Inno Shaper 80 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 32-1/2" - 110 lbs

Inno Shaper 80 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 32-1/2" - 110 lbs

Item # IN568

lowest price pledge

Retail:$249.99

Our Price: $224.99

You Save: $25.00
Roof Basket

This item qualifies for Free Shipping

Shipping Weight: 20 lbs

Quantity: 
In Stock
Inno Shaper 80 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 32-1/2" - 110 lbs Aluminum IN568
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Inno
  • Small Capacity
  • Cargo Basket
  • Square Bars
  • Short Length
  • Aluminum
  • Silver
Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Clamps to square crossbars. Lowest Prices for the best roof basket from Inno. Inno Shaper 80 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 32-1/2" - 110 lbs part number IN568 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

Inno Roof Basket - IN568

Lightweight aluminum basket lets you transport gear on your vehicle's roof. Easy to load with tapered side walls and flat cargo area. Low-profile design reduces drag and wind noise. Clamps to square crossbars.


Features:

  • Cargo basket lets you transport gear on the roof of your vehicle
    • Keeps wet, soiled, or oversize gear out of your vehicle's interior
    • Maximizes your vehicle's cargo-carrying capacity
  • Aerodynamic, low-profile design helps reduce drag and wind noise
  • Tapered side walls and flat cargo area make it easy to load and unload gear
  • Easy, clamp-on installation to square crossbars
    • Mounts around bars with hand knobs and brackets
  • Rustproof and lightweight anodized aluminum construction
  • Silver powder coat finish resists corrosion


Specs:

  • Application: square crossbars
    • Minimum crossbar spread: 20"
  • Weight capacity: 110 lbs
  • Dimensions:
    • Exterior: 46-5/8" long x 32-1/2" wide x 3" tall
    • Interior: 41-3/8" long x 30" wide x 2-1/8" tall
  • Carrier weight: 15 lbs
  • Limited lifetime warranty


The Shaper 80 cargo basket is a lightweight option for transporting gear on your roof. It maximizes your cargo-carrying capacity, and it keeps damp or dirty gear out of your vehicle's interior. The aerodynamic shape helps to reduce drag and wind noise, and the low-profile design and flat cargo area make it easy to load gear. The basket mounts to square bars with included hardware. And it's constructed of aluminum with a silver powder coat finish so it won't rust if you leave it on your roof.


Aerodynamic Shape

Inno Shaper 80 cargo box

The Shaper 80 front panel works like a fairing to direct air up and over the basket. This reduces drag and wind noise as you drive. And the basket sits flush with the top of your crossbars to create a low profile.


Easy-to-Load Design

The basket has tapered side walls that allow you to easily load your gear. The floor is made of flat panels that make it easy to shift and properly position cargo.


You can secure your gear to the basket with straps, rope, or a cargo net (sold separately). If using a cargo net, attach the net hooks to the bottoms of the side walls or the front and rear panels. Straps or ropes should be routed under the basket and around your cargo to secure it in place.


Simple Installation

The basket installs easily on square crossbars with brackets and hand knobs. Simply set the brackets over your bars, swing the T-bolts into place under the bars, and tighten the hand knobs to secure the basket in place.


Rubber pads are included to cushion the bottom of the basket where it rests on your crossbars. This will protect the crossbars from scratches and help to reduce road noise.



IN568 Inno Shaper 80 Roof-Mounted Cargo Carrier - 110 lbs







Video of Inno Shaper 80 Roof Cargo Basket - Square Bars - Aluminum - 46-1/2" x 32-1/2" - 110 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Inno Shaper80 Rooftop Cargo Basket Review

Today we're going to be taking a look at the Inno Shaper80 Rooftop Cargo Basket. This is for the aero bars. Part number INXA568. It's also available for square bars. Part number IN568. This lightweight roof basket is going to allow you to carry up to 110 pounds of cargo on the roof of your vehicle.

It features a low profile design which is going to make loading and unloading a snap. It has a reversible design with either end acting as a fairing to reduce drag and wind noise. I've gone ahead and removed the cargo so we can go over some additional features. As you can see it's an aluminum construction with a black powder coat finish so it's going to resist rust and corrosion. It has a plank floor here so dirt, water, and debris will not accumulate. It will just fall right through. The interior usable dimensions are 41.5" long by 30" wide by 2" deep.

It's going to fit aero and factory roof racks that will accommodate channel mounted accessories. Now that we've gone over the features, I'll go ahead and show you how to get it installed. First thing we'll need to do is we'll need to insert our square head bolts into the channel of our rails here. You may or may not have to remove your end cap, depending on your cross bars. On ours we do have to remove the cap here. Then we can take our square head bolts and we're going to put two on each crossbar.

I'm just going to kind of push down on the rubber portion here and then slide it on. I'm going to push one all the way to the other side. Then we'll just put one right here on this side. Repeat the same process for the rear bar here. If you're not working with Inno bars, you may have to remove a rubber strip here in the center in order to slide on your square head bolts. Now we're ready to put our basket on.

You'll want to be sure that your brackets here are loosened up. That way we can adjust them all to fit our square head bolts. With those in place, let's go ahead and put our basket on our roof. For now we'll just kind of slide it on and then we'll hop up there and adjust it to fit. We want to move our square head bolt here to where goes through our bracket. We'll get them all lined up and then we can insert our spacer. Now for our spacer, we're just going to lift up and it's going to go between the bracket and the square head bolt. We need to make sure to get the indented portions lined up there. Then we'll set it back down. Then we can install a lock washer. Then the nut that goes on top. Then we'll grab our included tool to tighten that down. Then we can put our little rubber cap on. Then we'll repeat the same process for the other three. I went ahead and put my end caps back on. Now let's not forget to tighten down our sliding brackets underneath. I'll take my included tool and we'll just tighten that down. Repeat the same process for the other three. One last thing to keep in mind when installing your roof basket. You want to be sure to leave enough room so you can still open up your rear hatch. Now with everything in place, let's go ahead and load up some cargo. With everything all strapped down, we're ready to hit the road. That's going to complete our look at the Inno Shaper80 Rooftop Cargo Basket. Part number INXA568.

0
0

Ask the Experts about this Inno Roof Basket

Do you have a question about this Roof Basket?


  • Can the Inno Shaper 80 Cargo Basket Be Reversed on Roof of Vehicle
  • The front and back sections of the Inno Shaper 80 part # IN568 are symmetrical. They are the same. Basically either end of the rack could be used as the front or the back.
    view full answer...

  • Aluminum Roof Cargo Basket that Fits Factory Crossbars of 2019 Nissan Rogue
  • I have a similar aluminum cargo basket that fits the factory crossbars of your 2019 Nissan Rogue but the Inno you mentioned only fits square crossbars which isn't what you have on your vehicle. Instead you'd want the Thule Trail XT part # TH864XT which has been tested and confirmed a fit for your vehicle's crossbars, is aluminum like the Inno and also has an aerodynamic shape as well. I attached a review video for this basket for you to check out as well.
    view full answer...

  • Sport Rack Semi-Custom Roof Rack and Basket on a 1994 Mitsubishi 3000GT
  • The Sport Rack Semi-Custom Roof Rack system comes in two parts, part # SR1008 and part # SR1116 . You will have to order them individually and they will ship separately. It is a confirmed fit for a 1994 Mitsubishi 3000GT. You will want to confirm with your owners manual the maximum roof capacity of your vehicle before loading a roof basket and cargo onto the top of the vehicle. I recommend the lightweight Inno Shaper, part # IN568 . This is a lightweight carrier with adjustable...
    view full answer...


Do you have a question about this Roof Basket?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality roof basket for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof basket information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Dustin K
Photos by:
Zach O
Written by:
Ronnie R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924