Trailer Hub To Spindle Combinations for 2000 Pound or 3500 Pound Axle
Published 11/18/2009
Products Featured in This Question
Question:
IM BUY HUB KIT # 8-259-5UC1 , IS SPINDLE PART# TRU64FR THE RIGHT ONE PLEASE GET BACK TO ME SO I CAN ORDER THE UNITS
asked by: DAN
0
Expert Reply:
The HUB KIT # 8-259-5UC1, uses a 1,000 pound spindle, item # TRU44FR. This setup is for a 2,000 pound axle.
The #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter, item # TRU64FR, is for a 3500 pound axle. If you need a hub and spindle for a 3,500 pound axle then you would use the # TRU64FR spindle and the Trailer Hub Assembly for 3,500 lbs Axles with 5 on 4-1/2 bolt pattern, item # 84545BX.
expert reply by:
Robert G
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Spring Towing Readiness Checklist
- Q&A: How To Find Correct Replacement Bearings and Hub for Floe Snowmobile Trailer
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Hubs for 1" Straight Spindle With 5 on 4-1/2 Bolt Pattern Using 13" Wheels.
- Article: Trailer Tire Sizing
- Q&A: Recommended Trailer Hitch for 2017 BMW X5 M Sport
- Q&A: Recommended Hub For Reliable BT150A Axle
- Q&A: How Much Do the Demco Autoslider Hitches for the 2024 Chevy Silverado 2500 w/ Puck System Weigh?
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub