Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re parked and moving around inside, even a little rocking can get annoying fast. These Ark Drop Down Corner RV Stabilizer Jacks use a locking swivel bracket and a large grip handle to keep your chassis secure and minimize movement. The handle makes it easy to swivel the jacks into position, then lock them down tight for a solid, steady setup that feels stable underfoot.
Uneven or soft ground doesn’t have to make your trailer wobbly. Each stabilizer has a large, flat load-bearing foot that spreads weight evenly to keep things firm, even on dirt or grass. The foot locks away when not in use and includes silencer pads that reduce vibration noise during use or travel.
Moisture, mud, and road grime can quickly eat away at unprotected metal. These jacks feature a zinc finish that provides corrosion resistance, helping them handle long-term outdoor use. You can count on them to stay smooth and functional through all kinds of weather.
Getting the steadies down is quick thanks to the included winding handle and hex drive design. The manual mechanism makes dispatching the 24" long corner steadies straightforward, so you can stabilize your rig without fussing with complicated tools or power connections.
Each jack delivers reliable support once installed, with a 1,929 lbs weight capacity when mounted in 90-degree positions. With two included in the kit and a weld-on installation, you get a sturdy foundation built for long-term stability and confidence every time you park.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Ark dropdown 24 inch long corner stabilizer jacks for a quantity of two. Now this stabilizer kit will come with the necessary equipment to minimize chassis movement in your camper or trailer. It includes the two jacks and the winding handle.Now these are corner stabilizer jacks. They help keep your chassis secure. They do use the twin pin locking swivel bracket with a multi positioning plate that'll give you different angles for the leg to swivel to. It uses this fold away large grip handle for comfortable and easily swiveling of the jack leg.
And they're connected to the two spring loaded pins.What you want to do is you want to rotate it, just pull it open and it'll let you rotate it to different position. And you can see the lock into place. So with this mounted on your trailer, you can see, you can put it at many different angles.If you want to totally put it up out of the way when you're traveling, just put it in the position there and you can see with it mounted under it, it'll hold it up out of the way.If you notice it has the large load bearing feet. They're ideal for soft ground. They do swivel to accommodate different terrain.
And you can see when the Jack is fully retracted, that foot will lock into place. The foot plate does measure six inches by six inches.Now to rotate it back to use it, just swivel it like that and release it and it'll lock it into place. It does come with this winding handle with the three quarter inch hex drive on it. That'll make extending or retracting your jack leg really simple. Basically, if you push your handle out of their way, put that right there and then as you twist this, you can see as you twist it this way, that'll extend the jack out to where you need it and if you do it the other way it'll retract it.Now when it's fully extended, height is 24 inches.
When it's totally retracted, like the position it is in now, is 16 inches tall. If you notice the heavy duty mounting brackets on the top here with the hardware, that's for installing it onto your trailer. This all has a nice zinc finish to it, provides corrosion resistance.And one last note on these jacks. These are stabilizer jacks, so they are not designed to do any lifting of the weight. They are only to be used to stabilize your camper or your trailer.But that should do it for the review on the Ark drop down 24 inch long corner stabilizer jacks for a quantity of two..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
very well build jack. Love them and worth every penny.
Awesome stabilizer.
These things are burly! Much higher quality product than originally came on my trailer.
Installed on my enclosed trailer conversion.. works great so far
Love the stabilizer. Package reall beat up. But luck no damage. Told several friends. They wiil be buying soon!
We mounted ours above the frame and love that we can take our camper into the woods on bad roads and never have to wonder if our rear jacks will still be there when we get ready to set up! We’ve had ours on for a year now and highly recommend.
Replaced flimsy rusting scissor stabilizers w weldable mount Ark 24” Stabilizer, made paper templates for old mounting holes using center punch and drill press for the plates then replaced 5/16” bolts with 5/16”x 31/2” bail hitch pins for removing for boondocking on the washboard roads as they are heavy duty & mounted on an ATC aluminum trailer frame. Well built and beefy the zinc plated steel is better than powder coated sheet metal for rust control and a better looking rig
excellent quality. firmed up the frame to ground when parked. folds up nice
Arrived fast. Innovative, sturdy design. Detailed eTrailer video helped with decision.
I have done business with e-trailer a number of times. This time however, the shipping was slower than I had expected for an item I thought was "on the
shelf". I sent a comment to e-trailer and got a quick reply. "The Virus going around has slowed them down", Which reminded me that there are occasionally reasons for delays that are bigger than all of us.
E-trailer is a very good online business. The trailer jacks that I bought are exactly as advertised, well made, heavy duty, and once I get them installed I'm sure I will be happy with my purchase.
Bob Sterling
Sterling Electrical Services
San Leandro, CA.
Robert
5/16/2021
Jacks are solid and continue to work well after a year, I still consider them a good buy.
I've built my 6X12 enclosed utility trailer for hauling my motorcycle, and camping in it when out riding. Replaced the rear jacks with the cheapest thing I could find after ripping them off once. Decided it was time for some quality replacements, and saw these ARK units on etrailer.
Worth every penny when I opened the box.
Made a project day out of the install and I am very happy now. Welded on the brackets (supplied) and found that I don't even need a tire jack for the trailer anymore. These lift the trailer wheel completely off the ground if needed.
Heading to Death Valley next month to try them out in the field.
Thank you etrailer once again.
Jeff
3/4/2023
A year later and a few trips, I have absolutely no regrets. Best jacks for trailers out there. When I mounted them, I could have put them a touch higher as I have to make sure the back of the trailer is high enough to swing them down. Ive even used them to lift the trailer and change a wheel bearing.
We installed these stabilizers on the rear of our trailer after the original standard ones got damaged more than once on steep driveways. These are able to be recessed out of sight and easily pop down and adjust. If you’ve had this problem, you should switch.
Works well. A little modification was required to mount, but that's not unusual for any aftermarket product.
My original scissor style were bent from hitting objects 1 foot high. These nest much closer to the frame and look sleeker. Bright aluminum(?) with blue handle. Simple pull of the coated handle to lower. Standard lug ratchet to finish extension and a preset length option speeds the process, and to prep to return to storage/travel position. I would recommend.
Brooke M.
2/11/2025
It would be nice if aftermarket trailer parts were standardized, for sure! But Im glad for the most part it was a smooth install. If you ever wanted to add photos of the jacks installed to your review, we would love to see them!
I like them. Have not installed them yet. I have to bespoke some custom steel brackets for this application.
I put the jacks on an over lander trailer I built to be pulled by my Atv. The jacks worked excellent to prevent side to side movement.
Added one to each rear corner of my trailer to prevent it from lifting the rear of my truck when I load a 2,400lb compact tractor. Wasn't sure if they'd be strong enough when I was ordering them but after receiving them they are perfect and very well made! Works perfect
The box was a little beat up but, after all they are heavy steel parts and they are trying to keep the weight down for shipping coasts. The stabilizers were in great shape. I liked that the mounting brackets are removable and made it convenient to weld in place. The brackets could be bolted on but, you would have to countersink the bolts as there is about 1/8" clearance between the bracket and stabilizer body. I'm very happy with them and would recommend them. I would like to have etrailer show all the dimensions and capacities.
Ordered these to replace the poor quality jacks that came on my 17 ft. camper. The installation was a bit tricky as I had to mount the new jacks differently than the standard installation, but they work very well and are of good quality.
Love these stabilizer jacks. The only thing I wish is it was able to lift and not just stabilize. It would be nice for changing tires on my small off road trailer.
Jenny N.
4/20/2022
We do carry a product that will allow you to raise the trailer quickly to change a tire. It is part # AM3620.
I like the jacks,I didn't weld what was told,I drilled holes in the mounting bracket counter sunk for bolts, I drilled and taped holes to screw mounting bracket to frame, then I used brass angle iron to bolt to mounting bracket and trailer frame to make sure all was secure, bolted everything on to frame using stainless steel bolts and the brackets are brass,so noting rust. I fell much more confident on the way I mounted the jacks ratter then welding and have no distortion or messing up the trailer frame. Very happy on how I did it and it works great.
These stabilizer jacks worked perfectly for my application. Very well made.
The package arrived very abused. I would advise to ship in another heavy gauge box. Product is solid. I had to modify product with fastener holes to mount, as well as grind to allow bolt clearance.
Fast shipping and excellent customer service. Jeremy was very helpful selecting the correct part.
Awesome Jack Stabilizers. Very Easy to Install. Great Quality!
Jonathon
4/15/2026
Awesome!
These are so great, I'm buying two more for the back of the camper to replace the originals. Easy-to-use, quick setup.
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William B.
7/22/2022
Love them.