bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Hopkins
  3. 4 Flat
  4. No Tow Package
  5. Trailer Hitch Wiring
  6. Vehicle End Connector
THIS ITEM IS NOT A FIT FOR
2007 Nissan Pathfinder
Hopkins

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Part Number: HM41115
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$25.59
Retail:$39.98
You Save: 36%
Custom Fit Vehicle Wiring
Not Confirmed to Fit

2007 Nissan Pathfinder

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. 1-800-940-8924 to order Hopkins custom fit vehicle wiring part number HM41115 or order online at etrailer.com. Free expert support on all Hopkins products. Great prices and Fastest Shipping for Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (49)
  • Q & A (0)
  • Photos

Hopkins Custom Fit Vehicle Wiring - HM41115

Highlights

  • Custom Fit: Designed for easy installation with no cutting or splicing required.
  • Plug-In Simplicity: T-connector plugs directly into existing wiring for quick setup.
  • Corrosion Resistance: Protective connection terminals with a dust cap to prevent wear.
  • Flat 4-Pole Connector: Powers trailer signals, compatible with 5, 6, and 7-pole adapters.
  • Fits Various Models: Works perfectly with older models like 1996 Chevy S10.
  • Effortless Installation: Takes less than 5 minutes to install and works instantly.

Features to know about

Hassle-Free Installation: Plug-In Simple T-Connector

Forget about tedious wiring tasks; this Hopkins Plug-In Simple Vehicle Wiring Harness with a 4-Pole Flat Trailer Connector makes installation a breeze. With its custom-fit design, you can directly plug into your existing wiring harness located behind the rear bumper. There’s no need to cut or splice wires, saving you time and effort while ensuring a seamless and secure connection.

All-Weather Performance: Protective Connection Terminals

Say goodbye to corroded connections! The protective terminals on this wiring harness resists harsh weather conditions, ensuring consistent performance every journey. Equipped with a dust cap and a packet of terminal grease, you can easily keep connections clean and corrosion-free for added longevity and reliability.

Universal Compatibility: Adaptable Connector Design

Whether you’ve got a new trailer or an older model, this harness can handle it. It features a 4-way flat trailer connector that’s compatible with 5-pole, 6-pole, and even 7-pole adapters. So, no matter what type of trailer you're dealing with, adapting is easy.

Secure and Streamlined: Custom Fit Behind Rear Bumper

With its custom-fit design, this wiring harness remains discreetly stowed beneath your vehicle near the trailer hitch once installed. For extra security and a clean look, a mounting bracket is recommended to keep the connector safely tucked away from potential hazards on the road.

Cost-Effective Solution: Economical and High-Quality

Why pay more for complex wiring solutions when you can have this efficient and affordable option? Installing this harness involves minimal costs, saving you money that can be better spent on other travel essentials without compromising on quality and performance.

Performance Assured: Tough Against Elements and Time

Even after prolonged exposure to elements like salt and water, this harness stands the test of time without losing its functionality. Trusted by users who value time-tested performance, it's all about plug and play, ensuring you're ready to hit the road with peace of mind.

41115 Plug-in Simple Hopkins T-Connector with 4-Pole Trailer Connector

Installation Details HM41115 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

49 reviews
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.

by:
1988 Chevrolet Blazer

Easy to install



by:

factory correct thanks



by:

This wiring harness took me less than 5 minutes to install! It does everything I need it to do and a year later it's still working just like the day I installed it.



by:
1995 Chevrolet S-10 Pickup

perfect trailer wiring harness for my 1995 chevy s10
but dont get the cheep shipping pay extra so you dont have to watch it go to 5 states before it gets to you

Dawn profile picture

Dawn

6/14/2019

Fantastic works perfect



by:

This is exactly what I like to see; $30 savings off the identical competitors, delivered right to the door, installs in minutes and everything works first time. I had one butt splice to tie in the ground as I had the competitors product prior to this and when I removed it I left a tail for the new one. (age eventually got to the competitors product.)

Snowmanxt profile picture

Snowmanxt

8/4/2018

Still Like New.



by:
Chevrolet

I was very pleased with both the quality of this product and how well it plugged into to existing wiring on my 1996 Chevy S10. Included in the package was everything I needed to add a plug in for my trailer lights without any cutting or splicing.
Also this product was less expensive than similar kits (that do require cutting and splicing)at big box stores. Hey



by:
1994 Chevrolet S-10 Pickup

Great piece of equipment. Very easy to install. Just plug and play.

Michael profile picture

Michael

1/23/2023

I use this harness weekly and I have been very impressed. Have not had the first problem. Great plug and play product.



by:

It was exactly what i ordered delivered in a decent amount of time. Will shop here again if i have the need for these type of sevices



by:

Speedy Shipping, great customer service to point me in the right direction



by:
1989 Chevrolet C/K Series Pickup

Worked as expected



by:

High quality product. Worked just as described. Very fast service / delivery of the parts.



by:

easy to use website for ordering, fast delivery, fits and works perfect



by:

Excellent product, just plug and play..great quality!



by:

This fit my application and worked very well



by:

Everything was a perfect fit!!



by:

One year on and still working correctly. Exposed to salt water.



by:
1996 Chevrolet S-10 Pickup

Easy to install and works flawlessly !
Great
product.



by:
1994 GMC Sonoma

Replacing a old plug that has not been used in years. Just trying to avoid any bad connections because of age. Just plug in no muss no fuss.



by:

It was very easy to install and works p erfectly



by:

This harness worked perfectly Wed sight easy to use.



by:

Was very satisfied and look forward to more business with uall



by:

perfect fit



by:
1996 Chevrolet S-10 Pickup

Did a good job! Product got here qu ick!



by:

Simple and effective. I also like that no wires are damaged.



by:

It worked great plunged right in


25
49
Show More Reviews

See what our Experts say about this Hopkins Custom Fit Vehicle Wiring

  • Recommended Class III Trailer Hitch for a 1992 Chevy S-10 Tahoe
    I recommend using the Curt Class III Trailer Hitch Receiver # C13021 for your 1992 Chevy S-10 with the factory step bumper because it features a hidden crosstube and an extended receiver to make it more easily accessible for attaching a ball mount or accessory. No modification is necessary but you will need to temporarily remove your bumper/fascia to install this. If you let me know what you plan on using this trailer hitch for I can make additional recommendations for you.
    view full answer...
    Image 1 for
  • What is the Mounting Bolt Pattern of the etrailer Electric Trailer Jack?
    Hey Jimmy, welcome back! The etrailer Electric Trailer Jack item # e55ZV has the standard A-frame jack mounting bolt pattern of 3" on center. The mounting bracket has slotted holes so there's some wiggle room too. The outer tube diameter is 2-1/4". The etrailer item # e55ZV has a 5,000 lbs capacity and provides an 18" lift. The jack includes LED lights, a cover to keep it protected, and also comes with a limited lifetime warranty. In the event your trailer battery is dead there is an...
    view full answer...
  • Where Is The Hopkins Plug-In Simple Vehicle Wiring Harness HM41115 Manufactured?
    Hey Dan. The Hopkins Plug-In Simple Vehicle Wiring Harness # HM41115 is made in China. If you are choosing between this and the Curt # C55312 for your Chevy S-10, the Curt will by far be the better more durable option. I try to avoid Hopkins wiring products if at all possible. They are just not known for being the best quality.
    view full answer...
  • Trailer Hitch Recommendation for a 1987 Chevy C/K 1500 With a Deep Drop Bumper
    A deep drop bumper is a bumper that hangs further below the frame than a standard bumper. Check out the photo that I attached showing a deep drop bumper compared to a standard bumper and a step bumper. We have three frame mount trailer hitches that will work with a deep drop bumper on your 1987 Chevrolet C/K 1500. You could install the Curt Hitch, # C13099 or the Draw-Tite Hitch, # 41504. These are all Class III trailer hitches that have a towing capacity of 5,000 lbs and a tongue weight...
    view full answer...
    Image 1 for
  • Will the Curt Hitch Part # C14082 Work with the Spare Tire on a 1986 Chevrolet C/K Series Pickup
    I spoke to my contact at Curt about the Curt Trailer Hitch Receiver part # C14082 for your 1986 Chevrolet C/K Series Pickup and they informed me that as long as the spare tire is of the stock tire size then it will work with the hitch installed. If you are looking to tow a trailer you will also need a wiring harness and ball mount/hitch ball if you do not already have them. For a wiring harness that will give you a 4-way trailer connector at the rear of your truck, I recommend using the...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Harness for 1997 Chevy S-10 Sportside With Non-Towing Bumper
    Thank you for the photo; it looks like your 1997 Chevy S-10 is the Sportside with non-towing bumper and the trailer hitch that fits is the Draw-Tite # 75085. This is a Class III hitch that is a complete bolt-on installation so no drilling into your truck's frame is going to be required. As for wiring to give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # HM41115. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches...
    view full answer...
    Image 1 for
  • Highest Capacity Trailer Hitch for a 1986 Chevy K30 Cab and Chassis Truck
    For a cab and chassis style 1986 Chevy K30 the highest capacity hitch would be # 41947 that you have referenced from Draw-Tite. Because the truck now has an 8 foot bed on it and another hitch, I cannot guarantee that it will fit. You will need to take a look at the instructions I have linked to determine if the attachment points required are free. If you can use the hitch I recommend the etrailer ball mount # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin with clip, and a...
    view full answer...
  • Recommended Trailer Hitch for 1997 Chevy S10 ZR2 Pickup
    For your 1997 Chevrolet S-10 Pickup ZR2 model, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75051. This Class III hitch is confirmed to fit your truck and will use existing holes in the frame for a no-drill installation. It features a 3,500 pound towing weight capacity and a 350 pound tongue weight capacity. The complete hardware kit is included. I have attached the written installation instructions that you can also take a look at. If you are looking to do some towing...
    view full answer...
  • What is a Roll Ban Bumper when Looking at Trailer Hitch Fits for a 1989 Chevy S-10
    If you take a look at the picture I have included the truck in it has a type of roll pan bumper. Essentially it is a bumper that matches the contours of the vehicle instead of protruding out like a regular step bumper. If your 1989 Chevy S-10 has a regular bumper then you can use Curt hitch # C13021. If it has a roll pan bumper then use # 13920. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
    view full answer...
    Image 1 for
  • Trailer Hitch for a 1996 Chevy S-10 with Roll Pan Bumper
    We do have a trailer hitch for your 1996 Chevy S-10 with the roll pan bumper. it is Curt hitch # 13920. I have included a link to the installation instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit...
    view full answer...
  • Recommended Brake Controller And 7-Way Wiring For 1984 And 1985 Chevy C10 Trucks
    For both your 1984 and 1985 Chevy C10 trucks, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195. If you will not be using the vehicles at the same time, you can use one controller and just add the second harness # 20127 and bracket # 2178. You can then use the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 on each vehicle to get your 7-way connection and wiring. This kit will...
    view full answer...
    Image 1 for
  • Parts Needed for Brake Controller Installation on a 1990 Chevy 1500 and 2003 Chevy Silverado 1500
    You can certainly use the Activator IV Brake Controller, # 5504, on both your 1990 Chevy and the 2003 model. For the 1990, you will need the brake controller, 4-Way wiring harness # HM41115 (unless the truck already has it), and a 4 and 7 Way Installation Kit, # ETBC7. You will first install the 4-Way wiring harness. I have included a link to the installation instructions for you to view. You will then install the ETBC7. I have included a link to an FAQ article and video that explain the...
    view full answer...
  • Trailer Hitch Fit for Short Bed 1986 Chevy C/K Series Truck
    So long as you have the standard or step bumper on your 1986 Chevy C/K Series Pickup with a 6 foot bed then yes, the Curt Trailer Hitch # 13028 will fit. This is a Class III hitch with a 2" receiver that has a solid 6,000 lb towing capacity and 600 lb tongue weight capacity. It is extremely sturdy with its steel construction and even comes with a lifetime warranty. I have added a link to the installation instructions for you to check out which details how it will fit on your truck. If...
    view full answer...
  • Parts Needed to Install a Brake Controller on a 1996 Chevy S-10
    The plug under the dash you see is likely the OBDII port and you are correct, it is not used to install a brake controller. On your 1996 Chevy S-10 you will need to hardwire in a brake controller. To do this you will need to start by installing a trailer connector (unless the truck already has one). To start you would install a 4-Way, # HM41115. If the truck already has a 4-Way you can skip this step. Next you will need 4 and 7-Way installation kit # ETBC7. This provides the 7-Way and...
    view full answer...
  • Trailer Hitch Recommendation for a 1987 GMC 1500 Pick Up Truck
    The Draw-Tite Class III Trailer Hitch, # 75034, will fit your 1987 GMC 1500 as long as it does not have a deep drop bumper. If your truck has an 8 ft bed and a deep drop bumper, then you will instead need the Draw-Tite Trailer Hitch, # 41504. I have attached a photo of a typical deep drop bumper if you are not familiar with them. If your truck has a 6 ft bed, then you will need additional hardware to complete the installation. You will need six 3/8 inch spacer blocks, # 01077-011, and...
    view full answer...
    Image 1 for
  • Recommended Brake Controller And Wiring For 1986 GMC 3500 Dump Truck
    For your 1986 GMC 3500 dump truck, I recommend the Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional # TK90160. This brake controller will apply trailer brakes at the same time and with the same intensity as you hit the brakes in your truck. It has a digital display and 3 levels of boost preset for braking strength. This controller will need to be hardwired as there is not a wiring harness present in your truck. I recommend the Draw-Tite Wiring Kit for Electric...
    view full answer...
  • Trailer Hitch for a 1989 Chevy R3500 Dually Crew Cab with 8 Foot Bed a 34 Inch Frame Width
    If your 1989 Chevy truck is a cab and chassis model (these are the ones that come without beds that are then turned into service vehicles, flat beds, and that sort of thing) then hitch # 41947 will fit for sure. But apparently, for 1989, Chevy trucks with a long bed and crew cab had a 34 inch frame width. So in this generation of GM trucks there are some pickup models that have the 34 inch frame. I also recommend etrailer ball mount kit # EBMK2416 which comes with a ball mount with a 3...
    view full answer...
  • Hitch Fit for 1987 Chevy S-10 With Factory Step Bumper
    Curt hitch # C13132 is a confirmed fit for your 1987 Chevy S-10 with a factory step bumper and it will not require you to drill any holes; the hitch simply bolts on. There will be no issues as far as the spare tire is concerned, it will be able to stay mounted underneath the truck. The recommended wiring to add a 4-flat connector to your '87 S-10 is # HM41115.
    view full answer...
  • Does a Brake Controller Have to be Hardwired in 1991 Chevy C/K Truck
    Yes, a brake controller will need to be hardwired into a 1991 Chevy C/K Series truck, though the installation is not something overly difficult. To install the brake controller I recommend for your truck, the Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90885 you will need the Brake Control Plug-In Harness # 20127, which plugs into the Prodigy and has four wires, a black power wire, white ground wire, blue brake wire and red stop light switch wire. If...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 1991 GMC Sierra Stepside
    For your 1991 GMC Sierra Stepside, I recommend taking a look at the Curt Class IV Receiver Hitch # C14081. This hitch is confirmed to fit your truck and will use existing holes in its frame for a no-drill installation. Just note that the spare tire will need to be lowered or removed temporarily when mounting the trailer hitch. This particular hitch features a 2 inch receiver opening and a towing weight capacity of 10,000 pounds. I highly recommend checking the owner's manual for your truck...
    view full answer...
  • How to Wire Curt 4-Pole Wiring Harness # C55411 in a 1996 Chevrolet S10 Pickup
    The particular 4-pole trailer wiring harness you reviewed, Curt # C55411, is a hard wire type intended to splice into your vehicle wiring to transfer brake, tail and turn light signals from your tow vehicle to your 4-pole-equipped trailer. This particular part is not specified for your vehicle but it will work provided that it is long enough to reach from the connection point to the rear bumper. Installation instructions for part # C55411 are provided for reference. The link provided will...
    view full answer...
  • Hitch Recommendation for a 1989 Chevy S-10
    I have a solution for you, but the The Draw Tite Hitch part # 75129 that you referenced has been confirmed as a fit for the full-size 1989 Chevy Blazer so it would not fit your S-10. Instead you would want the Curt Hitch part # 13083. It will install in the holes that are drilling already in the rear frame of your vehicle. The trailer wiring kit you would want is the Hopkins harness part # HM41115. This will be very easy to install and would work great. Check out the install video I...
    view full answer...
  • Can a 4 Pole to 7-way Adapter Be Used to Tow a Trailer With Brakes
    Danny, yes, a 4 pole to 7 way adapter like the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector # 30717 will work fine with electric brakes since the blue brake output wire would get hooked up.
    view full answer...
  • Trailer Hitch Receiver Compatible With 1992 GMC Sonoma Short Bed
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13132 will fit your 1992 GMC Sonoma truck as long as you have a factory step bumper. It will require temporary removal of the rear bumper during installation. It is not a fit for a roll pan bumper. If you have a roll pan bumper, you will need to use the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13920. This will require a relocation of the spare tire in short bed models as well as cutting the rollpan...
    view full answer...


< Previous
12



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Cole B
Installed by:
Cole B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<