See what our Experts say about this Lippert RV Slide Out Parts

• Replacement Components For A Schwintek Slide Out System
  Hey James, We don't currently offer much for Schwintek systems, but I'd be happy to get the part added if you can give me a bit more information on your current system. Are you referring to the torque shaft that connects to the motor or the H-column that the gear racks connect to?
  view full answer...
  
• Can I get Replacement Parts for Lippert Motor LC295380
  Hey, Chris. After doing some research and checking with Lippert, It looks like the only replacement part they have for the Venture Actuator and High Speed Slide-Out Motor, part # LC168956 is the motor itself, part # LC295380. In my searching It looks like quite a number of people have been asking for replacement parts without a whole replacement but were told the same thing Lippert told me.
  view full answer...
• Replacement Slideout Motor for a 2016 Grand Design Reflection 337RLS w/a Schwintek System
  Hey Lester. The 2016 Grand Design Reflection 337RLS uses a Schwintek system. The motor should be located at the top of the vertical column on either side of the slide-out, which is accessible from the outside. You'll need to pull back the rubber T-molding or exterior wiper seal. To replace just the motor, you'll need the Replacement 18:1 High Speed Motor Assembly item # LC295380. If you need the actuator and the motor, you'll need item # LC168956. What kind of issues are you having with...
  view full answer...
• Actuator and Motor Assembly for Venture Slide-Out
  There is no database of trailer-specific parts available so you will need to know the manufacturer and model of your slide-out, which you may be able to find in our owner's manual; do you know if it is a Lippert Components Through-Frame Slide-Out?
  view full answer...
• Looking For Replacement For 131903 On A 2019 Rockwood Signature Ultra Light model 8329SS
  Hello Rhonda, thanks for reaching out. The 131903 Tucson motor has been discontinued. It was replaced with the Lippert Venture Actuator and High Speed Slide-Out Motor # LC168956, so this is what I recommend for replacing it. This is going to replace both the motor and actuator. This motor can pull up to 30 amps DC so I recommend installing an in-line 30 amp fuse holder to cut the power if there is a surge to prevent the motor from burning up.
  view full answer...
• Replacement for Lippert Slide Out Motor 131903
  We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item # LC168956 or the Replacement 18:1 High Speed Motor Assembly item # LC295380 for just the motor. It has a RPM rating of 9,100 and a gear ratio of 18:1.
  view full answer...
• Replacement for Lippert Slide-Out Motor on 2016 Grand Design Reflection 337RLS
  Hey Pepper! We have the motor you need but it is not the # TUS24FR. The # LC168956 you referenced is the Lippert Venture Actuator and High Speed Slide-Out Motor. Since you just need the motor the correct replacement part is the # LC295380. If you have any other questions don't hesitate to reach out in the comments below.
  view full answer...
• Recommended Replacement Slide Out Parts for 2005 Keystone Sprinter 30 Foot
  For your 2005 Keystone Sprinter, the missing components for your slide outs can be replaced with the Lippert Components Venture Actuator and High Speed Slide-Out Motor # LC168956 for each slide. This will give you the electric motor, gearing, and actuator to make each system work. If you already have the actuator and just want to replace the motor and gearbox, then I recommend the Lippert Components RV Slide-Out Motor by Klauber # LC130057.
  view full answer...
• Solution for Needing Replacement Slide Out Motor # 8532-18HT
  Just the motor for what you have is not available. But we have the motor with the actuator as the Lippert Components Venture Actuator and High Speed Slide-Out Motor Item # LC168956. This is the same 9,500 RPM motor you have.
  view full answer...
  
• Dimensions of Lippert Components Venture Actuator and High Speed Slide-Out Motor # LC168956
  The outside diameter of the outer tube of the Lippert Components Venture Actuator and High Speed Slide-Out Motor # LC168956 that you referenced is 2 inches. I confirmed this with Lippert and attached a dimensional picture of this for you to check out as well.
  view full answer...
  
• How To Determine Correct Slide Actuator Stroke Length For Frame Slide Out Systems
  There is no way for me to tell if Item # LC145595 is compatible with your 2019 Gulfstream Amerilite 268BH just by the manufacturer name. The best way to determine what stoke length you need is to look at the very end of your current cylinder. There should be a two digit number etched in the metal. This number will be the stroke you have and would need to get the correct replacement.
  view full answer...
• Replacement for Lippert Slide Out Motor 131903
  Hey Jerry, great question! Yes, if you found another slide out that is rated for only 5,000 RPM then you'll be cutting the movement of the slide just about in half. The Lippert Venture Actuator and High Speed Slide-Out Motor # LC168956 that Lippert has directed us to is rated for 9,500 RPM so your slide movement will increase a little with this option.
  view full answer...
• Length of Lippert Venture Actuator and High Speed Slide-Out Motor # LC168956
  The Lippert Components Venture Actuator # LC168956 referenced in your question features a length of 50-1/2 inches from the top of the gearbox down to the collar on the actuator. I contacted Lippert but they were unable to provide the extended and retracted lengths. This particular kit can be used on LCI Electric Through-Frame Slide-Outs 12VDC.
  view full answer...
  
• Recommended Replacement For A Tuscon 131903 Slide Out Motor
  I spoke with Lippert and they confirmed that the 131903 Tucson motor that you originally had was discontinued and instead replaced with the Lippert Venture Actuator and High Speed Slide-Out Motor # LC168956. This is going to replace both the motor and actuator. This motor can pull up to 30 amps DC so I recommend installing an in-line 30 amp fuse holder to cut the power if there is a surge to prevent the motor from burning up like your previous one.
  view full answer...
• Does the Lippert Venture Actuator and Slide-Out Motor Need to Be Lubricated for Maintenance?
  Nope, there is no need to lubricate the Lippert Venture Actuator and High Speed Slide-Out Motor # LC168956 for maintenance. According to Lippert you cannot lubricate the internal shaft of the actuator as it is a sealed unit.
  view full answer...
• What Size Bolt Holds Motor to Lippert Components Venture Actuator and High Speed Slide-Out Motor
  I checked with Lippert and they informed me that the bolt size that holds the motor to the actuator of the Venture Actuator and Slide Out Motor # LC168596 is 5/16" x 3/4" self threading Grade 5.
  view full answer...
• Replacement Slideout Actuator and Motor for 2004 Keystone Montana Mountaineer 310 TBS
  The Lippert Components 18:1 Venture Actuator Slide-Out Motor # LC132682 is the correct replacement for your 2004 Keystone Montana Mountaineer 310 TBS. If you want the faster operation, the Lippert Components Venture Actuator and High Speed Slide-Out Motor # LC168956 will get the job done faster.
  view full answer...
• Does Lippert Components Venture High Speed Slide-Out Motor # LC168956 Require Limit Switch
  I spoke with my contact at Lippert and this is what they sent back to me: # LC168956 uses an internal clutch in the gearbox that engages when the slide meets resistance to stop it from going out any farther. There isn't a limit switch that the system uses or that we provide, but a savvy mechanic may be able to install one he might find at an auto parts shop, though we would not be able to assist with it. The short version is that you wouldn't need a limit switch.
  view full answer...
• Does Lippert Components Venture Actuator and High Speed Slide-Out Motor Have Set Speed
  I reached out to the manufacturer who told me there is not a set amount of time or speed to extend the slide-out with the Lippert Components Venture Actuator and High Speed Slide-Out Motor # LC168956. The reason for this are the variables with different slide-outs; each is different so the amount of time will be different for everybody depending both on the size of the room and how much specific weight is in the room.
  view full answer...
• Is There A Weight Capacity And Speed Rating For The Lippert Venture Actuator and Slide-Out Motor
  There isn't a specific weight capacity associated with the # LC168956 but the it does have a 9,500 RPM rating for the speed. Each of these motors have specific replacements so I recommend checking your current motor for any tags or stickers that could be used to identify exactly what you have and find the correct replacement.
  view full answer...
• Replacement Motor for 8532-18HT On 2022 Rockwood Ultra Lite 2608BS
  Hey Tommy! The replacement for your 8532-18HT is the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380. We have the motor with the actuator as well, which is the # LC168956. We do have these in stock, and the price is listed at the top of this page on the parts. Once you go through the checkout process you will be able to have an idea on estimated arrival based on where you live. Any big trips coming up with the Rockwood once...
  view full answer...

Do you have a question about this RV Slide Out Part?