See what our Experts say about this TruRyde Trailer Spindles

• Replacement Hub Components for Hub 9606020
  While the # L68149 most likely corresponds to the inner bearing number of your hubs. If this is the case, you have either a 3.5k or a 4.4k axle. In order to know absolutely sure, you need to know the corresponding outer bearing number or the inner and outer diameter of the grease seal. You most likely need to wipe away the grease in order to reveal the outer bearing number. In order to accomplish this, I recommend using calipers like the 4" Carbon Fiber Digital Caliper # PTW80157. I...
  view full answer...
  
• How to Determine Hub and Spindle Size
  The spindle dimensions are as follows: A is the mounting dimension, B is the seal dimension, C is the inner bearing surface, D is the outer bearing surface and E is the diameter of the threaded portion of the spindle for spindle nut selection. Say you need a spindle and hub for a wheel with 5 on 4-1/2 inch bolt pattern and an axle that is 3500 lbs. For a single axle trailer you can use two of either the item # TRU64FR, if your axle is round or item # TRU47FR if your axle is square. Then...
  view full answer...
• Replacement Hubs for Hadco Eng 440 Hubs
  Thanks for the picture and the information Jonathan! I am sorry like you I can not find anything that has an outside bearing that measures .85. The only solution I have to offer you is to cut off your spindles and replace them with the #84 Spindle for 3,500-lb Trailer Axles item # TRU64FR. Then purchase corresponding hubs that work with the new spindle size. The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles item # AKIHUB-545-35-EZ-K would work great and they have a 5 on 4-1/2...
  view full answer...
• What Size Axle Tube Does Spindle # TRU64FR Normally Use
  Hey Kyle, since the spindle part # TRU64FR is designed for a 3,500 lb axle the correct axle diameter it is designed to work with is 2-3/8 inch. Are you building an axle?
  view full answer...
• What Spindle do I Need to go With the CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles?
  Hello Jason, Since you need the CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13515 you will want the #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR. When swapping out a new spindle it needs to be precise. If you are not an experienced welder then I suggest having someone put it on for you. If you are experienced welder, then as Larry the Cable guy says, "Git-R-Done!" Looks like you already knew the parts you...
  view full answer...
• Recommended Replacement Spindles for a Dexter Trailer Idler Hub Assembly W/ a 6 on 6 Bolt Pattern
  Hey Steve, the #84 Spindle for 3,500-lb Trailer Axles # TRU64FR is not going to work with the Dexter Trailer Idler Hub Assembly for 6,000-lb Axles # 42660UC1. You'd actually want to use either the #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles # TRU57FR or the #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles # TRU37FR for an E-Z lube spindle. What kind of trailer are you hauling? If there is anything else I can do for you, please feel free to drop a comment and let me know.
  view full answer...
• Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
  The Kodiak 10" Hub-and-Rotor Assembly # KHR10D matches the TDE 46245 that you currently have. The hub has a disc rotor and 5 on 4-1/2" bolt pattern. The Hub Bearing Kit # BK2-100 contains the races, bearings and grease seal for you to be able to mount it to a spindle like the #84 Spindle for 3,500-lb Trailer Axles # TRU64FR
  view full answer...
  
• What Size of Spindle is Needed for a 3,500-Lb Axle
  I have three spindles that are for a 3,500-lb axle and have the bearing dimensions you have listed. The only difference is the dimension for the grease seal is 1.75 inches, not the 1.795 inches that you have mentioned. Maybe you typed in the seal diameter wrong. The hub number you have mentioned is just a casting number, not a part number. The three spindles I have for a 3,500-lb axle are as follows. #84 Spindle - 1-3/4" Diameter (8-1/4" OAL) # TRU64FR #84 E-Z Lube Spindle w/ Brake Flange...
  view full answer...
• Troubleshooting Hub and Spindle Not Fitting Together after Replacing Spindle on a Utility Trailer
  It sounds and looks to me like you have the wrong hub assembly for the spindle that is welded to the axle on your trailer. The photos you sent clearly show a 1-1/16 inch spindle similar to the BTR EZ Lube Spindle item # TRU44FR. This is a spindle for a 2,000 pound axle. The parts that you referenced are for a 3,500 pound axle and definitely will not work on a spindle designed for a 2,000 pound axle. In addition, the photo of the hub that you sent looks like a hub for a 3,500 pound axle,...
  view full answer...
• Replacement Spindle For Jet Ski Trailer With 2,700 lb Capacity
  Appreciate all that information, but unfortunately we do not have a 2,700 lb spindle, or one with those bearings and seal. The best I can offer is to go up to a 3,500 lb spindle, and you'd also need new hubs. What you can use is the following: - #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR - Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-K I realize this isn't exactly what you were looking for, but I did want to mention...
  view full answer...
• What Size Spindle do Bearings L68149 and L44649 fit on
  Yes, you are going to want a spindle that has the 1.063" and 1.378" measurements. This is commonly known as a #84 spindle and can be found on our site with a few variances. For example, the TruRyde EZ Lube Spindle # TRU74FR comes with a brake mounting flange and a grease zerk fitting while the Redline Spindle # TRU64FR does not come with the flange or a zerk fitting. These fit the typical round applications but we also have one for a square application with part # TRU47FR. Any of these...
  view full answer...
• Replacement Hub And Spindle For TieDown 3,500-lb Axles
  I spoke with Dexter Marine of Georgia, who bought the running gear portion of TieDown (axles, actuators, brakes, brake lines, spindles, leaf springs and hubs), and they mentioned that you can use a Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K for replacement hubs, and you can use these #84 spindles, depending on the length of the spindle needed: -For a #84 spindle, with 8-1/4" overall length, you can use # TRU64FR. -For a #84 spindle, with 9" overall length,...
  view full answer...
• Replacement #84 Spindle for Dexter 3500-lbs Axle
  As long as you've got a 3500-lbs EZ Lube axle then you can use the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR to replace your spindle; if you don't have EZ lube axles then you'll want to use the #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR and Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34. Both of these spindles take # L68149 inner and # L44649 outer bearings. To replace the hubs you'll want to use...
  view full answer...
• Replacement Spindles For 3,500LB Trailer Axle With Tapered Spindle with 1-1/16" & 1-3/8" Bearing ID
  We do have the following replacement spindles that will fit on your axle. #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter # TRU24FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU84FR #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter # TRU64FR #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR
  view full answer...
• Recommended Tapered Spindles for 3,500 lb Axle
  Given the measurements you provided, there are three spindles we offer for a 3,500-lb axle: #84 Spindle - 1-3/4" Diameter (8-1/4" OAL) 1,750 lbs part # TRU64FR #84 EZ Lube Spindle 1-3/4" Diameter (9" OAL) 1,750 lbs part # TRU74FR #84 Spindle - 1-3/4" Diameter (11-1/4" OAL) 1,750 lbs part # TRU84FR The bearing surfaces of each of the three are the same, with the difference being the overall length of the spindle. I would recommend using a digital caliper and comparing the bearing surfaces...
  view full answer...
• Replacement Idler Hub Options For a 30 Year Old Homemade Trailer With 68149 & 12749 KOYO Bearings?
  I have a couple recommendations for you as your current spindle size is obsolete. First you can have 2 new Spindles # TRU64FR welded on your axle to use the current Hub # AKIHUB-545-35-EZ-K. The simplest option may be to use the CE Smith Trailer Axle w/ Idler Hubs # CE33201GA-HUB. This gives you an all new axle and hubs so you do not have to worry about welding the spindles on straight or the axle tube bending due to the age of the steel.
  view full answer...
• Spindles That Will Work With Dexter Trailer Hub Assembly # 84545UC1-EZ
  We offer 3 spindles that have the dimensions compatible with the Dexter Trailer Hub Assembly, part # 84545UC1-EZ. The first is part # TRU74FR. This is a 1.75 inch round EZ-Lube spindle with a grease fitting and a brake flange. This spindle has an overall length of 9 inches. The next is part # TRU64FR. This is a 1.75 round spindle that does not have the brake flange or grease zerk fitting. This spindle has an overall length of 8-1/4 inches. The third is part # TRU24FR. This is a 2 inch...
  view full answer...
• Spindles for a Trailer Hub Assembly for 3500 lb Axle
  The following spindles will fit hub 84545BX 1. Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide (8-1/4" OAL) # TRU47FR 2. #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (8-1/4" OAL) # TRU64FR 3. #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (11-1/4" OAL) # TRU84FR
  view full answer...
• What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
  The Trailer Hub Assembly # 84550BX that you referenced will use # L68149 as the inner bearing and # L44649 as the outer bearing. These are the inner and outer bearings used by a # 84 spindle. We offer the following spindles: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (11-1/4" OAL) # TRU84FR [R2061-284] #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter (9" OAL) # TRU74FR [R20384EZ] #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (8-1/4"...
  view full answer...
• Spindle Replacement Recommendation For Donahue Horse Trailer
  In order to make sure you get the right components for your Donahue Horse Trailer, we will need some more information. If you are wanting to replace the spindle, the first thing you will need to know is the weight capacity and dimensions of the axle you plan on using the spindle on. Please keep in mind that installing the spindle require welding it to the axle by a certified welder. They use special jigs so that it is concentric and square on the axle or it can cause problems with uneven...
  view full answer...
• Spindle Recommendation for a Hub that Has Bearing Dimensions 1.06 and 1.38
  The spindle we offer that has the closest dimensions to what you listed will be an 84 spindle like part # TRU64FR. The surface of the spindle where the bearings will ride is 1.06 inch and 1.38 inch which is pretty close to what you have but not exact so you would want to double check the measurements you took. For a hub then with the bolt pattern 5 on 4-1/2 inch like you said you need you would want the part # 84545BX.
  view full answer...
• Do You Have a Replacement Wheel Hub For a Discontinued Harbor Freight Boat Trailer?
  Unfortunately Tim, I have no way to know for sure what size spindle you have on your discontinued Harbor Freight boat trailer. If you can provide me with the measurements off your spindle as seen in the image below I can see if we have a hub which will fit but as is most common with Harbor Freight trailers I have seen you are most likely going to need 2 new Spindles # TRU64FR and Hubs # AKIHUB-545-35-G-EZ-K.
  view full answer...
• Do You Have a Weld On # 84 Spindle With a Grease Zerk For E-Z Lube Hubs?
  The #84 E-Z Lube Spindle # TRU74FR matches the dimensions of the #84 Spindle # TRU64FR and will have the E-Z lube spindle and a brake flange. With the brake flange the stub will be 3/4" longer. If necessary you can cut off the brake flange to get the correct length but otherwise it will not affect the operation of a non braking idler hub.
  view full answer...
• Trailer Hub To Spindle Combinations for 2000 Pound or 3500 Pound Axle
  The HUB KIT # 8-259-5UC1, uses a 1,000 pound spindle, item # TRU44FR. This setup is for a 2,000 pound axle. The #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter, item # TRU64FR, is for a 3500 pound axle. If you need a hub and spindle for a 3,500 pound axle then you would use the # TRU64FR spindle and the Trailer Hub Assembly for 3,500 lbs Axles with 5 on 4-1/2 bolt pattern, item # 84545BX.
  view full answer...

Do you have a question about this Trailer Spindle?