All Parts Needed to Add Roof Rack to 2013 Scion xB

Question

Question:

Does this mount kit comes with key lock and what type of bars do I need to match whit it?

asked by: Amaury T

0

Expert Reply:

The part you mentioned is the fit kit for a Rhino-Rack roof rack on your 2013 Scion xB, and to complete the roof rack you'll need to add crossbars and the mounting feet, and the locks do come with it. Here is a list of the parts you'd need to add this rack to your Scion:

- Rhino-Rack Vortex Aero Crossbars # RRVA137B-2
- Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA
- Custom DK Fit Kit # DK152

I have added a photo which shows the rack on a Scion xB.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Apart from how the rooftop bags mount there is little difference between the cargo bags that go on the naked roof of your 2013 Kia Soul or one that attaches to a roof rack. To avoid having to put a pricey roof rack on your Soul, I strongly recommend…

view full answer...

Answer 2

Easily the best option for a rooftop cargo bag that will attach directly to the roof rack on your Chevy Traverse is the Rightline Gear Sport 2 Rooftop Cargo Bag #RL100S20. This is the best value, and I really like it because of its value; it has a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 9

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 10

Hey Earl, thanks for the picture of your roof rack! Seeing that I can tell the bars sit low enough on the roof of your 2007 Toyota Sienna that the Rhino Rack Pioneer Platform part #RR87CP would be able to fit with the rack still installed. You will…

view full answer...

All Parts Needed to Add Roof Rack to 2013 Scion xB

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching