See what our Experts say about this Inno Roof Rack

• Can Leg on Rola Roof Rack be Replaced for 2006 Honda Civic
  We do have the following parts still listed as replacement parts for a Rola roof rack: Replacement Cage Nuts part # 59710 Replacement Wrenches part 38371 Replacement Rubber Buffer Strips part 59846 (discontinued) Replacement End Support Covers part # 59887 For your application though if that leg is damaged badly then we need to get you a different roof rack. When I reached out to my contact at Rola he said that part has been discontinued so there aren't any replacements for you. If your...
  view full answer...
  
• Where to Install Feet of Inno Roof Rack on a 2014 Toyota Prius v
  I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v: 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS200 Fit Kit - # INK870 For the front crossbar you will space the feet out at 20-1/2" and position the feet 2" in front of the door edge like you mentioned. For the rear crossbar you will space the feet out 20-3/4" and position the feet 25-1/2" back from the door edge. Attached is a snapshot of these specs out of the installation...
  view full answer...
  
• Inno Roof Rack Recommendation for 2008 Toyota Prius
  The Inno Aero Bar Roof Rack part # INXB108-2, # INXS200, and # INK705 is a great option for your 2008 Toyota Prius. It does come with locks and also the aero shaped bars help minimize wind noise. This rack does install using door clamps and the feet then rest on rubber pads on the roof of your vehicle. Over time these racks hold up just fine. I'd periodically remove the feet and clean them and the vehicle paint to prevent any scratching but even that is really unlikely. Value wise this...
  view full answer...
  
• Does Inno Roof Rack Fit 2015 Lexus GS 350 Without Doing Any Modifications
  Yep, it absolutely does; I verified for you with the manufacturer that the Inno roof rack does indeed fit a 2015 Lexus GS 350, including your F-Sport model, and you will not have to cut the bars or do any type of modification. For the complete roof rack on your Lexus, you will need the following parts: - Inno Aero Crossbars # INXB108-2 - Inno Flush Feet for Aero Crossbars # INXS200 - Custom Fit Kit # INK418
  view full answer...
• 2021 BMW X3 Inno Roof Rack Options for Flush Factory Rails
  Yes, there are Inno roof rack fits for the flush rails on your 2021 BMW X3. I prefer the crossbars that overhang the legs instead of ending in them because you get more real-estate to work with but there is something to be said for the sporty look the latter offers. Below are the parts needed for either roof rack style for your vehicle. Flush Feet Style (Sporty) 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS400 Fit Kit - # INTR140 Through Feet Style (Standard) 54" Aero Crossbars...
  view full answer...
• Flush-Mount Roof Rack Options For 2018 Honda Civic
  Since Thule recommends 53" crossbars for your 2018 Honda Civic, you will not want to go shorter. This is because going shorter could be too close to the mounting brackets and that will not provide sufficient room to install the Thule system onto the roof. Luckily, there is a flush-mounted system that will fit your vehicle, but not from Thule. If you have the hatchback then go with Rhino-Rack ROC25 Roof Rack # RR78TR and if you have the sedan then go with Rhino-Rack ROC25 Roof Rack # RR92XR....
  view full answer...
• Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting Points
  For your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
  view full answer...
• Thule Flush Mount Roof Rack For 2005 Toyota Prius
  The Thule AeroBlade roof rack has been discontinued and replaced by the WingBar Edge, so there isn't a fit kit for those crossbars for your 2005 Toyota Prius. If you'd like a Thule flush mount roof rack for your '05 Prius you can use the Edge, which consists of Thule WingBar Edge Crossbar - Silver # TH23RE or Black # TH56FE, Edge Clamp Feet # TH79SC, and Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145181. This is a premium option so if you'd like something that is still...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for a 2019 Honda Civic Coupe
  For your 2019 Honda Civic Coupe I recommend going with the Inno roof rack that uses the Flush Feet because it is the only roof rack that currently fits which has a great OEM look with the aero-style bars. The parts that you need for this are the 42" crossbars # INXB108-2, Flush Feet # INXS200, and Fit Kit # INK683. This system comes with locks to secure it to your roof and a 100 lb weight capacity that allows you to carry your kayak. Then for a kayak carrier I highly recommend the Yakima...
  view full answer...
• Will the Q-Clips Q-102 fit Older Yakima Q-Towers
  I spoke with my contact at Yakima and he informed me that the discontinued Q102 Q-Clips that you referenced will work with the Q-towers you bought around 2001. He also said that for your 2004 Chevy Malibu Maxx you would need two sets of these clips, and as long as your crossbars are long enough you would be good to go. The recommended crossbar length for your vehicle is 58 inches. If your current bars aren't long enough and you needed a set you would want the Round 58 inch Crossbars part...
  view full answer...
• Roof Rack For 2018 Honda Civic Coupe With Sunroof To Carry Kayak
  You can carry a kayak on a roof rack on the 2018 Honda Civic Coupe with a sunroof as long as you do not try to open the sun roof while you are carrying the kayak. I recommend Inno Aero Aluminum cross bars part # INXB108-2 with Inno Feet part # INXS200 and fit kit part # INK683. The Aero bars of the Inno system will help cut down on wind noise. To carry the kayak I recommend Yakima JayLow part # Y04073 because it allows you more space on the roof for other gear because the kayak sits...
  view full answer...
• How to Carry Surfboards on a 2018 Honda Civic Si Coupe
  In order to carry surfboards on the roof of your 2018 Honda Civic Si Coupe you are going to need a roof rack and surfboard carrier. For the roof rack, I recommend the Inno Aero Crossbar System which is composed of part # INXB108-2, part # INXS200, and part # INK683. This system has aero crossbars for reduced wind noise/drag with integrated t-slots. Then for the surfboard carrier I recommend the Inno Locker Watersport Carrier part # INXA445. This system utilizes the track system listed...
  view full answer...
• How to Carry Two Kayaks on a 2014 Kia Sorento LX
  The Inno Roof Rack, # INXB108-2, and # INXS100 is a good roof rack for your 2014 Kia Sorento LX with the flush mount factory side rails. The kayaks may not fit if you just lay them down side by side on the crossbars, so I recommend using a 2-kayak carrier like the Malone 2 Kayak Carrier, # MPG115MD. This carrier will hold the kayaks on their side and it is compatible with the Inno crossbars. You could also use a post-style carrier like The Stacker, # TH830, from Thule. We have demonstration...
  view full answer...
• Recommended Roof Rack for a 2016 Honda HR-V
  We have a few roof racks to fit your 2016 Honda HR-V with a naked roof. I recommend the Inno Aero Roof Rack consisting of the 42" Crossbars # INXB108-2, the Inno Feet # INXS200 and the Inno Fit Kit # INK878. I recommend this rack because it has an OEM look as the Aero bars do not extend past your roof for a clean, tight fit. Also, the elliptical shape helps to create an aerodynamic system with no need for a fairing. This bar is 42" long and can support 165 lbs. However, be sure to consult...
  view full answer...
• Custom Fit Low Profile Roof Rack System For A 2016 BMW X5
  I have the perfect roof rack for your 2016 BMW X5 that matches all the requirements you have specified. For a roof rack with aero crossbars and no overhang, you will want the Inno Aero Crossbars part # INXB108-2, part # INXS400, and part # INTR140. The Inno Aero Roof Rack System is a direct fit for your vehicle and the cross bars that mount to the vehicle's side rails are placed into the end caps on the foot pack included with this kit. This will in turn position the crossbar ends directly...
  view full answer...
• Carrying a Kayak on a 2007 Honda Civic Sedan
  For your 2007 Honda Civic, you'll want to keep it simple, as the height of the car means there's no reason to go with bigger, expensive load assist carriers. Since it sounds like you are just looking to carry a kayak, a simple, easy to remove roof rack is the best pick. Prior to using the roof rack, you'll want to verify your roof capacity with your owner's manual or manufacturer. This capacity will include the weight of the kayak, carrier and roof rack, and will be limited by the lowest...
  view full answer...
• Roof Clearance for ROC25 Roof Racks and Finding Compatible Cargo Boxes
  The Rhino-Rack ROC25 Roof Rack # RR78TR is a newer system designed to be extremely low profile. The exact roof clearance depends on how much your roof slopes. When we installed this on a 2019 Nissan Rogue, we found the clearance from the roof to the bottom of the FRONT bars to be 1-1/2 inches at the center of the roof and 2 inches near the towers. The rear bars only had a half inch of clearance! I attached the review video at the bottom of the page if you want to see it in action. We played...
  view full answer...
• Roof Rack for a 2017 Honda Civic LX Coupe
  The 2017 Honda Civic LX Coupe doesn't have a lot of fits available for it, but Inno makes a pretty solid range of fits for your vehicle. I recommend their aero bar kit, consisting of: Inno Aero Crossbars, 42 inches, Black, part # INXB108-2 Inno Flush Feet for Aero Crossbars, part # INXS200 Custom Fit Kit for Inno Racks, part # INK683 The shape plus the C-Channels let you use a variety of accessories and cargo solutions. I recommend verifying the roof capacity of your vehicle with...
  view full answer...
• Will A Roof Rack On My 2019 BMW X3 Interfere With My Sunroof Operation
  Any aftermarket roof rack you purchase for your 2019 BMW X3 with flush rails may have issues with interference between the roof rack and the sunroof. In fact, this interference is mentioned in all roof rack instruction manuals. My recommendation for customers who want to know if there will be interference is to put your front crossbar and tower/feet/legs together and place it on the roof in the correct position. Do not install it, just put it in place on the roof. Then CAREFULLY open your...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2019 Honda Civic Coupe
  In keeping with the sporty look of your 2019 Honda Civic Coupe I recommend going with the 42" Inno Aero Crossbars # INXB108-2, Flush Mount Feet # INXS200, and Fit Kit # INK683. This is the only roof rack that currently fits where the aero-style bars end inside the feet which gives you a great OEM looking roof rack with a 100 lb weight capacity. Another great feature of this roof rack is that the feet come with locks so that you can deter theft of both your roof rack and any accessories...
  view full answer...
• Best Aero Roof Rack and Rooftop Cargo Box Fit for 2019 Honda Civic 2-Door Coupe
  For your 2019 Civic 2-door coupe the roof rack I recommend is Inno's Flush Aero rack made of parts # INXB108-2, # INXS200 and # INK683. You may not know the Inno name but they are the major player in OEM roof racks for many popular vehicles like Subaru, Toyota and Honda. Their racks are well made and well priced. This Flush Aero rack features aerodynamic wing-like cross bars that cut through the wind better than other shapes which means they will make less noise. The bars terminate in...
  view full answer...
  
• Roof Rack and Bike Rack for 2019 Honda Civic
  Yes! The Inno Roof Rack Fit Kit for 2019 Honda Civic # INXB108-2, # INXS200, and # INK684 is a great roof rack. Even if you did not link it in your question, this would have been my first suggestion for how it meets your specific needs: not damaging for the car, good for long distances, durable, and cost-effective. The clamps # INK684 are fitted for each specific vehicle model so, if installed correctly, will fit into the grooves in a way that will NOT damage your car. I often purposely...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2017 Honda Civic SI Coupe
  Sounds like what you need is a roof rack system and a kayak carrier for your 2017 Honda Civic SI Coupe. For the roof rack, my best recommendation for your 2017 Honda Civic SI Coupe is an Inno Roof Rack System with parts # INXB108-2, # INXS200, and # INK683. I picked this kit since it's low-profile and I like the Inno Flush Feet # INXS200 towers that limit overhang. Some like longer bars for more bar space which we have as well. But for your specific vehicle, I've found that the Flush Feet...
  view full answer...
• Recommended Roof Rack For 2006 Honda Civic 4-Door
  For a nice looking roof rack on that is designed for your 2006 Civic I recommend the Inno Roof Rack, part # INXB108-2, # INXS200, and # INK326. This roof rack features low-profile crossbars that do not extend past the feet, giving a more "factory" look.
  view full answer...
• Lowest Profile Roof Rack for a 2016 Audi A6 Sedan
  The lowest profile roof rack for a 2016 Audi A6 Sedan is the Inno Aero Crossbar System part # INXB100-108, part # INXS200, and part # INK412. This system sits about 3-1/2" to 4" from the roof to the top of the crossbar but it is hard to get exact measurements due to all the different roof shapes. I have attached a photo of the Inno Aero Crossbar System installed on a different vehicle that way you can get a better feel for how tall it is.
  view full answer...
  
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Recommended Roof Rack and Track System for Truck Topper to Carry Canoe on 2012 Toyota Tundra CrewMax
  We can get you the parts needed to install a roof rack on your truck topper so you can haul your canoe. There are advantages to systems in regards to quality and value, and for your application the best fit is from Rhino-Rack, who is known for their quality, which is consistent with other brands, but often not with as high a price tag. What I recommend is: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B This will give you 59 inch crossbars on your camper shell,...
  view full answer...
• Can Leg on Rola Roof Rack be Replaced for 2006 Honda Civic
  We do have the following parts still listed as replacement parts for a Rola roof rack: Replacement Cage Nuts part # 59710 Replacement Wrenches part 38371 Replacement Rubber Buffer Strips part 59846 (discontinued) Replacement End Support Covers part # 59887 For your application though if that leg is damaged badly then we need to get you a different roof rack. When I reached out to my contact at Rola he said that part has been discontinued so there aren't any replacements for you. If your...
  view full answer...
  
• Recommended Inno Roof Rack For 2013 Honda Civic Coupe Naked Roof
  The custom fit kit part # INK642 that you referenced is the correct fit kit for the 2013 Honda Civic Coupe. To complete the roof rack system you will need Inno Aero Crossbars part # INXB130-138 and Inno Through feet part # INXS250. The Inno crossbars are aerodynamic to cut down on wind noise and have integrated T-slots to make mounting accessories easier. The through feet are designed so the bar sits on top of the feet and allows for bar overhang, which comes in handy if you have a water...
  view full answer...
  
• Roof Rack Recommendation For A 2024 Honda CR-V Sport L
  Hello Ken. We do have roof rack options for your 2024 Honda CR-V Sport L. Does your CR-V have the OEM flush mounted rails that run front to back? I ask because we offer roof rack option for both naked roof vehicles as well as vehicles with the OEM flush mounted rails. So, I will go ahead and recommend options for both roof styles: OEM Flush Mounted Rails - Thule WingBar Evo Crossbars # TH711300 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo # TH52KE Naked...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2018 Lincoln MKX
  The roof rack I recommend for your 2018 MKX with a naked roof is the Inno Aero Bar roof rack part numbers # INXB115-2, # INXS200, and # INK676 because this custom fit rack has aero bars which are very quiet, installs very easily, and we know it fits and works well on the MKX as we had the chance to install the rack on one. Check out the linked install video I attached for this rack to see us walk through the install of the rack on a 2015 MKX. Then for a kayak rack I recommend the Yakima...
  view full answer...
  
• Roof Rack Recommendation for 2016 Fiat 500X with Smooth Roof
  There is a great option for a roof rack from Inno, who is also the only manufacturer that makes a rack which fits your 2016 Fiat 500X with a naked roof. This will give your 500X a low-profile, sleek and durable roof rack that can carry all kinds of gear. The rack consists of: - Inno Aero Crossbars # INXB100-108 - Inno Flush Feet # INXS200 - Custom Fit Kit # INK482 As you can see by the accompanying photo of this roof rack on a 2016 Fiat 500X the Inno's crossbars fit the exact width of...
  view full answer...
  
• Where to Install Feet of Inno Roof Rack on a 2014 Toyota Prius v
  I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v: 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS200 Fit Kit - # INK870 For the front crossbar you will space the feet out at 20-1/2" and position the feet 2" in front of the door edge like you mentioned. For the rear crossbar you will space the feet out 20-3/4" and position the feet 25-1/2" back from the door edge. Attached is a snapshot of these specs out of the installation...
  view full answer...
  
• Inno Roof Rack Recommendation for 2008 Toyota Prius
  The Inno Aero Bar Roof Rack part # INXB108-2, # INXS200, and # INK705 is a great option for your 2008 Toyota Prius. It does come with locks and also the aero shaped bars help minimize wind noise. This rack does install using door clamps and the feet then rest on rubber pads on the roof of your vehicle. Over time these racks hold up just fine. I'd periodically remove the feet and clean them and the vehicle paint to prevent any scratching but even that is really unlikely. Value wise this...
  view full answer...
  
• Roof Rack for 2022 Chevy Traverse with Naked Roof
  For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise.
  view full answer...
• What Is The Lowest Profile Roof Rack For A 2023 Mazda CX30 With Factory Flush Rails?
  Removing the factory rails will definitely be the way to go if you want to have the roof rack sit as low as possible. This way the towers can sit directly on the roof, as opposed to sitting on top of the rails. Removing the rails is actually something we recommend fairly frequently for a 2023 Mazda CX30. For you I recommend the Thule WingBar Setup. The towers and crossbars will add only about 4-1/8" of height to your roof. This consists of the following parts; Thule Wingbar 53" # TH711400 Evo...
  view full answer...
• Crossbar Spacing Instructions For The Inno Aero Crossbars On A 2015 Toyota Prius
  The Inno Aero Crossbars # INXB100-108 with the flush feet # INXS200, with the fit kit # INK865 will need to be mounted: -15-3/4" from the gap between the front and rear doors, for the rear, &, -11-3/4" from the gap between the front and rear doors, for the front. I have included a a diagram depicting these measurement for you to check out as well.
  view full answer...
  
• Recommended Roof Rack for a 2015 Honda Civic Coupe
  The Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK642 is a great cost effective option for a 2015 Honda Civic Coupe and what I recommend using. In fact, it is the most cost effective option we have with the aero shaped crossbars. It also has a very sleek design since the crossbars don't extend past the mounting feet. I have attached a full list of options below.
  view full answer...
• Are there Any Thule Crossbars for My 2013 Honda Crosstour?
  There is not a fit kit for your 2013 Crosstour because Thule does not make a set of bars compatible with your vehicle. Instead, you're limited to using either the SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars # SR1002, or any of the following: -Inno Aero Crossbars # INXB130-138 for a set of 51" and 54" long bars with the custom feet # INXS250, and the fit kit # INK587, -Inno Aero Crossbars # INXB123-130 for a set of 48" and 51" long bars, with the custom feet # INXS250,...
  view full answer...
• Roof Rack Options For 2020 Lexus RX 350 With Panoramic Glass Sunroof
  If your Lexus has flush mounted rails that run back and forth on the roof, I recommend to use the Thule WingBar Evo Aluminum Crossbars part # TH711200 with the feet part # TH710601 and fit kit part # TH186044 for the 2020 Lexus RX350 F sport with panoramic roof. This rack does fit with the panoramic roof however Thule recommends that you do not open the glass roof when the rack is installed because it will damage the roof, the accessories on the rack and create a lot of wind noise. The...
  view full answer...
• Does Inno Roof Rack Fit 2015 Lexus GS 350 Without Doing Any Modifications
  Yep, it absolutely does; I verified for you with the manufacturer that the Inno roof rack does indeed fit a 2015 Lexus GS 350, including your F-Sport model, and you will not have to cut the bars or do any type of modification. For the complete roof rack on your Lexus, you will need the following parts: - Inno Aero Crossbars # INXB108-2 - Inno Flush Feet for Aero Crossbars # INXS200 - Custom Fit Kit # INK418
  view full answer...
• How to Carry Two 65 Lb Kayaks with a 2015 Honda Civic Si
  I looked in the owner's manual for your 2015 Honda Civic Si and was not able to find any reference to what your roof's weight capacity is. Therefore, your best option to determine this would be to contact the dealer with your VIN. Assuming the weight capacity of your roof is rated for the weight of your kayaks/rack/carrier, I recommend using the Inno Roof Rack part # INXB108-115, # INXS200, and # INK642 with two sets of the Swagman Contour Kayak Carrier w/ Tie-Downs - J-Style - Fixed Arms...
  view full answer...
• Lowest Profile Roof Rack for 2022 Mazda CX-5 With Bare Roof
  The lowest-profile roof rack for your 2022 Mazda CX-5 is the flush-mounted Inno rack on your bare roof. The overall height added will be 4 inches give or take a small amount (the curves of the roof will mean this can vary). The flush-mount does not shift the mounting point, however, as the feet have to be positioned at specific points on your CX-5, per the instructions. The parts that make up the Inno rack that fit your '22 CX-5 are the following: - Inno Aero Crossbars # INXB108-115 -...
  view full answer...
• Flush-Mount Roof Rack Options For 2018 Honda Civic
  Since Thule recommends 53" crossbars for your 2018 Honda Civic, you will not want to go shorter. This is because going shorter could be too close to the mounting brackets and that will not provide sufficient room to install the Thule system onto the roof. Luckily, there is a flush-mounted system that will fit your vehicle, but not from Thule. If you have the hatchback then go with Rhino-Rack ROC25 Roof Rack # RR78TR and if you have the sedan then go with Rhino-Rack ROC25 Roof Rack # RR92XR....
  view full answer...
• Thule Flush Mount Roof Rack For 2005 Toyota Prius
  The Thule AeroBlade roof rack has been discontinued and replaced by the WingBar Edge, so there isn't a fit kit for those crossbars for your 2005 Toyota Prius. If you'd like a Thule flush mount roof rack for your '05 Prius you can use the Edge, which consists of Thule WingBar Edge Crossbar - Silver # TH23RE or Black # TH56FE, Edge Clamp Feet # TH79SC, and Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145181. This is a premium option so if you'd like something that is still...
  view full answer...
• Aero-Style Roof Rack for 2018 Lexus RX 350 with No Roof Rails
  We can help you with an aftermarket roof rack for your 2018 Lexus RX 350 that has a bare roof with no sort of rails or fixtures. The current options come from Inno, a prominent maker of OEM roof racks for many import vehicles. Their three rack systems for your RX 350 are shown on the linked page. The first two racks shown use longer cross bars which extend out past the mounting legs to give you the most available cargo space. The last one shown uses shorter bars that terminate in the...
  view full answer...
  
• Why are Roof Rack Crossbars Different Lengths for a 2007 Acura MDX with Naked Roof
  You have to consider the whole system and how the designs are different. Since they are all different the bars won't necessarily be all the same. There are some designs, for example from Inno, that have bars that are even shorter because the way the feet are designed they have to be a certain length. If you want to go with a quality aero bar roof rack the Rhino-Rack is a great choice. You will need the following parts to install it on your 2007 Acura MDX with naked roof: 2500 Roof Rack...
  view full answer...
• Recommended Solution to Carry 4 Bikes on 2017 Mini Cooper 4 Door with Hardtop
  I have a solution for you, but the Curt # C11417 is not a confirmed fit on the 2017 Mini Cooper; it is designed for older models of the Mini Cooper only. The only available hitch confirmed to fit the 2017 Mini Cooper (excluding S and John Cooper Works editions) is the EcoHitch # 306-X7290, which has a 1-1/4" receiver. With that said, this EcoHitch is a Class I hitch with a 150-lbs tongue weight capacity and you cannot carry 4 bikes on a Class I receiver. I'll also note that you would...
  view full answer...
• Can An Inno Roof Rack Fit Kit BE Swapped Out To Fit A New Vehicle
  Hi Randy, Both the Custom Fit Kits # INK202 and # INK745 work with XS200, XS250, or INSU-K5 feet so you would be able to swap out the fit kit to match the new vehicle. You will want to check that the length of crossbar needed for the new vehicle is the same, otherwise the crossbars could be either too long or too short to mount. What is the new vehicle?
  view full answer...
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Roof Rack and Surfboard Carrier for 2008 Honda Accord Sedan
  The Inno square bar roof rack part numbers # INB127, # INSUT, and # INK745 which fits your 2008 Honda Accord sedan would be the rack I recommend as it's a higher quality roof rack at a lower price than it's competition. Then for a surf board carrier the Inno Surfboard Carrier part # INA744 would be a great solution as well.
  view full answer...
• Recommended Roof Rack For Carrying Cargo On 2012 Honda Accord Sedan
  I recommend going with the largest crossbar available so that you have as much room as possible for your cargo. A nice large setup that fits your 2012 Honda Accord Sedan is the Inno Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # INXB138-2. You'll also need the appropriate Feet # INXS250 and Fit Kit # INK745.
  view full answer...
• Recommended Square Bar Roof Rack Setup For 2010 Honda Accord Sedan
  I have a solution for you, but Thule does not have any roof rack kits available for your vehicle. While I'm sure this is not the news you would like to hear, I will go ahead and give you my recommendation for a new setup. If you would like to stick with a similar square-bar setup, then I'd go with Inno Square Crossbars - Steel - Black - 50" Long # INB127. You will also need Feet # INSUT and Fit Kit # INK745. Locks and keys are included for the crossbar feet, which will keep it secured to...
  view full answer...
• Roof Rack To Carry 2 Kayaks On Top Of A 2011 Honda Accord
  We have exactly what you need to carry 2 kayaks on the roof of your 2011 Honda Accord Sedan. The most affordable option is the SportRack Semi-Custom Roof Rack 50" Long # SR1010. This simply clamps onto your door jams and provides a 50" long square bar for kayaks, bike racks, cargo baskets, or other roof-mounted accessories. The only downside is that the weight capacity is only 90lbs and may not be sufficient for both of your kayaks unless they are very lightweight. Another option, although...
  view full answer...

Do you have a question about this Roof Rack?