How Far Out will a Hub Face be on a #84 Trailer Spindle

Updated 06/27/2018 | Published 06/26/2018

Products Featured in This Question

#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter

(129)

$64.54

#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter

(192)

$90.51

Question:

Can you tell me how to figure exactly where the hub face will land with #84 spindle and standard 6 on 51/2 hub #akihub-655-35-ez-k. I need to be able to figure out tread width for an off road trailer

asked by: Steve V

Expert Reply:

I can tell you roughly where the hub face will be on a #84 spindle but I would have to use # TRU74FR as an example. On this spindle from the brake mounting flange to the hub face it will be approximately 3 to 3-1/2 inches.

Since spindle # TRU64FR does not have a mounting flange you would be looking at the distance from about an 1 back from the line between the raw steel and the machined steel on the stub to the hub face.

These are the best guesstimates I can provide without having everything installed. I have attached a video with measurements you can check out.

expert reply by: Michael H