Weight of ARK AR34FR Drop Down RV Stabilizer Jacks

Question

Question:

How much do these stabilizers weigh?

asked by: Paul

1

Helpful Expert Reply:

The ARK # AR34FR Drop-Down RV Stabilizer Jacks weigh 12 lbs each, or 24 lbs in total.

Because the jacks are meant to hold an RV stable and are not designed for lifting, the do not carry a stated weight capacity.

If you click the provided link, you can take a look at a product description video for the stabilizer jacks.

expert reply by: Mike L

1

Answer 1

Hey Brent! I would mount the Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR on the outside as close to the corners as possible. If you mount them in the center of the trailer they won't add nearly as much stability. If you're worried about…

view full answer...

Answer 2

You get all the hardware needed to complete two 2 inch x 8 inch boards to make a pair of ramps in the ramp kit, part #288-07400.

view full answer...

Answer 3

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 4

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 5

Hey Doug, welcome back! The Leveling Scissor Jack - 24" Lift - 5,000 lbs item #JSC-24-IND and the Scissor Stabilizer Jacks - 18-3/4" Lift item #TJSCHD-24 are going to be made of the same 14 gauge steel. The difference in capacity has to do…

view full answer...

Answer 6

Hey Phillip, thanks for reaching out! The closest we have to a direct replacement size-wise is the 3.2 Cu Ft Everchill RV Mini Fridge #324-000111 which measures 17-1/2" wide x 30-3/4" tall x 19-1/8" deep. If you are able to make about…

view full answer...

Answer 7

Hello Frank, thanks for reaching out. The hands-free liftgate sensor on your 2025 Toyota Crown Signia will still work after installing the Curt Hitch Receiver #C35MJ. In most cases, what will happen is the area directly below the receiver will be…

view full answer...

Answer 8

Hey Frank, I did some checking with Coleman and the heat strip you have now on your Coleman Mach would work with a higher 15k rated unit like the part #CM69RR that you referenced. How well does the heat strip work for you?

view full answer...

Weight of ARK AR34FR Drop Down RV Stabilizer Jacks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching