See what our Experts say about this Inno Roof Rack

• Roof Rack Recommendation for a 1992 Honda Civic Hatchback
  I have a solution for you, but the Rola 59758 is not a confirmed fit for your 1992 Honda Civic hatchback. Instead you would want the Sportrack part numbers # SR1003 and # SR1116 if you are looking for an economically priced option or the Inno part # INB107,# INSUT, # INJK, and # INK130 for a custom fit rack that will fit very well.
  view full answer...
  
• Will the Thule Rapid 400XT Foot Pack Work on a 2009 Toyota Matrix
  I do have an option for you but I spoke to my contact at Thule and they said that the Thule Rapid 400XT Foot Pack that you have cannot be reused on your 2009 Toyota Matrix because the fit kits are no longer available. Therefore, if you wanted to reuse your crossbars you would need both the Thule Rapid Traverse Roof-Rack Foot Pack part # TH480R and the Thule Roof-Rack Fit Kit for Traverse Foot Packs part # THKIT1512.
  view full answer...
  
• Roof Rack Recommendation for a 1995 Honda Civic
  For your 1995 Honda Civic 3 door hatchback the Sportrack roof rack part numbers # SR1003 and # SR1116 is a confirmed fit. However, this is a semi-custom fit roof rack that doesn't always fit every vehicle perfectly since it's designed to fit as many vehicles as possible. A much better option would be the INNO part numbers # INB107, # INSUT, and # INJK, and # INK130. This is a custom fit rack that would fit much better.
  view full answer...
  
• Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting Points
  For your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
  view full answer...
• Adding Roof Rack Crossbars on a 2013 Nissan Xterra to Mount Cargo Basket
  You can add crossbars to your 2013 Nissan Xterra. The aftermarket crossbars available do fit different years of the Xterra but I can't speak to the OEM bars. To add crossbars I recommend using Inno square bars # INB107 with feet # INFR that clamp around the side rails. With the bars installed and at the proper width you can mount the Thule basket # TH859XT.
  view full answer...
• Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
  The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square Crossbars # INB107 - Feet # INTR - Fit Kit # INTR103 If you let me know what you plan on using the roof rack for I can make a recommendation for you!
  view full answer...
• Parts Needed to Carry a Bike on the Roof of a 1995 Honda Civic Coupe
  We do have a handful of roof racks that are confirmed to fit your 1995 Honda Civic Coupe. The most popular roof rack option that we have for your Civic is the Inno square bar roof rack which consists of the Crossbars # INB107, Feet # INSUT, Short Roof Adapter Kit # INJK, and Fit Kit # INK130. This system has a weight capacity of 140 lbs and will give you a roof rack spread of 24 inches. For a more economical options we have the SportRack roof rack option which consists of the SportRack...
  view full answer...
• Recommended Roof Rack for 2010 Chevy HHR
  For a square bar roof rack for your 2010 HHR with raised roof side rails we do have options from Thule and Inno which use either 42-inch or 43-inch bars. These can be seen on the linked page along with all other rack brands and rack types. For a cost effective Thule option I like the Rapid Crossroad setup with 43-inch square bars; this consists of parts # TH712100 and # TH710401. For the lowest-cost square bar rack Inno offers 42-inch bar setup using parts # INB107 and # INFR. Do note...
  view full answer...
• Which Yakima Roof Mount Bike Racks Work with Factory Cross Bars on a 2004 Subaru Baja
  Basically, the factory cross bars on your 2004 Subaru Baja are not directly compatible with Yakima roof mount accessories like the FrontLoader Wheel Mount Bike Carrier, # Y02103, because of their size and/or shape. But there is a solution. If you wanted the FrontLoader specifically, you would need to add the Inno Square Bar Roof Rack, parts # INB107, # INTR and # INTR104.. You can then add the FrontLoader.
  view full answer...
• Inno Square Bar Roof Rack for a 2016 Chevy Trax with Factory Side Rails
  The Inno feet # INFR are a fit for the 2016 Chevy Trax if it has factory side rails that run front to back on the roof. If you have a different roof configuration let me know. The bars that are recommend for the Trax that also work with these feet are the 42 inch bars # INB107.
  view full answer...
• Roof Rack Options for Transporting Kayaks on 1996 Honda Civic Hatchback
  Since you intend to transport a kayak(s) on the roof of your 1996 Honda Civic Hatchback my suggested starting point is a review of your owner's manual to confirm how much weight the vehicle's roof can safely handle. If you cannot find this in your manual a local Honda dealership should be able to check this using your car's VIN number. Depending on that roof weight capacity, and the weight of your kayak(s), the very lightweight foam block type of kayak carrier may indeed be a good option...
  view full answer...
• Roof Rack and Kayak Carriers for a 2010 Toyota Matrix
  To carry kayaks, a roof rack is only part of it. You'll also want a kayak carrier, primarily because they make loading, unloading and securing the kayak significantly easier. For the roof rack, if you have a bare roof with no rails that run front to back, I recommend the Inno # INB107 square crossbars, with the # XS250 feet, and # INSU-K5 fit kit. This kit is custom fit to your vehicle and installs quickly to your roof with secure clamps. Additionally, it includes locks to secure the...
  view full answer...
• Roof Rack Recommendation for 2000 Acura Integra Hatchback
  We do offer roof rack options for your 2000 Acura Integra Hatchback. Inno offers a custom fit rack which consists of these parts: • 42 inch square crossbars, part # INB107 • Roof rack feet for square bars, part # INSUT • Short roof adapter, part # INJK • Vehicle-specific fit kit, part # INK130 SportRack offers a semi-custom rack option, which would be made up with these parts: • Semi-Custom rack, part # SR1003 • Short roof adapter, part # SR1116 If I had to choose between the two,...
  view full answer...
• Will the Inno Feet for Square Crossbars Fit My 2009 Pontiac Vibe?
  I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your 2009 Pontiac Vibe. Although, I did confirm with Rhino-Rack that they do have crossbars that are compatible with your vehicle's rails. For the Rhino-Rack setup, you will need: - Inno Square Crossbars - Steel - Black - 42" Long - Qty 2 # INB107 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200,...
  view full answer...
• Best Method To Haul 3 Or More Bikes On A 2011 Chevrolet HHR
  I do have an option that will allow you to carry more than two bikes on your 2011 Chevrolet HHR however, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24756 and Curt Trailer Hitch Receiver part # C11447 are the only two hitch receivers available for your vehicle. As they are both a Class I hitch receivers, you will be limited to carrying two bikes on the rear of the vehicle with a hitch receiver per the manufacturer's. The most cost effective options would involve the use of...
  view full answer...
• Will the Curt Cargo Basket # C18115-117 Fit My 2000 Nissan Xterra?
  If you have factory crossbars currently on your 2000 Nissan Xterra, the Curt Basket # C18115-117 will work as long as your crossbars do not exceed 3" wide x 1-5/8" tall. In order to know for sure, I recommend measuring the width and height of your crossbars. Also, you will need to determine if your crossbars are adjustable in order to accommodate the required crossbar spread of 22"-50". The way to do this is to simply measure the space between your crossbars at different adjustable points....
  view full answer...
• Will SportRack Vista XL Cargo Box Fit a 2010 Nissan Xterra
  The SportRack Vista XL Cargo Box # SR7018 that you referenced will fit your 2010 Nissan Xterra, providing you have either factory crossbars or aftermarket crossbars that measure less than 4 inches wide. To install the cargo box the crossbar spread should be between 23-5/8 inches and 34 inches wide. I have the installation instructions attached. If you need crossbars for your Xterra, I recommend the Inno system which consists of square crossbars # INB107 and the feet # INFR. I like Inno's...
  view full answer...
• Availability Of Replacement Inno Square Crossbar For Stolen Crossbar
  Inno does not sell single square bars, so even though you only need one bar you'll need to buy a pair. You didn't mention anything about the size of your crossbar, so you'll need to measure your current crossbar and match it to one of the below lengths: 42" # INB107 46" # INB117 50" # INB127 54" # INB137 58" # INB147 65" # INB165
  view full answer...
• Recommendation for Roof Rack to Carry a Ladder on a 1993 Ford Festiva
  I can help you find the correct roof racks for your 1993 Ford Festiva. An economical option for you is the Sport Rack # SR1003 in combination with the short roof adapter # SR1116 will allow you to have a two bar system even though you only have two doors. This roof racks capacity is 130lbs. Another option and the one that I recommend for your vehicle, is the Inno kit made up of the # INB107, # INSUT, # INJK, and # INK148. This kit uses a short roof adapter # INJK also to accommodate...
  view full answer...
• Inno Square Crossbar Roof Rack that Fits 2008 Nissan Xterra
  Inno does have a roof rack that fits your 2008 Nissan Xterra that uses the # INFR you mentioned. You need just the # INFR and the # INB107 and you'd be set.
  view full answer...
• Availability of Trailer Hitch for a 2000 Acura Integra
  It looks like there are no longer any trailer hitches that fit your 2000 Acura Integra. The Curt Trailer Hitch Receiver 11147 was discontinued this year (2023) so you might try searching to see if you can find that hitch elsewhere, otherwise I recommend installing a roof rack in order to add some cargo-carrying capacity to your vehicle (if that's what you're needing to do): Sedan - 42" Square Crossbars # INB107 - Feet for Square Crossbars # INSUT - Fit Kit # INK130 Hatchback Same parts,...
  view full answer...
• Which Thule Roof Cargo Box Fits a 2007 Kia Rondo With Flush Roof Rails
  To use a plastic cargo box such as the Thule Force Medium # TH6356B that you referenced you will first need to install a roof rack on your 2007 Kia Rondo and the one I recommend is the Inno square bar system made of parts # INB107, # INTR and # INTR103. This rack is made for your flush rails. You can refer to the linked video for details on its design. I recommend using an accessory folding step like # TE97FR from Telesteps which gives you easier access to your cargo items. The lightweight...
  view full answer...
• Will the Inno Roof Rack Fit on a 2020 Nissan Kicks with Fixed Mounting Points
  It looks like the 2020 Nissan Kicks has flush mounted rails with fixed mounting points, which is likely what you're seeing on your Kicks with the flat plastic strips/covers; there should be slots that pop up to allow you to install roof rack legs with fixed mounting points. With that said, the Inno Roof Rack Kit using parts # INXB115-2 (bars), # INXS350 (towers) and # IN28FR (fit kit) you were looking at is a confirmed fit on your 2020 Nissan Kicks with those fixed mounting points. The...
  view full answer...
• Recommended Roof Rack and Cargo Basket 2011 Hyundai Elantra Touring
  The roof rack I recommend for your 2011 Hyundai Elantra Touring is the Inno Roof Rack with Square Crosbars # INB107 and Foot Pack # INFR. This economically priced roof rack clamps to your vehicle's elevated, OEM side rails. The square, steel crossbars can accommodate a variety of accessories including cargo baskets. Then, Yakima makes some very nice cargo boxes like the Yakima SkyBox Rooftop Cargo Box # Y07336. This box has 18 cu ft of carrying space. The maximum crossbar spread the Yakima...
  view full answer...
• Can Older Thule Square Bars be Installed on a 2011 BMW X3 with Flush Bars?
  Hey Giang, thanks for reaching out! The Thule feet that work with the older Thule square bars are no longer available, but we've found that the Inno square bar feet will work. Inno has the Feet # INTR that fit with the Fit Kit # INTR141 for the flush rails on your 2011 BMW X3, but Inno doesn't show this combo as a fit for your vehicle, so I recommend going with their Aero Roof Rack # IN98PR which gets you a whole new setup designed to fit your vehicle exactly. What do you plan on using...
  view full answer...
• Parts Needed to Install 65 inch Inno Square Bar Roof Rack on 2025 Mazda CX-50
  Hey Lorraine, what you'd need is the foot kit part # INTR with the fit kit part # INTR162 and you'd be able to use the Inno Square bars # INB165 on the roof of your 2025 Mazda CX-50! How did you like the Inno rack?
  view full answer...
• 2003 Subaru Forester Parts to Fit Thule Square Bar to Flush Mount Rails
  Hey Jose, thanks for reaching out! If you have the new style Thule square bars with the slots on the undersides, like the part # TH712200, then you'll need these Thule parts: - Evo Flush Rail Feet # TH710601 - Fit Kit # TH75JE - Lock Kit # TH450400 For the older style of Thule square bars that don't have the slots on the undersides, we'll need to get you setup with some parts from Inno, as Thule doesn't make parts that fit with that crossbar anymore. Here are the Inno parts you need: ...
  view full answer...
• Are INNO Square and Thule Square Crossbars the Same Dimensions
  INNO square crossbars and Thule square crossbars are the same dimensions, 7/8 inch by 1-1/4 inch. The part # INTR would then be compatible with Thule crossbars. To complete the rack for your 2015 Jeep Grand Cherokee you would also need the # INTR132.
  view full answer...
• How to Use Older Thule Crossbar on Roof of 2022 Lexus GX 460
  Thule changed their square bar roof rack crossbars a few years ago with the EVO setup like you mentioned. The difference is now that the bars attach to the feet of the rack via a channel on the bottom of the bars instead of the older style that wrapped around the bar. But the good news is that Inno makes square bar roof racks that use the exact same crossbar dimensions as the Thule bars so instead you could use the Feet # INTR, and the fit kit part # INTR152 and you'd be able to use your...
  view full answer...
• Installation Method for Inno Square Bar Roof Rack on 2016 Lexus GX 460
  If the flush roof side rails on your 2016 Lexus GX 460 do not have a fixed-point mounting system, but rather have tracks like those shown in the linked photo, then the rack crossbars' position will be adjustable. If you see one specific mounting point in the rails then this means the car is intended for a fixed-point rack installation. This Inno rack, composed of parts # INB127, # INTR and # INTR134, works for both roof configurations.
  view full answer...
  
• Will Inno Square Crossbar Roof Rack Fit on 2003 Subaru Forester X with Rola Roof Cargo Basket
  Yes, the 46" Long Inno Square Crossbars # INB117 are compatible with both your Thule Canyon XT Roof Cargo Basket # TH859XT-8591XT and your 2003 Subaru Forester X. Since your Forester has the flush mounted rails you need the Inno Feet # INTR and the Fit Kit # INTR104 to utilize the square crossbars. I have attached a photo of this same kit along with the 31" Inno Fairing for Roof Racks # INA260 on a 2008 Subaru Forester a customer sent in that you can check out.
  view full answer...
  
• Are Straps Replaceable for the Thule Crossroad Square Bar Legs
  The straps on the Thule Crossroad Foot Pack are not replaceable so if the straps are broken then you need part # 753-3399 which is a single unit. Please note that if you have a 2009 Chevy Equinox like what you put in the fit guide then the only square bar roof rack option that is compatible with your vehicle comes from Inno and includes the 46" Long Square Bars # INB117, Feet # INTR, and Fit kit # INTR103. This only fits if you have the flush mount rails that run from front to back. If...
  view full answer...
• Can Inno Square Cross Bars mount to Thule Podium Cross Bar Towers?
  While roof rack manufacturers do not specifically make or test their products with products from other manufacturers, I can tell you that the Inno Square Bars, # IN436L, are the same dimensions as the Thule Square Crossbars prior to 2019. Thule changed the design of their square bars in 2019. If you have the old Thule Podium Feet, # TH460, then technically the Inno bars should fit based on their dimensions, but you must understand that there would be no warranty coverage or guarantees...
  view full answer...
• Can I use Inno Aero Crossbars on Thule Towers?
  I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
  view full answer...
• Weight Rating of Inno Roof Rack for 2013 Lexus GX 460
  Roof racks are rated for dynamic load capacity. A static rating is not provided since it is presumed a rack on a car will be moving. Vehicle roof weight capacities are usually common for all years that are within the same generation. The Current generation of the GX 460, the second generation, includes all models from 2009 to the present. I checked the online owner's manual for the 2013 GX 460 but no specific weight rating for the roof is indicated; your printed manual may differ and...
  view full answer...
• How to Carry 3 Kayaks on a Chevrolet Equinox with Factory Roof Rack
  I have a solution for you, but it would be tough to fit 3 kayaks on a J-style carrier and the Stacker on the factory roof rack of your 2008 Chevrolet Equinox. You may be able to use two of the Thule Stacker Kayak Carriers, # TH830, to carry all three kayaks on their side, but that will depend on the size of the kayaks. If the smaller kayak pretty thin and does not take must as much room on the crossbars, then this should work. The other option would be to purchase an aftermarket roof...
  view full answer...
• Roof Rack for Fixed Mounting Points - 2011 Mazda CX-9
  Here's a couple solutions that you might like. The Rola # R6003 Extreme Roof Rack mounts to your existing fixed mounting points, and the cross bars ar 53" long. Cross bars rated for 165 pounds, but check you owner's manual for roof weight rating. The Inno # INB127 features 50" square steel crossbars. You will additionally need the # INXP feet and # INTR124 fit kit. Like the Rola, this will mount to your existing fixed mounting points. Cross bars rated for 220 pounds.
  view full answer...
• Inno Feet for Mazda CX-5 With Factory Flush Roof Rails
  If you are wanting to go with a Inno roof rack and you have factory rails on your 2020 Mazda CX-5, you have two options. If you want the aero style crossbars grab these bars # INXB115-123 the Inno Through Feet # INXS350 and the custom fit kit # IN53FR. If you have the square bars # INB117 you will need these feet # INXP and this fit kit # IN53FR
  view full answer...
• Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
  The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square Crossbars # INB107 - Feet # INTR - Fit Kit # INTR103 If you let me know what you plan on using the roof rack for I can make a recommendation for you!
  view full answer...
• What Parts do I Need to Use the Inno Square Crossbars on My 2004 Subaru Forester with Flush Rails?
  Yes! I am happy to confirm that the following parts are compatible with your flush rails on your 2004 Subaru Forester: - Inno Square Crossbars - Steel - Black - 46" Long # INB117 - Inno Feet for Square Crossbars - Track Systems, Flush Side Rails, and Fixed Mounting Points # INTR - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR104 As far as the video that you mentioned, the reason why we do not have flush rails pictured in the demonstration video...
  view full answer...
  
• Recommendations for a Roof Rack and Accessories on a 2015 Jeep Grand Cherokee
  I have a solution for your roof rack carrying needs whichever season it may be. First lets start with the rack that will custom fit your 2015 Jeep Grand Cherokee. Since you have the flush roof rails that run front to back I recommend the Inno Roof Rack # INTR, # INB127, and the custom fit kit # INTR132 to complete your rack setup. These parts will give you the bars, mounts, and fit kit to attach everything to your vehicles roof. According to Inno this product should be used on vehicles...
  view full answer...
• Recommended Roof Rack for a 2007 Toyota Sienna Using a Thule Hullavator
  I would be happy to! There are two different types of rails to mount a roof rack you could have on the roof of your 2007 Toyota Sienna so I will make recommendations for both. The Thule Hullavator item # TH898 also requires an extra 4" - 8" past the mounting legs for the lift assist function to operate without hitting the side of your van. I have listed the two options below that would be the best choice and included the longer crossbars: With Raised Rails Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• What Feet and Fit Kit will Work For Thule Square Bars on a 2016 Toyota Highlander?
  From the looks of your photo, it looks like you have Thule SquareBar Evo Crossbars # TH712400. In order to mount these Thule crossbars on your flush rails, you can use the Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4 # INXP and the Custom Fit Kit for Inno INTR # INTR153. Your Xcargo roof box will work if it can attach to square rails. If you need another option for a guaranteed fit for square rails, I recommend the Trunx Rooftop Cargo Carrier...
  view full answer...
  
• Roof Rack and Canoe Carrier Recommendations for a 2008 Chevy TrailBlazer
  If you are looking to set the canoe directly on top of your roof, then you will want a carrier with foam pads like the Malone Canoe Carrier, # MPG156. This carrier was specifically designed for vehicles with or without a roof rack. The foam pads will protect the canoe and your roof from scratches. The tie-downs are included. Based on the weight of your canoe and depending on how far you plan to travel, I strongly recommend looking into a roof rack if you don't already have one and a roof...
  view full answer...
• Parts Needed to Install Inno Square Bar Roof Rack on 2012 Lexus GX460 with Flush Rails
  The Inno roof rack fit kit part # INTR134 is part of a roof rack that fits your 2014 Lexus GX460. The other components needed are the crossbars # INB127, and the feet part # INTR. With those and the fit kit you mentioned you'd be set.
  view full answer...
• Inno Roof Rack that Fits 2012 Jeep Grand Cherokee with Factory Track on Roof
  Inno has a roof rack that fits your 2012 Jeep Grand Cherokee with the factory tracks on the roof with the part numbers # INB127, # INTR, and # INTR132 but the # INXR-6 that you referenced won't fit your vehicle.
  view full answer...
• Inno Roof Rack that Fits 2018 Mercedes Benz GLA 250
  To install an Inno square bar roof rack on your 2018 Mercedes Benz GLA 250 the correct components are part numbers # INB117, # INXP, and # INTR162 which does attach to the flush rails on the roof of your vehicle. Then you could install the Inno Gravity Ski Carrier part # INA951 for a 6 ski rack or part # INA952 for 3 skis.
  view full answer...
• Will Thule Big Mouth Bike Rack Fit Square Inno Crossbars
  The Thule Big Mouth bike carrier will work with your Inno square crossbars. The Big Mouth is designed to fit on Thule square bars which measure 1-1/4" x 7/8" which is the same as Inno bars such as # INB127. You will want to take a quick measurement to verify your bar size and if they are the same it will work. Keep in mind if you want to lock the Big Mouth to your bars the rack will need Thule One-Key System Lock Cylinders # TH450200.
  view full answer...
• Are Straps Replaceable for the Thule Crossroad Square Bar Legs
  The straps on the Thule Crossroad Foot Pack are not replaceable so if the straps are broken then you need part # 753-3399 which is a single unit. Please note that if you have a 2009 Chevy Equinox like what you put in the fit guide then the only square bar roof rack option that is compatible with your vehicle comes from Inno and includes the 46" Long Square Bars # INB117, Feet # INTR, and Fit kit # INTR103. This only fits if you have the flush mount rails that run from front to back. If...
  view full answer...
• How to Carry 3 Kayaks on a Chevrolet Equinox with Factory Roof Rack
  I have a solution for you, but it would be tough to fit 3 kayaks on a J-style carrier and the Stacker on the factory roof rack of your 2008 Chevrolet Equinox. You may be able to use two of the Thule Stacker Kayak Carriers, # TH830, to carry all three kayaks on their side, but that will depend on the size of the kayaks. If the smaller kayak pretty thin and does not take must as much room on the crossbars, then this should work. The other option would be to purchase an aftermarket roof...
  view full answer...
• Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
  The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square Crossbars # INB107 - Feet # INTR - Fit Kit # INTR103 If you let me know what you plan on using the roof rack for I can make a recommendation for you!
  view full answer...
• Recommendation of Kayak Carrier to Carry 2 Kayaks on 2010 Hyundai Santa Fe With Side Rails
  Anytime you are going to haul cargo on the roof of your 2010 Hyundai Santa Fe you will want to check the owners manual or with the Hyundai dealer for what the roof capacity is for your vehicle. The roof capacity will let you know how many pounds you will be able to haul on the roof of your vehicle. To install a kayak carrier to the roof of your Santa Fe you will need crossbars that will run from side to side. If your Santa Fe has the flush mount rails that run from front to back, you...
  view full answer...
• Recommended Roof Rack And Kayak Carrier For 2008 Chevy Equinox LS
  For your 2008 Chevy Equinox LS, I recommend the Inno Roof Rack consisting of the Inno Square Crossbars - Steel - Black - 46" Long - Qty 2 # INB117, the Inno Feet for Square Crossbars - Track Systems, Flush Side Rails, and Fixed Mounting Points - Qty 4 # INTR, and Custom Fit Kit for Inno INTR Roof Rack Feet # INTR103. This will give you a 140 lb capacity with a 30 inch crossbar spread. This is currently the only roof rack we have that is a confirmed fit for your vehicle. For your kayaks,...
  view full answer...
• Will Yakima RocketBox Pro 14 # Y07192 Fit a 2009 Chevy Equinox
  If your 2009 Chevy Equinox has factory cross bars that run side to side, then the Yakima RocketBox Pro 14, # Y07192, is a direct fit for your vehicle. If your Equinox has side rails that run front to back, then you would first need to add cross bars before you could mount the box. You would need Inno Feet (QTY 4) for Square Crossbars and Custom Fit Kit parts # INTR, # INTR103 as well as Inno Square Crossbars, # INB117. You could then mount the box. I have included a link to the installation...
  view full answer...
• Recommended Roof Rack Kit for 2008 Chevy Equinox Sport
  We do have one option to fit on the 2008 Chevy Equinox Sport, but I'm not showing any options for a naked roof; it looks like the Sport and regular models might have flush mounted roof rails that run front to back. If this is the case, then you can use the Inno Roof Rack Kit for 2008 Chevy Equinox that uses parts # INB117 (crossbars), # INTR (towers), # INTR103 (fit kit). This kit would provide you the base you need to add a kayak carrier like the etrailer J-Style Kayak Carrier - Folding...
  view full answer...
• Inno Roof Rack for 2008 Chevy Equinox w/ Flush Mounted Roof Rails
  Inno has a rack solution that will fit the flush mounted roof rails on your 2008 Equinox. The rack would consist of the following parts: 46 Inch Crossbars, part # INB117 Roof Rack Feet, part # INTR Vehicle Specific Fit Kit, part # INTR103
  view full answer...
• Recommended Roof Rack and Roof Box for Long Skis on 2008 Chevy Equinox With Factory Rails
  That's awful nice of you to do for your son and I'm sure he'll be appreciative as you support his ski racing. We can help you and your son along the way because we have the exact parts you need to add a roof rack and rooftop box for his skis so he can easily transport them on his way to competitions or practice. First, let's start with a roof rack, and there is one rack that will fit a 2008 Chevy Equinox with flush-mounted rails, and it is a square bar system from Inno. This rack is composed...
  view full answer...
• Which Thule Roof Cargo Box Fits a 2007 Kia Rondo With Flush Roof Rails
  To use a plastic cargo box such as the Thule Force Medium # TH6356B that you referenced you will first need to install a roof rack on your 2007 Kia Rondo and the one I recommend is the Inno square bar system made of parts # INB107, # INTR and # INTR103. This rack is made for your flush rails. You can refer to the linked video for details on its design. I recommend using an accessory folding step like # TE97FR from Telesteps which gives you easier access to your cargo items. The lightweight...
  view full answer...
• 2008 Chevy Equinox Correct Roof Rack Parts
  I have a solution to get a roof rack on your 2008 Chevy Equinox but the XS450 legs that you have won't work with the raised rails of the Equinox. The parts that you need for a roof rack include the following: 46" Square Crossbars - # INB117 Feet for Square Crossbars - # INTR Fit Kit - # INTR103 Attached is a review video of this kit on a 2012 GMC Terrain for you to check out.
  view full answer...
• Recommended Roof Rack That Can Work With A Kayak Carrier For 2004 Mazda Tribute
  Rhe Thule Ride-On Adapter part TH532 has been discontinued but will only work with bike carriers. This adapter uses plastic mounting hardware and cannot handle the stress a kayak would have and would fail. You will need to either install a roof rack designed to be able to handle the weight and stress, or if you have crossbars already on your Tribute you can find a kayak carrier that will fit your crossbars. If you do not have a kayak carrier and you have factory crossbars on your Tribute,...
  view full answer...
• Bike Rack Recommendation for a 2007 Chevrolet Equinox
  There are three different bike rack options that you can choose from for your 2007 Chevrolet Equinox. Your options are a trunk mount bike rack, a roof mount bike rack or a hitch mount bike rack. The best option is a hitch mount bike rack because they are much easy to setup and use and they have no contact with the vehicle limiting the potential for paint scratches. These bike racks do require a trailer hitch. The most popular hitch mount bike rack among our Equinox customers is the Swagman...
  view full answer...
• Roof Rack Recommendation for 1998 Jeep Cherokee with Flush Factory Roof Rails
  I have a great roof rack solution for your 1998 Jeep Cherokee with flush mounted roof rails that run front to back, but the Rhino Rack part # RRJA2542 is not designed to fit those rails. Instead we have the INNO rack part numbers # INB127, # INTR, and # INTR103 which is a fit for the roof style you have on your Cherokee so this would be your best option.
  view full answer...
• Parts Needed To Mount Yakima OffGrid to 1999 Jeep Cherokee
  The Yakima OffGrid # Y07139-09 does have a capacity of 165-lbs, so putting a 100-lbs kayak on it would be ok. However, the Yakima OffGrid Roof Rack # Y07139-09 does not come with the roof rack crossbars included, so you would already need to have a roof rack or factory crossbars already installed. If you don't already have a roof rack system on your 1999 Jeep Cherokee there are a number of different options available depending on what style of roof you've got and whether there are side...
  view full answer...
• Inno Roof Rack for 2009 Hyundai Santa Fe GLS w/ Flush Mounted Roof Rails
  I've confirmed with Inno that their square profile crossbar roof rack that consists of the following parts: 46 Inch Square Crossbars, # INB117 Inno Feet for Square Crossbars, part # INTR Vehicle Specific Fit Kit, part # INTR103 IS a fit for your 2009 Santa Fe w/ the flush mounted roof rails.
  view full answer...

Do you have a question about this Roof Rack?