Product Experts Available Now!
Call 1-800-940-8924
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
(921 reviews)
Price: $79.60
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
Part Number: 8-259-5UC1
In Stock
$79.60
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (921)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-259-5UC1
Highlights
- Fits 2,000-lb Axles: For idler setups with BTR spindles and both inner and outer L44649 bearings (1.063" ID).
- 5 on 4-1/2" Bolt Pattern: Matches standard 10"–12" trailer wheels for easy wheel pairing.
- Complete, Ready-to-Install Kit: Includes bearings, races, grease seal (10-9), grease cap, wheel bolts, and lug nuts.
- Built for Long-Term Use: Sturdy iron hub rated for 1,000 lbs per hub for dependable towing.
- Sized for Precise Fit: 5-1/2" hub flange and 1.986" grease cap flange diameter ensure proper alignment.
Features to know about
Simple, Complete Replacement: All Parts Included for Quick Setup
Swapping out a worn hub doesn’t have to turn into a parts hunt. The Dexter Trailer Idler Hub Assembly for 2,000-lb axles comes complete with inner and outer bearings (L44649), matching races (L44610), a 10-9 grease seal, grease cap, wheel bolts, and lug nuts. Everything’s right there in the box, ready to bolt on. It’s a straightforward fix that saves time and keeps your trailer rolling smoothly.
Built for Steady Use: Iron Construction That Handles the Load
This hub is made from sturdy iron built to handle consistent towing with confidence. Each hub supports up to 1,000 lbs of weight capacity and fits 2,000-lb axles with BTR spindles. The solid build gives you dependable performance whether you’re hauling gear for work or heading out for the weekend.
Straightforward Fitment: Designed for Standard 5 on 4-1/2 Bolt Pattern
Finding the right hub is easy thanks to its standard 5 on 4-1/2 bolt pattern. The hub flange measures 5-1/2" in diameter and works with trailer wheels from 10"to 12 . With 1/2"wheel bolts and a grease cap flange diameter of 1.986 , it lines up cleanly with common wheel setups so installation stays simple and accurate.
Reliable Bearing Match: Confirm Fit with L44649 Stamping
Getting the right fit starts with matching your bearing numbers. If your current hub’s bearings are stamped L44649 (1.063" inner diameter), this Dexter assembly will fit your spindle correctly. That small detail makes a big difference in keeping everything properly aligned and running smooth trip after trip.
Specs
Application
- Application: 2,000-lb trailer axles with BTR spindles
Wheel Compatibility
- Wheel size: 10" to 12"
Dimensions
- Hub flange diameter: 5-1/2"
- Grease cap flange diameter: 1.986"
- Wheel bolt diameter: 1/2"
Bolt Pattern
- Bolt pattern: 5 on 4-1/2"
Weight and Capacity
- Weight capacity: 1,000 lbs
Bearing, Race, and Seal Information
- Bearings (included): Inner bearing: L44649 (1.063" inner diameter), Outer bearing: L44649 (1.063" inner diameter)
- Races (included): Inner race: L44610, Outer race: L44610
- Grease seal (included): 10-9, Inner diameter: 1.5", Outer diameter: 1.987"
Note
- Note 1: Some axles rated at 2,000 lbs require a different seal and bearings. Be sure that the bearings in the hub being replaced have L44649 stamped on them. If the bearings have L44643 stamped on them, use 34822545BX trailer hub.
- Note 2: Trailer wheels that are smaller than 15" and have 5 bolts, have a 5 on 4-1/2" bolt pattern.
Determining Bolt Pattern
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
008-259-91 Dexter Trailer Idler Hub Assembly for 2K Axle with Hardware - 5 on 4-1/2 - L44649 Bearings
Replaces 8-259-5UC1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.7
921 reviews
by:
Mike M
01/07/2020
Hubs and bearings were a perfect fit ! Etrailer is excellent also got tires and bearing buddies as well.
by:
Troy L.
11/11/2016
after visiting 2 local parts stores and still not getting what I needed, I decided to use etrailer. within a couple minutes I had found exactly what i needed. I took all the stuff back to the auto parts store and bought from etrailer for way cheaper! Parts fit perfectly and customer service was excellent. First rate business all the way, in my opinion. Very happy with my etrailer experience.
by:
RobM301
08/22/2018
Ordered two replacement hubs for my 5x8 trailer. Sort of guessed at correct hubs. No much info remaining on trailer (make, model, etc.). All I knew was that they were 5 on 4.5 Dexter hubs and the number 08-259 stamped on the old hub. There are a number of dexter hubs on etrailer and info on them is sparse so just made my best guess based on the application of trailer use.
George J upgraded my shipment from 5-7 to 3-5 day express shipping at no additional charge and the package was received on the exact day estimated. Thanks for the special treatment.
Unfortunately UPS delivered the package next to a tree in the middle of a rain storm so when I got to package a few hours later it fell apart in my arms.Fortunately inside the individual boxes the parts were in a plastic bags with only a minimal amount of water dampness inside.
Would I use etrailer again?...Absolutely! Correct parts received, packaged well and fast shipping. Great job!
George J upgraded my shipment from 5-7 to 3-5 day express shipping at no additional charge and the package was received on the exact day estimated. Thanks for the special treatment.
Unfortunately UPS delivered the package next to a tree in the middle of a rain storm so when I got to package a few hours later it fell apart in my arms.Fortunately inside the individual boxes the parts were in a plastic bags with only a minimal amount of water dampness inside.
Would I use etrailer again?...Absolutely! Correct parts received, packaged well and fast shipping. Great job!
by:
Daniel
04/08/2013
Replaced hub on a snowbear trailer with a failed wheelbearing. Hub set included everything required (save your hub nut and cotter pin). Function is same as original hub, however, original hub has a full flange. Quality seems OK, however, original equipment was also a Dexter hub. Hope this wheel bearing is better than original equipment.
by:
Brian S.
09/15/2017
Product arrived quickly. These were Trailer Hubs. Each hub was not restrained by packing and as they bounced around in the box. Needless to say the dust caps were dented to the point where they could not be used. I used the old ones instead.
by:
Brian D.
07/23/2014
This product was exactly as described on the website. On line product information/demos are very helpful. I placed the order by phone as there were concerns on ordering the correct parts. Customer service rep Bill E. was excellent in satisfying my concerns and processing the order efficiently. Prices are the best I could find.
by:
Ralph
02/26/2017
Just what I needed. Everything was great except dust cap did not fit properly.
Ralph
2/26/2018
Still great, no problems.
by:
Doug N.
04/13/2013
Great hubs at a great price. Fully loaded minus the grease. Mine shipped with a double lip seal. Not sure if it was supposed to as I ordered extra seals because it wasn't supposed to have a double lip seal. The good news is now I have a spare set of seals.
by:
Todd L. Tish
11/20/2013
Everything fit and functioned as expected. The one issue I found was the quality of the dust cap. I reused the original cap. It was more solidly built than its replacement, as typical of today's products.
by:
Ray C
07/17/2013
Product arrived on time. Being a rookie at changing out the hub and bearing on my trailer would have been nice to have assembly instructions included or a video on the website on how this product goes together.
by:
Ames Denis
11/18/2013
I called first and talked to a real person who help to confirm that this part was a universal replacement for my axel. Parts arrived quicker than anticipated - and assembled like new. Thanks E-trailer.
by:
Walt A
12/18/2010
I have been constructing a custom trailer and did an internet search for parts. etrailer was the cheapest overall that I could find. After placing my order, it arrived in only two days. Amazing!
by:
Mike
11/02/2020
These worked great for my sledbed 4 place trailer
Replaced all 4 & bought 1 spare
Replaced all 4 & bought 1 spare
by:
Eric
12/23/2018
2002
Toyota
Tundra
Very happy with these hubs. Perfect fit. Arrived right on time and exactly as described. Really appreciate all the info on the website as well! Will definitely purchase from etrailer.com again.
by:
Doris J.
02/19/2016
There is only one word to describe the service I received from etrailer.com.......FANTASTIC....
by:
Michael
12/09/2017
Melissa W. Was very polite and very knowledgeable of the part that I needed. She was very helpful got my part right to me very quickly. All sales representative should be like Melissa. Will do business again as long as Melissa takes care of me a 5 star experience. Thank you. The part was priced fairly. The right parts delivered quickly job well done Thanks Melissa your The best
Michael
12/9/2018
Great
by:
Michael
05/02/2023
Good but didnt come with axel nuts.
by:
Phil
01/25/2013
Great product and does the job well. Shipping was quick, well packed and received in good condition with no damage.
by:
Dom Gio
07/09/2014
Just as advertised. High quality. Will use etrailer again.
by:
Dan H.
05/12/2014
Fast shipping and great product.
by:
Rick C.
05/05/2015
2004
Isuzu
Rodeo
Received package on time and it nstalled the new hub on my trailer in less than 30 minutes. I am very pleased with the fit and quality.
by:
Philip
02/13/2013
Received item(s) in good shape and on time. Installation was easy and as expected.
by:
Darrell
01/14/2022
Good service. Parts fit and installed easily.
by:
Damon
03/16/2020
Dast shipping and great communication!
by:
Daniel
07/09/2024
I received hubs yesterday. Put them together and it was a match on my trailer. Haven't towed it very far yet, appears all is well.
25
921
true
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacement Hub and Bearings for 1989 Tracker Boat TrailerBased on the pictures you attached and the outer bearing measurement you provided, it appears that you have 1-1/16 inch spindle like the BTR EZ Lube Spindle # TRU44FR. This particular spindle is designed for 2,000 pound axles and will use the same inner and outer bearing. I have attached the spindle's dimensions so you can compare them to what you have in order to verify the replacement bearing sizes. I recommend using a digital caliper like # PTW80157, as the measurements will need to...
view full answer...
- Recommended Replacement for Dexter 8-259 Idler HubWe offer the correct replacement for you. If you have EZ-Lube spindles, use # 8-259-5UC1-EZ or # 8-259-5UC1 for standard spindles. The hub includes the L44649 inner and outer bearings, the L44610 inner and outer race, the 10-9 grease seal, the dust cap and lug nuts.
view full answer... - Replacement 8-259 Hub With 2,000 lb Capacity and 5 on 4-1/2 Bolt PatternIn order to find the correct hub for your trailer you will need to take the current hub off, take it apart and find the bearing numbers, which will be stamped on the bearings themselves. If you get back to me with that information I may be able to help you find the right hub.
view full answer...
- Replacement Bearing Kit for a Dexter 8-259 HubHey Drew, thanks for the part number. For a Dexter 8-259 hub like our item # 8-259-5UC1, you'll need the Bearing Kit item # BK1-150. This kit will replace one hubs inner and outer bearings, races, seal, washer, and cotter pin. I recommend filling the bearings with the LubriMatic LMX Industrial Strength Grease item # L11390 when you install them. What kind of trailer do you have? You can add this information, along with any other questions you have, where it says Reply to Jerred H.
view full answer... - Is there a Trailer Wheel that Fits a 4 on 3 Inch Bolt PatternFirst, let's make sure that you are measuring the bolt pattern correctly. I have included a link to an article showing how to measure for bolt pattern. On a wheel or hub that has an even number of studs or holes all you have to do is measure from the center of one hole or stud straight across the center of the wheel to the center of the one across from it. If that is how you are measuring and still come up with a 4 on 3 bolt pattern then we do not have a wheel that will fit. But you may...
view full answer... - Replacement Coupler, Bearings and Hubs for a Detail K2 Utility TrailerHey Steve, for your Detail K2 trailer you can use the Channel Tongue Trailer Coupler # CT-3002-Z for a replacement coupler. This coupler is rated for up to 3,500 lbs, has a Zinc finish, and has a bolt on install. For a bearing kit, it looks like it uses the Bearing Kit, L44649 Inner/Outer Bearings # BK1-150 and for hubs you'll wan to use the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-259-5UC1. Please feel free to let me know if there is anything else I can help you with!
view full answer... - Will Bearing Buddy Grease Caps Fit a Harbor Freight Trailer 62671 Folding Trailer?We don't have a kit for Harbor Freight trailers and their parts are very rarely compatible with standard trailer parts like we carry. We have however found there are times when the bearing buddies # BB2047 specifically has fit. We haven't confirmed a fit on that model yet, so you will need to measure the hub bore of the hubs on your trailer. If the hub bore is 2.047 then these will work for you. For a hub and bearings, you would need to pull the hub and look at the bearing numbers....
view full answer... - How to Find Hub For Karavan TrailerHello Keith, We don't have any way of knowing what hub is on a Karavan trailer, but I can help you determine the correct one. To find out, you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the diagram I added below. You will also need...
view full answer... - Replacement Hub and Bearing Kit For a Carry On Trailer With Dexter 8-259 Idler HubsIt sounds like you are looking for the Dexter 8-259 # 8-259-5UC1 hub. If you only need the internals it will use the Bearing Kit # BK1-150 for each hub. The bearing kit includes new bearings, races and a grease seal for 1 hub. I recommend filling the bearings with the Grease # L11390 when you install them.
view full answer... - Replacement Bearing Kit For a Dexter 8-259 Idler HubYour Dexter 8-259 # 8-259-5UC1 will use the Bearing Kit # BK1-150 for each hub. I recommend filling the bearings with the Grease # L11390 when you install them.
view full answer... - Troubleshooting Hub and Spindle Not Fitting Together after Replacing Spindle on a Utility TrailerIt sounds and looks to me like you have the wrong hub assembly for the spindle that is welded to the axle on your trailer. The photos you sent clearly show a 1-1/16 inch spindle similar to the BTR EZ Lube Spindle item # TRU44FR. This is a spindle for a 2,000 pound axle. The parts that you referenced are for a 3,500 pound axle and definitely will not work on a spindle designed for a 2,000 pound axle. In addition, the photo of the hub that you sent looks like a hub for a 3,500 pound axle,...
view full answer... - Replacement Hubs for 2,000 lb Dexter Torflex AxleThanks for the info, and since you know you have a 2,000 lb #9 Dexter Torflex axle, we can get you the right replacement hub because we know those use inner and outer bearings # L44649. So the correct replacement hub for your application is the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2" Bolt Pattern # 8-259-5UC1. That is for standard spindles, so if you have the EZ-Lube spindle, what you will need is the Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axle...
view full answer... - How to Determine Correct Replacement Hub For Small TrailerOk, I can help you out here in regards to if you can get new hubs for larger wheels and tires for your small trailer, but hubs are quite specific fits for a trailer spindle, so it's going to take some measuring or knowing the hubs you have in order to determine if you can get a replacement or know if the 5-lug hubs you mentioned are the same as your 5-lug hubs. To determine if there is a replacement hub available, there's a number of things you will need to know. First, you need to know...
view full answer...
- How To Measure An Axle To Determine The Correct ReplacementAll of our axles are measures across from hub-face to hub-face. I have attached a diagram below showing where we measure the axle from. The diagram shows the Trailer Idler Axle Beam # e78GR. We will look at the hub-face length and the distance between the spring seats when determining fitment of an axle. If you are replacing an old axle we would want to try to get you an identical replacement. It is also good to know the weight capacity of the old axle.
view full answer...
- Replacing Trailer Hubs on Loadrite TrailerFrom the dimensions you gave me, the Trailer Hub Assembly for 2000 lb Axle, 5 on 4-1/2 should fit. It has a 6-1/2 inch diameter hub flange. I measured the depth, and it is 4-1/4 inches (2 inches on each side of the flange, and the flange itself is 1/4 inch thick). If you take a look at your bearings, they should have a number stamped on them. This is the easiest way to match up a replacement hub. The hub I am suggesting fits L44649 bearings.
view full answer... - What Size Hub will Work with the 215/60-8 Trailer Tire with 8 Inch Galvanized Wheel Load Range DThe proper size hub for the 215/60-8 bias trailer tire and wheel, # AM3H325, is going to depend on the weight capacity of the trailer you are designing. This wheel and tire combination is capable of 1,165 lbs at 70 psi, so each axle in your design would need to be rated for 2,330 lbs or less. Most likely if this is the proper capacity for your design you will be using a 2,000 lb axle and the Trailer Hub Assembly, # 34822545BX, would be the proper choice if the spindle on the axle you...
view full answer... - How to Determine the Bolt Hole Pattern on a Trailer WheelThe Trailer Hub Assembly, # 8-259-5UC1, has a 5 on 4-1/2 bolt pattern. To determine the bolt pattern of your trailer wheels, there is a simple way to measure. If there is an EVEN number of lugs, you will measure center to center on lugs directly across from each other. For example, if the wheel has 6 lugs and the center to center distance between 2 that are across from each other is 5-1/2 inches, then the bolt patter is 6 on 5-1/2. If there is an ODD number of lugs, you will measure...
view full answer... - Replacement Dexter Trailer Axles Marked 8-259The hub you have is the part # 8-259-5UC1 which is what you'd need for a replacement. This comes with all of the needed bearings, seals, and cap as well.
view full answer... - Where To Find Numbers For Replacement Bearings On Utility TrailerSince the axle you have is a Dexter Model 8259 you can choose one of the hub assemblies we offer from the attached product page. If you have an EZ-Lube axle on your trailer you may want to check out part # 8-259-5UC1-EZ, or part # 8-259-50UC1-EZ. If you do not have an EZ-Lube axle take a look at part # 8-259-5UC1 or part # 8-259-50UC1. I have attached links to some product review videos for these kits you can take a look at.
view full answer...
- Trailer Hub To Spindle Combinations for 2000 Pound or 3500 Pound AxleThe HUB KIT # 8-259-5UC1, uses a 1,000 pound spindle, item # TRU44FR. This setup is for a 2,000 pound axle. The #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter, item # TRU64FR, is for a 3500 pound axle. If you need a hub and spindle for a 3,500 pound axle then you would use the # TRU64FR spindle and the Trailer Hub Assembly for 3,500 lbs Axles with 5 on 4-1/2 bolt pattern, item # 84545BX.
view full answer... - Recommended Replacement Idler Hub Assembly That Uses L44649 Bearings Art, the Dexter Trailer Idler Hub Assembly # 8-258-5UC1-EZ is not going to work with your L44649 bearings, unfortunately. Instead, you're going to want to use the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-259-5UC1 instead. This idler hub will work with your L44649 bearings, has a 5 on 4 1/2" bolt pattern, and will also work with 2,000 lb axles.
view full answer... - Availability of Trailer Hub with 5 on 5 inch Bolt PatternThe only trailer hubs out there that have a 5 on 5 inch bolt pattern are for 3,500 lb trailer axles like the idler hub part # 84550BX.
view full answer... - Trailer Hub Replacement for 2017 Karavan Boat Trailer with Bearings L44649Based on your bearing numbers, seal dimensions, and wheel bolt pattern, the correct hub you'd need is the part # 8-259-5UC1.
view full answer... - Trailer Hub Recommendation for a Trailer that has Inner/Outer Bearing L44649 If the bearings of your current hub are both L44649 the Dexter Hub part # 8-259-5UC1 that you referenced will fit on your current trailer spindle. Since this has the same bolt pattern as your wheels it would match up with them as well. The star shape of this hub will not matter in comparison to the round style you currently have.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
DeAnne T
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Installed by:
Patrick B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Troy L.
11/13/2017
works great after one year of moderate to heavy use. No complaints!