bing tracking image
  1. Propane Fittings
  2. MB Sturgis
  3. Hoses
  4. Supply Hoses
  5. 6 Feet Long
  6. 3/8 Inch - Female Flare
MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 6'
MB Sturgis

MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 6'

Part Number: 100040-72-MBS
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$36.35
Retail:$42.13
You Save: 14%
Propane Fittings
Add to cart
MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 6' 6 Feet Long 100040-72-MBS
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Propane hose lets you connect RV appliances to the main LP supply lines in your RV. Female flare fitting connects to flared fittings found on many RV appliances. Male NPT threads connect to T-fittings in your RV. Also suited for natural gas. Great Prices for the best propane fittings from MB Sturgis. MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 6' part number 100040-72-MBS can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (42)
  • Q & A (0)
  • Photos

MB Sturgis Propane Fittings - 100040-72-MBS

  • Hoses
  • Supply Hoses
  • 6 Feet Long
  • 3/8 Inch - Female Flare
  • 3/8 Inch - Male NPT
  • MB Sturgis

Propane hose lets you connect RV appliances to the main LP supply lines in your RV. Female flare fitting connects to flared fittings found on many RV appliances. Male NPT threads connect to T-fittings in your RV. Also suited for natural gas.


Features:

  • Hose supplies propane gas to appliances in your RV
    • Connects to fittings on your oven, water heater, refrigerator, or other appliance
  • Female flare end connects to male flare T-fittings or on your appliance
  • Male NPT connection hooks up with T-fitting, gas manifold or regulator
  • Swivel collars on female end lets you easily hook up line without the hose twisting or kinking
  • Durable thermoplastic hose and brass fittings are approved for LP and natural gas
    • UL569 / CSA 8.3-1 certified
  • Made in the USA


Specs:

  • Temperature range: -40 F to 140 F
  • Hose dimensions: 72" long x 3/8" inner diameter
  • Hose fittings:
    • 3/8" Male NPT
    • 3/8" Female flare
  • Maximum pressure rating: 350 psi
  • 1-Year limited warranty


100040-72-MBS MB Sturgis High Pressure Propane Hose Assembly - 3/8" MNPT x 3/8" Female Flare Swivel Fitting - 72" Long





Customer Satisfaction Score:


Customer Reviews

MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 6' - 100040-72-MBS

Average Customer Rating:  4.9 out of 5 stars   (42 Customer Reviews)

Propane hose lets you connect RV appliances to the main LP supply lines in your RV. Female flare fitting connects to flared fittings found on many RV appliances. Male NPT threads connect to T-fittings in your RV. Also suited for natural gas.

by:

Great experience with eTrailer! They had all of the hoses and fittings that I needed to hook up a tankless propane water heater.



by:

Very Fast Shipping,



by:

Excellent quality. It seems five foot is a standard in this hose. Happy to see you had in six foot length.
Thanks



by:

Fast shipping.



by:

Good quality hose. Have a KZ trailer and had to replace one of the propane hoses hanging loose under the camper and this is better quality by far

Michael profile picture

Michael

4/28/2021

A year later this hose is better than the factory hoses that came installed on the camper, The old hose would kink when ben to tight, this one doesnt and I havent had any problems with volume flow since replacing the hose.



by:

Well built hose. Will work perfect for propane to trailer. Fast shipping and reasonable price. Highly recommend.

Joseph profile picture

Joseph

4/26/2019

Working great after a year!



by:

Clean fit between FlameKing double tank regulator and Duromax generator, without need for adapters. Unfortunately, before this purchase, I bought a less expensive hose without checking size of required female connector and had to find adapters to step it down to 3/8". Very happy with this purchase and intend to buy a second. Thanks



by:

Original hose ordered was nor in stock. Replacement item had a 3/8" female flare instead of the 1/2" flare I ordered, requiring me to have to buy and additional adapter.This error was offset by getting the item immediately rather than having to wait.



by:

Helped me connect two 100-pound propane storage tanks to my RV for cold weather living.



by:

Stacy was friendly, efficient and effective in helping me determine the right high pressure propane hose for my RV. I will be using Etrailer in the future.



by:

Part showed up and is correct. Thank you again



by:

Very fast shipping. Was exactly what I needed.



by:

Almost an exact replacement. Quality hose. Very prompt delivery using standard shipping. Easily tracked. Arrived within 1 day of expected arrival.



by:

etrailer was propt to get my order to me. This is a well made hose that looks to be made of quality at a very reasonable price. but then again thats all they do sale is quality parts.



by:

As with everything I've purchased from etrailer, great description, quality and price.



by:

Great service got the right products the first time my problem is solved thanks etrailer I'll do business with you again



by:

I replaced the factory hose with this high quality hose. Worked Great !!!!



by:

It went on easily and works wonderfully.



by:

Connected , tightened, pressured up. No leaks, works great.



by:

Excellent Customer service!
Excellent
service period!
Will not hesitate to buy from this company again!



by:



by:

Works as expected. Great!



by:

Quality hose. Worked perfectly.



by:

super helpful service



by:

Very good quality.


25
42
Show More Reviews

See what our Experts say about this MB Sturgis Propane Fittings

  • Availability Of A Propane Hose With 3/8" MNPT Fittings On Both Ends
    I am sorry but we do not have a propane hose that has 3/8" MNPT fittings on both ends. Every hose I have that has the 3/8" MNPT fitting has a 3/8" female fitting on the other end like part # 100040-72-MBS. There are no adapters available that would do the job either. I may be able to offer an alternative solution. It really depends what you are trying to accomplish exactly. Feel free to contact me directly and I will see if we have anything for you.
    view full answer...
  • 6 Foot Long Propane Hose with 3/8 inch Diameter and 90 Degree Elbow
    We might have what you need, basically this hose but with a 3/8 inch fitting instead? # CAM59035?
    view full answer...
  • Recommendation For 3/8 Inch Female Flare Swivel x 3/8 Inch MPT Propane Hose
    I believe we have exactly what you need. I recommend the MB Sturgis High Pressure Propane Hose, Item # 100040-72-MBS. This propane hose has a 3/8 inch male MPT on one end and 3/8 inch female flare swivel on the other. It is 6 foot long and has a maximum pressure rating of 350 psi. I have attached additional information and a video for you to check out.
    view full answer...
  • Picking Out Supply Hose for 2017 Forest River Heritage Glen, 5th Wheel 346RK Propane
    What you are looking for is the supply hose that runs from the regulator to the splitter. So for that we have 6 foot options like the part # 100040-72-MBS which use the standard 3/8 inch fittings on both ends. I also attached a link to a page that has all of the supply hoses we offer.
    view full answer...
  • Is An Adapter Needed For Automatic Changeover RV LP Gas Regulator
    You actually do not need the adapter you mentioned # 204120-MBS, your Automatic Changeover RV LP Gas Regulator # 37207-30395 has two 1/4" inverted flare fittings that connect to your propane tanks, and has a 3/8" female NPT connection that will connect to your trailer, and use # 100040-72-MBS to connect them together.
    view full answer...
  • Do I Need a Separate Low Pressure Regulator for a Camco Olympian Wave Heater
    Yes, you will need to use a low pressure regulator with the Camco Olympian Wave 8 part # CAM57351 but that is what the Camco Horizontal 2-Stage Propane Regulator part # CAM59323 is. Therefore, if you have the heater tied in after the above regulator then you won't have any issues. In order to attach the Camco Olympian Wave 8 to the manifold on your trailer you are most likely going to need the MB Sturgis High Pressure Propane Hose part # 100383-36-MBS for 3' long, part # 100040-72-MBS...
    view full answer...
  • Availability Of Replacement Hose For Damaged 3/8" Male and Female Supply Hose
    Thanks for the pictures! Your picture of measuring the female flare end show's it is 100% a 3/8" flare, so the # 37207-31455 will not work. Instead you'll need the # 100040-72-MBS which has the 3/8" female and male ends to match your current hose, but it will be bit longer than your 53" hose, as this one is 72" but is the closest we have to your current hose size.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Propane Trunk Hose from Regulator to Trailer
    It's hard to tell from the pictures what size fittings are being used but what you need is a trunk hose from your regulator to the trailer. Once you know the size of each fitting it shouldn't be difficult to find a hose. It looks to me likes it's probably a 3/8 inch for both of them which means you can use part # 100040-48-MBS for a 4 foot, part # 100040-72-MBS for a 6 foot, or part # 100040-144-MBS for a 12 foot. If it turns out the female end (regulator side) is 1/2 inch and the male...
    view full answer...
    Image 1 for Image 2 for
  • Equipment Needed To Hook Two Propane Tanks Up To A Propane Appliance
    You can hook the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS up between your two 20lbs propane tanks but the # 100473-12 will not work as supply lines because you need a male inverted flare tip like the MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare - 15" Item # 100575-15-MBS. Then you can use the MB Sturgis High Pressure Propane Hose - 3/8" MPT x 3/8" Female Flare Swivel - 6' Item # 100040-72-MBS as long as the grill you're hooking up to...
    view full answer...
  • Parts for Exterior 100 lb Propane Tank Connection to 3/4 Inch Inlet on House
    I don't know the code requirements for your house, but I do know what can physically work for your gas stovetop and fireplace. Since you will be supplying the 3/4 inch pipe, I recommend using the MB Sturgis RV Quick-Connect Propane Grill Hose - 120" Long # 100304-120-MBS which will connect to the MB Sturgis Quick Disconnect Propane Connector - 1/4" FPT # 104052-MBS which in turn connects to the POL # 204051-MBS for your tank. No regulator is needed on the tank side of the system as...
    view full answer...
  • What is the Fitting Size on the Stainless Steel Furrion 2-in-1 Range Ovens
    The 21" Stainless Steel Furrion 2-in-1 Range Oven # FSRE21SABL has a 3/8” Male Flare fitting. If you are wanting to use a 20 or 30 lb propane tank with this oven then I recommend using the 4' # 100040-48-MBS, 6' # 100040-72-MBS, or 12' # 100040-144-MBS hose along with a dual stage regulator, part # 108220 with the fitting # 204120-MBS for a single tank or part # CAM59005 for dual tanks. Once you have all of this connected you just need a pigtail like part # 100833-15 to your propane tank(s)...
    view full answer...
    Image 1 for
  • Parts Needed To Connect Two 20LB Propane Tanks To a Propane Converted Dryer
    To connect to your two 20lb propane tanks you will need 2 GasGear 90-Degree Propane Hoses # GS47FR. These will connect to a MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS. This regulator will put out up to 500,000BTU's at 11" Water Column. You will need to ensure this meets the requirements for your converted dryer. From the regulator a hose like # 100040-72-MBS is needed to run to the dryer. This particular hose is 6' long with a 3/8" NPT end to connect to the...
    view full answer...
  • What Can I Use to Get a 90 Degree Bend From My Propane Tanks
    I would recommend using something like the MB Sturgis Propane Elbow Adapter # 204163, which is an adapter that will allow you to get the 90 degree angle you are needing. This adapter has the same fittings the hose you were looking at has. I don't recommend bending the Propane Hose # 37207-31395 to get the 90 degree, because while it is made to reduce kinks, you are going to be reducing the gas flow by putting such a big bend in the hose. You can use hose # 37207-31395 after the adapter...
    view full answer...
  • Regulator and Hoses Required for a Dyna-Glo 20000 BTU Wall Heater
    According to the user manual for Dyna-Glo wall heaters, they require a propane gas line pressure of 11in WC (water column). You will need a 2-stage regulator to reach this pressure level like part # 37207-30375. This regulator comes with the POL fitting that will thread directly into the valve on your tank and you will just need a supply hose to go from the regulator to the heater. We have these hoses available in the following lengths: 12 ft - # 100040-144-MBS 6 ft - # 100040-72-MBS 5...
    view full answer...
  • Replacing A 60lbs Propane Tank With Two 30lbs Propane Tanks
    The Automatic Changeover RV LP Gas Regulator Item # 37207-30395 has a 3/8" FPT outlet connection so if the connection you have on the yellow line running into the house is a 3/8" male flare fitting (MIF) you'll be able to use the # 100040-72-MBS. Just looking at the picture it looks like the connection is probably female so I'll need to know the actual size to find the correct adapter for you. If you want to send in more pics of the connection on your yellow gas line I can find you the...
    view full answer...
    Image 1 for
  • Minimum PSI For A Propane Hose
    The MB Sturgis High Pressure Propane Hose - 3/8" MPT x 3/8" Female Flare Swivel - 6' Item # 100040-72-MBS doesn't really have a minimum PSI. The hose can handle up to a maximum of 350 PSI. The minimum would be related more to the appliance you're using and what minimum pressure it needs to operate properly.
    view full answer...
  • Removing Two 30 lb Propane Tanks and Replacing Them With 100 lb Propane Tank
    You can remove your two 30 lb tanks and add a 100 lb tank, but you will need a number of parts, including a new regulator for a single tank. What you will need are the MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare - 3' # 100019-36 to attach to your tank, then the MB Sturgis Horizontal 2-Stage Propane Regulator # 108221. You will need to attach the MB Sturgis Propane Adapter Fitting w/ Back Check - 1/4" Female Inverted Flare x 1/4" MPT # 204120-MBS to...
    view full answer...
  • Recommended Propane Regulator and 8 to 10 Foot Hose to Supply a Food Trailer
    To supply your food trailer from your 100 pound tank you're going to need a pigtail, like part # 100473-20-MBS, that goes from the tank to a regulator. The regulator needs to be a 2-stage regulator like part # 108220. Then from the regulator use part # 100040-144-MBS. It's 12 feet long so more than what you need but we don't have an 8 to 10 foot hose that has a 3/8 male to connect to a regulator with a 3/8 female flare on the other end. The next shortest option we carry is 6 feet long,...
    view full answer...
  • Does MB Sturgis Propane Hose Come Shorter Than 6 Feet?
    The MB Sturgis High Pressure Propane Hose # 100040-72-MBS does not come in 12 inches or 18 inches; the shortest length this hose comes in is 48 inches, # 100040-48-MBS. I've left a link to a video review of this product for you.
    view full answer...
  • MB Sturgis 2 Stage 11" W.C Regulator With 6' Hoses
    We currently carry the MB Sturgis Vertical 2-Stage Propane Regulator # 108220 which is a 1/4" female NPT inlet, 3/8 female NPT outlet, 2 stage propane regulator. In stage 2 this regulator will reduce pressure to 11" W.C to allow for safe gas flow to your appliances. Be sure to use teflon tape like # A05-0265 to properly seal your NPT fittings. We do not currently carry any regulators that are 1/2", the largest inlet/outlet we have is 3/8". We do carry the MB Sturgis High Pressure Propane...
    view full answer...

Do you have a question about this Propane Fitting?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Cody B
Updated by:
Cody B
Employee Carrie F
Updated by:
Carrie F
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924