See what our Experts say about this Rhino Rack Roof Rack

• Higher Weight Capacity Ladder Rack that Fits 2019 Ford F-250
  Since your plan is to install the Retrax PowerTrax Pro XR # RTT-80384 if you have a long bed or # RTT-80383 for if you have a short bed all you'd need to install a Yakima OverHaul HD part # Y01151-58 ladder rack which has a 500 lb capacity would be the adapter # Y01155 and that would be covered. Now if you do need more weight capacity the TracRac sliding ladder racks like the # TH43003XT-785 for short bed or # TH43003XT-000 for a long bed and these do have a weight capacity of 1,250 lbs....
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Roof Rack Recommendation for 2019 Hyundai Elantra and iKamper
  For a 2019 Hyundai Elantra with a naked roof, I suggest the Thule SquareBar Evo Crossbars, 53" Long, # TH712400. These will mount to a GT model with or without a glass roof using using the Evo clamp feet, # TH710501 and the fit kit, # TH145112. Or, if you have a sedan, use the Evo clamp feet, # TH710501 and the fit kit, # TH145069. These crossbars have a weight capacity of 220 lbs. The weight a roof rack can support is also limited by the roof capacity for the vehicle, this is outlined...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Roof Rack Recommendation For 2005 Scion xB
  I understand how it can be a bit confusing so I will do what I can to help out. We do offer several different roof racks that are designed to fit your 2005 Scion xB. The main differences you will find are due to the design of the crossbars. Square crossbars can be quite a lot noisier than some of the more aerodynamic crossbars we offer. For a nice roof rack for your vehicle, I recommend the Rhino-Rack RS 2500 Roof Rack for Naked Roofs, part # RRRS434B. This system has aerodynamic aluminum...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Would Two Sets of Rhino Rack Heavy Duty Bars Double Roof Rack Capacity
  You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like the part # RTC16, four sets of the feet part # RLT500, and two sets of the 65 inch Rhino Rack bars part # RB1650B-2.
  view full answer...
• Roof Rack / Crossbar Options For 2020 Ford Escape With Or Without Existing Rails
  I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes...
  view full answer...
• 2017 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Rails
  Rhino Rack does offer roof racks that fit the low profile flush rails you have on the roof of your 2017 Hyundai Santa Fe Sport with the part numbers # RRVA137B-2 and # RRSX032 but the HD bar kit you mentioned would only fit the versions of your vehicle without the flush rails. This is an aero bar style rack too which means you'd have minimal wind noise as well as better fuel mileage. The sunroof you have won't be an issue for sure when it's closed, but Rhino Rack recommends checking for...
  view full answer...
• Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
  The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
  For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Recommended Roof Rack For A 2012 GMC Sierra W/ Extended Cab On A Naked Roof
  I do have a roof rack option that will fit your 2012 GMC Sierra Extended Cab. Unfortunately, it will not be a Thule Rack because the fit kit has been discontinued. I do have a Rhino-Rack alternative that has a maximum weight capacity of 130 lbs with their heavy duty crossbar. This rack will consist of the following items: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2, part # RB1375 Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
  For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Rhino Rack Roof Rack Fit for 2013 Ford Escape
  To install the Rhino Rack Heavy Duty Crossbars on your 2013 Ford Escape you will want to use crossbars # RB1375, leg kit # RRRLKHD, and custom clamps and pads # DK375. If you are interested in the Rhino Rack Aero Crossbars, use # RRVA137B-2, # RRRLKVA, and # DK375. I have attached an installation video of the Rhino Rack aero crossbars on a 2013 Ford Escape for you.
  view full answer...
• Roof Rack Mounted Fork Mount Bike Rack Recommendations for a 2016 Toyota Highlander
  A popular roof rack mounted bike rack, fork mount, that is very stable is the Rhino-Rack MountainTrail # RBC035. This carrier is also compatible with disc brakes, accommodates bike wheels up to 3" in diameter, and uses a 9mm skewer. I have linked a video review of this carrier for you. If your bike has a through-axle then I recommend the Yakima HighSpeed, # Y02115. It is designed to hold a bike with a 12-mm, 15-mm, or 20-mm thru-axle fork without an adapter. I have linked a video review...
  view full answer...
• Does the Rhino-Rack HD Crossbars # RB1375 Fit a 2021 Nissan Sentra?
  I have a great alternative for you. Unfortunately, the Rhino-Rack Heavy Duty Crossbars # RB1375 will not fit your 2021 Nissan Sentra. For heavy-duty bars that are confirmed to fit your 2021 Nissan Sentra with a bare roof, I recommend the following parts: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 -...
  view full answer...
• Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon Roof
  The Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
  view full answer...
• Roof Rack, Bike Rack, and Trailer Hitch Recommendations for a 2015 Ford Transit Connect
  You can add a roof rack to your 2015 Ford Transit Connect. If your van does not have the factory side rails then I recommend a Rhino-Rack roof rack using the following parts: Vortex bars # RRVA137B-2 Feet # RRRLKVA Fit kit # DK417 If you prefer the heavy duty rectangular bars then you would need bars # RB1375, legs # RRRLKHD, and fit kit # DK417. For any roof rack check the vehicle owner's manual or with Ford to determine the capacity of the van roof and go by whichever is lower. For...
  view full answer...
• Roof Rack Recommendation for a 2015 Hyundai Santa Fe Sport with Naked Roof
  The factory side rails on vehicles usually can't be installed on models that did not originally come with them but that would be a question best handled by a Hyundai dealer who will then probably steer you towards an aftermarket roof rack. So we can cut out the middle man and go right to an aftermarket roof rack. The addition of the clamps on a roof rack does not add any extra wind noise compare to models that don't have a clamp style roof rack. In fact, it is entirely possible, even likely,...
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
  Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
  We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
  view full answer...
  
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Kayak Carrier Recommendation for 2009 Ford F-150 With Factory Folding Tonneau Cover
  A ladder rack is one option for transporting your kayak on your F-150 that has the dealer-installed folding tonneau cover, but note there can sometimes be interference between the common mounting requirements for tonneau covers and ladder racks since both install on the bed rails. I can offer you a simple and very cost-effective option IF your tonneau cover can handle the weight of your kayak. We offer foam block carriers that are very inexpensive, simple to install and that weigh very...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Recommended Roof Rack and Cargo Carrier for 2013 Toyota Corolla
  For your 2013 Toyota Corolla, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2, the 2500 Series Legs # RRRLKVA, and the Custom DK Fit Kit # DK152. This is a confirmed fit for your vehicle. I also recommend the metal lock cores # RRVA-LEC4 for when you use the T-channel mounting for accessories that have that mount that fits in the slot on top of your crossbars instead of wrapping around them. Then for your rooftop cargo carrier, I recommend the Thule Force XT Rooftop Cargo...
  view full answer...
• Roof Rack, Bike Rack And Kayak Carrier Recommendations For 2008 Scion xB
  If your 2008 Scion xB has no rails or crossbars I recommend the Rhino-Rack Vortex roof rack system. This roof rack features the low profile aerodynamic aluminum crossbars with the rubberized Vortex strips in the channel that help disrupt the airflow for a quieter ride. To order this roof rack you will need part # RRVA137B-2, part # RRRLKVA, and part # DK152. If you prefer Black crossbars you can order part # RRVA137B-2. The bike rack I recommend for this roof rack is the SQR Quick-Release...
  view full answer...
  
• Roof Rack System For A 2010 Honda Civic Sedan
  To be able to find the proper mounting kit for your rails that you currently have I would need to know what brand of rails that they're. I would also need to know the usable bar length and what type of rack it is. If you have no idea what the brand of rails you currently have we can set you up with a new roof rack system! The Rhino Rack Vortex Aero Bars come with the parts below to give you the full roof rack for your 2010 Honda Civic. The Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 The...
  view full answer...
• Roof Rack Recommendation for 2010 Toyota Corolla S with Sunroof
  Yes, we have Thule and Rhino-Rack roof racks to fit your 2010 Toyota Corolla with a sunroof. I am including a link that shows the different styles of roof racks that we have available for your Corolla. A vehicle with a naked roof is one with no factory-installed side rails or crossbars. The roof is naked when it comes to a roof rack. My personal recommendation for a roof rack would be for the Rhino-Rack Roof Rack System with Vortex Aero Crossbars, # RRVA118B-2, # RRRLKVA, # DK152. The...
  view full answer...
• Roof Rack Recommendation for a 2015 Scion xB
  I would strongly recommend you not use a track roof rack system on your new 2015 Scion xB as that will require drilling through the roof which will obviously be a permanent modification that could potentially allow water to come in if not done perfectly and affect your ability to resell the vehicle in the future. Using a Rhino Rack Roof Rack that consists of part numbers # RRVA137B-2, # RRRLKVA, # RREB-FK1 and # DK152 would be a great route. This rack clamps to the door frames of your...
  view full answer...
• Trailer Hitch For 2011 Scion xB Release
  The Curt Trailer Hitch Receiver # C12490 is a custom fit for the 2011 Scion xB base model. The hitch fits this generation of the xB. The Release series center exhaust is on the 2010 model but we still don't list this as a confirmed fit because of the body kit on the 2011 Release. Your 2011 will mount the same way but you would need to modify your body kit by trimming to accommodate the receiver tube. If you're looking to carry a bike rack or cargo I would get a roof rack. This will be...
  view full answer...
• Leg and Clamp Kit to Install Rhino-Rack Vortex Crossbars on a 2011 Toyota Corolla
  The correct parts needed for you to install a Rhino Rack 2500 series Vortex Roof Rack on your 2011 Toyota Corolla with a naked roof would be: Rhino-Rack 2500 Series Roof Rack with Aero Crossbars # RRVA118B-2, # RRRLKVA Custom DK Clamps and Pads for Rhino-Rack 2500 Series Roof Rack System # DK152 Then for a fairing you would want the 38 inch Rhino Rack Fairing part # RRRF2
  view full answer...
• Will Rola Sport Roof Rack # 59759 for 2007 Honda Civic 4-Door Interfere with Sunroof Operation
  I reviewed the installation instructions for the Rola Sport Series Roof Rack 5975, and there is no specific mention of any fit issues on the 2007 Honda Civic 4-door equipped with a sunroof. (For your reference I have sent a copy of the instructions to you in a separate email.) My contact at Rola advises that there may be clearance issues between the sunroof and the front crossbar. Also, as with some roof racks from other brands, there may be fit issues between certain rack-mounted accessory...
  view full answer...
• Roof Rack Recommendation for 2009 Scion xB
  For your 2009 Scion xB the Rhino Rack roof rack part # RRVA137B-2, # RRRLKVA, and # DK152 is a confirmed fit that would work well. Quality wise this rivals Thule easily but the price is much lower. For what you listed this is the perfect rack. Then the rooftop Rhino Rack cargo bag part # RRLB500 would be a fantastic option too. This can carry up to 17.5 cubic feet of storate space. For a more compact option we have the # RRLB250 which can hold up to 8.5 feet of cubic space.
  view full answer...
• Recommended Mounting Hardware for SportRack Explorer Cargo Box
  Your SportRack Explorer Cargo Box is designed to attach to crossbars on a vehicle's roof rack system. I cannot recommend mounting the box to your vehicle in any other way. For a nice but economical roof rack that is confirmed to fit your 4-Door Honda Civic, I recommend the Rhino-Rack Euro Bar Roof Rack System. This system consists of # RRVA126B-2 for the two 50 inch Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK152 for the Custom DK Fit Kit. I have attached a short video demonstration...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for 2012 Toyota Corolla
  First you'll need a roof rack installed on your 2012 Toyota Corolla so that you can carry a canoe. For that we have the Rhino Rack part numbers # RRVA118B-2, # RRRLKVA, and # DK152 which is a confirmed fit and will be a great rack to mount a canoe carrier to like the Swagman Exo Aero part # S65145 would do a great job to carry the canoe. I attached a review video for this carrier for you to check out as well.
  view full answer...
• All Parts Needed to Add Roof Rack to 2013 Scion xB
  The part you mentioned is the fit kit for a Rhino-Rack roof rack on your 2013 Scion xB, and to complete the roof rack you'll need to add crossbars and the mounting feet, and the locks do come with it. Here is a list of the parts you'd need to add this rack to your Scion: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA - Custom DK Fit Kit # DK152 I have added a photo which shows the rack on a Scion xB.
  view full answer...
  
• How Do Roof Rack Accessories Attach To Rhino Rack 2500 Load Bars
  The Rhino-Rack 2500 Load Bars that you referenced do have t-slots for roof rack accessories to attach to. Check out the picture I attached to see the dimensions of the t-slots. You can also attach accessories around the load bars as well. The dimensions of the load bars are 3-1/2 inches wide and 1-1/2 inches tall. If your roof top accessories can install on load bars with those dimensions you would be good.
  view full answer...
  
• Rhino-Rack Vortex Aero Crossbar Compatibility with Thule and Yakima Roof Bike Carriers
  Yes, the T-Track hardware included on the Thule UpRide Roof Bike Rack # TH599000 will let you install it properly in the top channels of Rhino-Rack's Vortex roof crossbars. On your 2012 Scion xB you'll want to order and install Rhino-Rack parts # RRVA137B-2, # RRRLKVA and # DK152 to complete your roof rack. The Yakima FrontLoader # Y02103 and HighRoad # Y02114 bike carriers you referenced will also fit the roof rack but these will install by clamping around the bars. For the HighRoad you...
  view full answer...
• Recommended Roof Rack And Kayak Carrier For 2011 Toyota Corolla
  The Rhino-Rack Vortex Aero Crossbars - 46" # RRVA118B-2 would work well for carrying a kayak on your 2011 Toyota Corolla. You'll also need the corresponding Legs # RRRLKVA and Fit Kit # DK152. This will allow you to use the slide-open feature of the sunroof, but I cannot say with certainty if it will allow you to tilt open the sunroof or not as that could possibly cause some interference; Rhino-Rack was also not able to confirm compatibility with the tilt feature. You will want to add...
  view full answer...
• Roof Rack Recommendation for 2010 Toyota Corolla with Naked Roof for Snowboard Carrier
  For your 2010 Toyota Corolla sedan with a naked roof we have the 2010 Toyota Corolla Roof Rack by Rhino Rack which includes part numbers # RB1250B-2, # RRRLKHD and # DK152 as a confirmed fit which would work great for a snowboard rack like the Rhino Rack # RR574 which can carry up to 4 pairs of skis or 2 boards.
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for a 2010 Toyota Corolla
  First you will need a roof rack for your 2010 Toyota Corolla 4 door. For that you would want the Rhino Rack part # RRVA118B-2, # RRRLKVA, and # DK152. Then for a kayak carrier for each kayak you would want the Rhino Rack carrier part # S512 which would work great for you kayaks and with the roof rack I recommended.
  view full answer...
• Roof Rack and Cargo Box Recommendations for 2012 Toyota Corolla
  The Rhino Rack Vortex Aero crossbars you referenced that consists of the # RRVA118B-2 crossbars, the # RRRLKVA legs and # DK152 clamp kit would be an economical yet aerodynamic choice for you. If wind resistance is a concern, going with a cargo box would be the way to go. For the most part, a cargo bag takes the shape of whatever's packed in it, while the cargo box is pretty aerodynamic. Keep in mind that putting anything on the roof of your vehicle, no matter how aerodynamic, will increase...
  view full answer...
• Roof Rack Options for a 2017 GMC Yukon and 2010 Honda Civic
  I do have options for you but a custom fit roof rack for a 2017 GMC Yukon will not fit a 2010 Honda Civic. Instead, you will need to decide which vehicle you would prefer to have the roof rack on or purchase one for both vehicles. For your 2017 GMC Yukon, I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of part # RRVA150B-2, part # RRRCH4, and part # RRRCP43-BK. For your 2010 Honda Civic, I recommend using the Rhino-Rack Vortex Aero Crossbar System which is composed...
  view full answer...
• Recommended Roof Rack to Fit a 2011 Scion XB
  We carry a few different roof rack systems the will work on your 2011 Scion xB. I recommend the Rhino-Rack Vortex Aero Rack System, # RRVA137B-2 Vortex Aero Bars, # RRRLKVA 2500 Series Legs, and # DK152 Fit Kit. The Vortex crossbars are a more aerodynamic bar that will cut down on wind drag and noise. The bars are constructed of lightweight aluminum and provide a low-profile and sleek design. All the racks listed can carry up to two kayak. However, consulting your owner's manual to find...
  view full answer...
• Roof Rack Recommendation for a 2007 Honda Civic 4 Door
  The Rhino Rack roof rack part numbers # RRVA126B-2, # RRRLKVA and # DK152 has been confirmed to fit your 2007 Honda Civic 4 door and would work well for you. The thing about roof racks is they create a decent amount of wind noise so when you open your sunroof it will be pretty noisy most likely but aside from that it shouldn't affect anything else. Finally, yes with these two part numbers you will have everything needed to complete a roof rack on your vehicle.
  view full answer...
• Roof Rack and Stand Up Paddle Board Carrier Recommendation for a 2008 Honda Civic
  To carry 2 paddleboards with a carrier like the Thule SUP part # TH810001 you will first need a roof rack on your 2008 Honda Civic. If you have a 2 door Civic you would need the part # RRVA126B-2, # RRRLKVA and # DK153. If you have a 4 door you would need the part # RRVA126B-2, # RRRLKVA and # DK152. Either rack would work great with the Thule SUP
  view full answer...
• Can You Use Square Thule Crossbars On An Inno Roof Rack Installed On 2008 Scion xB?
  You will want to stick with one brand throughout the entire roof rack kit; various brands of roof racks are not made to be compatible and interchangeable with each other. The most economical roof rack for your 2008 Scion xB is Inno Square Crossbars - Steel - Black - 58" Long - Qty 2 # INB147 with Feet # INSUT and Fit Kit # INK300. This has a weight capacity of 120lbs.
  view full answer...
• Rhino-Rack Roof Rack Fit For 2007 Honda Civic Sedan
  Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK152 This will have all the parts needed and give you a rack with both crossbars so you can haul your gear.
  view full answer...

Do you have a question about this Roof Rack?