Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4

See what our Experts say about this Inno Accessories and Parts

• Maximum Tightness of Inno Memory Mount Clamps # INBRP9
  There isn't really a maximum tightness on the Inno Memory Mount Clamps # INBRP9 that you referenced. As long as the clamps are secured around the crossbars they are going to provide a safe attachment. I did check with Inno and found that there is a minimum bar size that these will work with. As long as your crossbars are at least an inch wide and 3/4 of an inch tall these will work just fine. These minimum specs are probably the best way to determine exactly how tight or how far the clamps...
  view full answer...
• Replacement Memory Mount Clamps for an Inno Lowdown Cargo Box
  The Inno Memory mount, part # INBRP9 will be compatible with your older LowDown Cruiser box.
  view full answer...
• Will Memory Mount Clamps Work With Inno Roof Box BRQ55
  Hello! I was unable to find a reference to just BR55 but if you were asking about the Inno Roof Box 55 - BRQ55 - then according to Inno, yes, the Memory Mount Clamps for Inno Rooftop Cargo Boxes # INBRP9 are compatible.
  view full answer...
• Replacement Memory Mounts Upgrade for Inno Rooftop Cargo Boxes
  The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 do not come with a new seal. I've attached photos of these mounts as they are often used for replacements or upgrades. The seal or molding is not available as a replacement part according to the manufacturer.
  view full answer...
  
• Will the Memory Mount Clamps for Inno Rooftop Cargo Boxes Work with the Stream
  Yes, you can use the Inno Stream Rooftop Cargo Box with the Memory Mount Clamps for Inno Rooftop Cargo Boxes part # INBRP9.
  view full answer...
  
• Mounting an Inno Cargo Carrier to a Trac Rac Van Rac Ladder Rack
  I have a solution for you, however part # INBRP9 is a replacement part and not intended to fit to a ladder rack. Instead, you'll need to get part # INBRP12, which will fully replace the mounting hardware on an Inno Shadow, Wedge or Stream cargo box and allow it to install to the channels of a Trac Rac Trac Van rack. The included T-Bolts are the correct shape to fit directly into the existing TracRac channel and tall enough to correctly install.
  view full answer...
• Will the Inno Shadow 16 Cargo Box Fit a 2016 Subaru XV Crosstrek
  The Inno Shadow 16 # INBRA1210BK is compatible with crossbar spreads ranging from 23-1/2" - 39". Since it looks like your 2016 Subaru XV Crosstrek has OEM rails that are spaced 27" apart on center this means the Shadow 16 will fit perfectly on your crossbars. You may also want to measure from the center of your rear crossbar to the line between your roof and hatch to make sure you will have unrestricted access to your rear hatch area. If this measures at least 12" then you are good to...
  view full answer...
  
• Replacement Clamps for Inno Roof Deck Platform Rack # INA510
  Yes, the Memory clamps # INBRP9 are the correct replacement clamps for the Inno Roof deck Platform Rack # INA510.
  view full answer...
• Replacement Thule Ascent Mounting Hardware
  I have a solution for you, but the Inno # INBRP9 haven't been tested and I doubt they could be made to work without damaging the box too much. Instead, I recommend using the Replacement Quick Grip Mount Assembly - Thule Ascent, Atlantis, and Force Cargo Box - Qty 1 # TH05738, which are the correct replacement clamping hardware for a Thule Ascent 1600 cargo box.
  view full answer...
• Will the Memory Mounts Work with the Inno Shadow 16 Rooftop Cargo Box
  Yes, the Inno Shadow 16 Rooftop Cargo Box part # INBRA1210BK will work with the Memory Mount Clamps for Inno Rooftop Cargo Boxes part # INBRP9 and allow for quick and easy installation of the cargo box.
  view full answer...
• Should I get Memory Mounts for Inno Shadow 16 Rooftop Cargo Box?
  The Inno Shadow 16 Rooftop Cargo Box # INBRA1210BK is a great box. This version of the Inno Shadow Box has a Quick Mount system which does a great job of securing the box to your roof rack. So as is, your Inno Shadow 16 will fit your crossbars with no issue. However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. If you want extra security and snugness,...
  view full answer...
• What Replacement Clamps Do I Need for My Thule Pulse Cargo Carrier?
  I have a great alternative for you. Unfortunately, the Memory Mount Clamps for Inno Rooftop Cargo Boxes # INBRP9 are only compatible with Inno Shadow or Wedge series cargo boxes. However, for replacement clamps for your Thule Pulse model carrier (it fits all Pulse models), you need the Replacement Fast Grip Clamp for Thule Pulse Rooftop Cargo Boxes # TH94JV. It is important to note that the # TH94JV comes in a quantity of 1. If you need more replacements, you will need to order more than...
  view full answer...
• Does The Memory Mount Clamps For Inno Shadow And Wedge Series Fit Round Cross Bars?
  Yes, the Memory Mount Clamps for Inno Rooftop Cargo Boxes # INBRP9 for the Inno Shadow and Wedge series rooftop cargo boxes, like the Inno Shadow 16 Rooftop Cargo # INBRA1210BK will fit your round crossbars. The Memory Mount Clamps for Inno Rooftop Cargo Boxes # INBRP9 will also fit square, aero, elliptical, and most factory crossbars.
  view full answer...
• Memory Mount Clamps for Inno Shadow Rooftop Cargo
  Inno rack BR1200 is the same as the Inno Shadow # INBRA1210BK which the Memory Mount Clamps for Inno Rooftop Cargo Boxes Item # INBRP9 can be used with. The other box you mentioned is not compatible nor do we have any hardware that would work with it.
  view full answer...
• Can You Use Memory Mount Clamps With The 8 Cubic Foot Inno Rooftop Cargo Box
  Yes, you can use the Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 with the Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black # INBRA220R-BK. You just set the box on the crossbars then insert the clamps into tracks over crossbars and close the levers.
  view full answer...
• Replacement Mounting Clamps for Yakima RocketBox Pro 14 Cargo Box
  I have the part you need! However, the Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 are only compatible with select Inno Shadow and Wedge cargo boxes. They are not desined to fit your Yakima RocketBox Pro If you need replacement clamps for all of your Yakima RocketBox Pro 14 # Y07192, you need 4 of the Replacement Quick-Dial Mounting Assembly for Yakima RocketBox Pro Cargo Box - Qty 1 # Y8870097. These clamps are direct replacements that are designed for your RocketBox...
  view full answer...
• Recommended Memory Mount Clamps For Inno Ridge Rooftop Cargo Box # INBRA220R-BK
  When replacing the memory mount clamps on your Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black # INBRA220R-BK The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 will work for your box. These clamps will allow for quick and easy installation on your crossbars. The clamps do not have to be adjusted again after initial setup. I attached a review video link below.
  view full answer...
• Mounting Hardware Retro-Fit for Old Inno Lowdown Cruiser Roof Box
  The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 are not able to be retrofitted to other cargo boxes like your discontinued Inno Lowdown Cruiser. The only retro-fit options are the style that use u-bolts like # TH05603 or standard bolts like # TH04997 so you drill holes in your box in the appropriate areas for installation. Then you seal old holes with sealant like # LT37467.
  view full answer...
  
• Can The Inno Memory Mount Clamps Be Fitted To a Inno Ridge Rooftop Cargo Box?
  The Memory Mount Clamps # INBRP9 are only going to be compatible with the newer Inno cargo boxes like the Inno Wedge 660 Rooftop Cargo Box # INBRM660BK. You will not be able to use the Memory Clamps with your Inno Ridge Rooftop Cargo Box # INBRA220R-BK.
  view full answer...
• Comparing Inno Wedge 660 and Inno Shadow 16 Cargo Boxes
  The Inno Shadow 16 # INBRA1210BK has 13 cu ft of storage while the Inno Wedge 660 comes in Gloss Black # INBRM660BK or Gloss White # INBRM660WH and has 11 cu ft of storage. It may has less storage space but the Wedge 660 is actually more of a premium option due to the sleeker design of the lid and the Memory Mount hardware which is much easier to use over the U-Bolt system that comes with the Shadow 16. If you like the design and extra space of the Shadow 16 but want the Memory Mount hardware...
  view full answer...

Do you have a question about this Accessories and Part?