Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
Updated 01/24/2022 | Published 01/23/2022
Products Featured in This Question
Question:
I need a hub/rotor TDE 46245 MIN. THK. .850IN. Also the bearing kit and spindle
asked by: J. W
0
Expert Reply:
The Kodiak 10" Hub-and-Rotor Assembly # KHR10D matches the TDE 46245 that you currently have. The hub has a disc rotor and 5 on 4-1/2" bolt pattern.
The Hub Bearing Kit # BK2-100 contains the races, bearings and grease seal for you to be able to mount it to a spindle like the #84 Spindle for 3,500-lb Trailer Axles # TRU64FR
expert reply by:
Bud M
0
Customer Image
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: How To Find Correct Replacement Disc Brake Pads for TDE 46245
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Can Kodiak Hub # KHR10D Replace Trailer Hub TDE 46245
- Q&A: Replacement Hub and Rotor Assembly with 5 on 4-1/2 Bolt Pattern for 3,500 Pound Trailer Axle
- Q&A: Disc Brake Kit to Replace TDE 43245 with Stainless Steel Components
- Q&A: Replacement Disc Brake Kit For Homemade Boat Trailer and TDE 46245 Rotors
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: Dexter 10" Hub-and-Rotor Assembly: The Breakdown
- Shop: Gooseneck Hitch
- Search Results: rg06~050
- Video: The Low-Down on the DeeMaxx Ceramic Brake Pads with Steel Back Plates- 3,500 lbs to 6,000 lbs
- Search Results: l68111
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Best 2014 Ram 3500 Gooseneck Hitch Options
- Video: All About the Kodiak Ceramic Brake Pads
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Search Results: tmk23vr
- Search Results: tmk73vr
- Search Results: l44649
- Search Results: lm67048
- Search Results: bearing buddy trailer bearings races seals caps
- Video: Feature Review Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies