL22320 which has a 2,500 lb capacity and offers up to a 28.5" lift.
view full answer... - Solution for Needing to Install 2,500 lb Trailer Jack on Trailer with 6 inch Tall FrameI really wish we had a bolt on solution but the tallest frame dimension we have a bolt on solution for is 5-1/2 inches like the Dutton Lainson part # DL22320. Only solution would be to weld the jack to the trailer.
view full answer... - What is the Maximum Height of the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind # DL22320I went to the warehouse and extended the Dutton-Lainson Bolt-On, Drop Leg, Trailer Jack # DL22320 fully. The overall, maximum height available is approximately 33 inches from the footplate to the bottom of the mounting plate. A couple of other dimensions you may be interested in are noted in the picture. The height of the mounting plate is 6-1/2 inches and the width is 6-5/8 inches. The distance from center of the mounting hole to center is 5-1/2 inches. I have attached a FAQ article...
view full answer...
- Drop Leg Square Trailer Jack Recommendation for a Car HaulerThe Pro Series Square Jack, # PS1400800383, is a weld-on jack. Once you start getting to higher capacities, like 5,000 pounds, you will see less and less bolt-on options. For a bolt on jack with a 2,500 pound capacity, we have # DL22320. Given the weight of a loaded car hauler this may not be enough. A weld-on jack like you referenced would be more ideal. Welding should be performed by a qualified professional welder.
view full answer... - Needing the Bolt Pattern and Dimensons for a Dutton-Lainson Tongue JackI have a solution to your question. For the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack, # DL22320, I have attached a photo of the mounting bracket. We have measured the bracket and the distances of the mounting holes and marked them for you in the picture.
view full answer...
- Recommended Sidewind Bolt-On Trailer Jack For 2,800 Lb TrailerThanks for all of the information you provided. It really helps when we make a recommendation that will work best for you. Based on the information you gave I recommend the etrailer Square, Fixed-Mount Marine Jack, part # MJSQ-2500B. This jack has a weight capacity of 2,500 lbs. Another jack I recommend is the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack, part # DL22320. This also has a 2,500 lb weight capacity.
view full answer... - Dutton-Lainson Replacement Jack Thanks for the picture! We don't offer replacement parts for what looks like a Dutton-Lainson side mount jack but we do have that jack. It is the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind - 28-1/2" Lift - 2,500 lbs item # DL22320.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Installed by:
Andrew K
Installed by:
Cole B
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Mike S
Updated by:
Alex H
Updated by:
Ryan F
Video by:
Jonathan Y
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Randy S.
2/6/2016
he best money I have ever spent for a product. I love the customer service and fast response with shipping...quality product that wont break when you need them!....lifetime customer here! Thanks E-Trailor!