See what our Experts say about this Yakima Roof Rack

• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
  The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Does Thule DockGrip Kayak Rack Fit 2018 Subaru Outback Limited Factory Crossbars
  Yes, I checked with Thule and for the factory crossbars of your 2018 Subaru Outback Wagon the DockGrip part # TH895 is a confirmed fit and will work well.
  view full answer...
• What is Advantage of Top Channel on Yakima JetStream Bar over Core Bar
  The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less expensive and still a really great bar but it comes down to what type of attachment you prefer. If you let me know what vehicle you have I can help get all of the parts together to install either style of rack on your vehicle.
  view full answer...
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
  There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
  view full answer...
  
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?
  I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
  view full answer...
• Can I Convert a Hullavator 897XT to Work w/ Yakima CoreBar Crossbars?
  I am sorry the older Hullavator 897XT you own can not be converted to mount on Yakima CoreBar Crossbars like item # Y00421 because there is no t-slot. I confirmed this information with Thule. The only solution I have for you is to upgrade to the new Hullavator item # TH898 you were looking at.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Recommended Yakima Round Bars for a 2025 Toyota RAV4 W/ Factory Flush Rails
  Hey A, for your 2025 Toyota RAV4 with factory flush rails you can use the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y55FB which includes the Yakina round bars, the towers, and the round bar adapter. These towers will attach directly to your flush rails on your RAV4, so you won't need anything else to get it to work. Let me know if there is anything else I can do for you!
  view full answer...
• Which Rook Rack Would be the Most Quiet on My 2024 Lexus LX600 F Sport?
  Hello David, Congrats on the new Lexus, I really like the new grill designs I have been seeing on the SUV's. I understand your concern with the noise as some systems can be quite noisy. When it comes the the rail systems you definitely get what you pay for. I am showing that the 2024 Lexus LX 600 comes with the flush mounted rails (please refer to the image that I attached) so you will want the Thule WingBar Evo Roof Rack for Flush Rails - Aluminum - Black - Qty 2 # TH49GA (for silver...
  view full answer...
• Bike Rack Recommendation for a 2017 Honda Civic
  Hello Tonya - Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you!
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Parts Needed to Swap the Yakima CoreBar Crossbars from an Acura MDX to a 2022 BMW X6
  Assuming you're wanting to use the Yakima CoreBar Crossbars # Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06161 as well as the BaseLine Towers for Yakima Crossbars # Y28TR.
  view full answer...
  
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Adapter Needed to Use Older Yakima PowderHound on New Yakima CoreBars
  I have a solution for you, but the Replacement Mounting Hardware for Yakima PowderHound # Y8860040 will not work with your 3044 Yakima ski rack; I confirmed this with my contact at Yakima. The Universal MightyMounts # Y03590 is exactly what you need to adapt your first generation PowderHound ski rack (for round bars) to fit the Yakima CoreBars, like # Y00421 on your vehicle. I've attached the installation instructions for you to check out at the bottom of the page.
  view full answer...
• Can the Thule Hullavator Pro Kayak Carrier Be Used With Yakima CoreBar Crossbars
  Yes, you can mount the Thule Hullavator Pro Kayak Carrier # TH898 on Yakima CoreBars like the Yakima CoreBar Crossbars # Y00421. The Thule Hullavator Pro Kayak Carrier # TH898 can be mounted using the clamps or in crossbar channels. Just keep in mind that to use the Hullavator, your crossbars need to extend 4"-8" beyond your roof rack feet.
  view full answer...
• Will Thule Hull-A-Port Roof Kayak Carrier Fit Yakima Core Bar Roof Rack
  Yes, the Thule Hull-A-Port J-style kayak carrier # TH834 will fit fine on Yakima Core Bar roof rack crossbars. These bars, such as 50-inch set # Y00421, have an aero profile that is fully compatible with the hardware on the Hull-A-Port.
  view full answer...
• Fitting a Thule Ski/Snow Board Carrier to Yakima CoreBar Crossbars
  Without knowing what Thule Ski/board rack you have, it is a little more difficult to ensure you have the proper clamps. If you have the Thule SnowPack Ski and Snowboard Carrier # TH7326 you were looking at, they would already be compatible with the Yakima CoreBar Crossbars like # Y00421. The Yakima CoreBar Crossbars # Y00421 are an aero-style crossbar, which the Thule SnowPack Ski and Snowboard Carrier # TH7326 is already designed for use with aero bars. If you have a different ski/board...
  view full answer...
• Parts Needed to Mount Yakima Space Cadet Cargo Box on Roof of 2008 Honda Odyssey
  In order to mount your Yakima Space Cadet Cargo Box to the roof of your 2008 Honda Odyssey you will indeed need to add crossbars. For your Odyssey that features the factory raised side rails I recommend the Yakima CoreBar System. This roof rack consists of # Y00421 for the two 50 inch CoreBar Crossbars and # Y33TR for the TimberLIne Towers that will attach to the side rails. I have attached a short video demonstration on this roof rack that you can check out. As long as you still have...
  view full answer...
• Parts Needed To Carry a Canoe With Yakima CoreBar Roof Rack
  The design for the Yakima CoreBar Crossbars # Y00421 will not allow for a traditional Load Stops # 753-3761 that are designed to fit in a track type channel. If you wanted to carry a canoe with your CoreBar the Yakima SweetRoll # Y04074 uses saddles to support the canoe above the bars. If you feel switching your crossbars is the best option for being able to use load stops, please let me know what vehicle and roof rack you have so I can ensure you get the right crossbars to fit your towers...
  view full answer...
• Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid
  There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
  view full answer...
• How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side Rails
  So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
  view full answer...
• 2025 Mini Countryman Roof Rack Recommendation for Flush Rails
  Hey Anderson, thanks for reaching out! I have a fit from Yakima that works for the flush rails on your 2025 Mini Countryman, and it includes these parts: - 50" Yakima JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y24AR - Lock Core Kit # Y07204 (optional) I've attached a photo that Yakima took when they tested this fit. What are you planning on using the roof rack for?
  view full answer...
• What are The Differences Between The Yakima SightLine and RidgeLine Towers ?
  The Yakima SightLine Towers # Y64AR and RidgeLine Towers # 8880624 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks # Y07204 is hidden behind the outer cover on the SightLine where the RidgeLine places the lock on the outside of the tower.
  view full answer...
• How is Plastic Lock Core of Yakima Sightline Foot Accessed to Install SKS Lock
  The lock core location for the Sightline feet part # Y64AR is underneath the cover of the foot. So you'd just need to pull the cover off (no tools required) and then underneath it you would see the plastic core that you can remove with a flat screwdriver so that you can install new cores with the part # Y07204.
  view full answer...
• Roof Rack for Mounting 2 Thule Hullavator Pro Kayak Carriers on a 2019 Kia Sedona
  Hey Sharon, The Thule Square Bar Roof Rack # TH98EG that fits your 2019 Kia Sedona won't have wide enough bars to have the required overhang for 2 Thule Hullavator Pro Kayak Roof Racks # TH898 so we'll need to get you set up with the Yakima JetStream roof rack because you can use longer bars. The Thule bars are limited to what they can be mounted on since they have the slits on the underside for the legs. It's also worth noting each Hullavator weighs in at just under 40 lbs so you'll...
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• How to Add a Yakima Round Bar Roof Rack to a 2021 Ford Escape w/ Flush Roof Rails
  Hey Dennis! I checked with Yakima and there are towers and adapters to add a round bar roof rack to your 2021 Ford Escape with the flush rails. You will need the following parts: SightLine Towers for Yakima Crossbars item # Y64AR SightClip Fit Kit for Yakima SightLine Roof Rack Towers item # Y36AR RoundBar SL Adapter for Yakima SkyLine Towers - Qty 4 item # Y03536 Out of curiosity how long are your crossbars? 58" item # Y00409 is what's recommended.
  view full answer...
• Roof Rack for Thule Hullavator on 2023 Hyundai Tucson Hybrid
  Hi David; it looks like the most common configuration for the 2023 Hyundai Tucson Hybrid has flush rails. Assuming you have the flush rails I recommend the Yakima JetStream roof rack using parts # Y00426, # Y27AR, and # Y64AR. This gives you 60" crossbars so you will have plenty of overhang to accommodate the Hullavator # TH898. If you have raised rails or a naked roof let me know and I will see what else is available.
  view full answer...
• Are Replacement RidgeClips Available for 2022 Hyundai Tucson with Flush Rails?
  Hey William, thanks for reaching out! Are you needing this for your 2022 Hyundai Tucson you've previously asked about? If that's the case, the RidgeLine Towers mounted to your flush rails via the RidgeClip 25 kit 8006025 which has been discontinued. At this point you can try to find a rogue 25 kit being sold online, but you'll likely need to update to the SightLine parts that replaced the RidgeLine product line: SightLine Towers - # Y64AR SightClip Fit Kit - # Y27AR Let me know if you're...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Recommended Roof Rack that Fits Two Hullavators for a 2025 Honda CR-V w/ Flush Rails
  Hey Marcel, congrats on the new SUV. The Thule Hullavator item # TH898 requires 28-1/2" of crossbar space to fit and function correctly. This means the crossbars on your CR-V need to be at least 57" long for them to accommodate two carriers. Since the Yakima Jetstream crossbars are the only ones with the mounting tracks built all the way down the center of them you'll need to go with one of their setups. For a roof rack setup that fits your 2025 Honda CR-V with flush rails you'll need...
  view full answer...
• Recommended Roof Rack for a 2023 GMC Yukon XL
  To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
  view full answer...
  
• Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails
  To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Recommended Roof Rack for a 2024 Honda CR-V w/ Flush Rails
  Yes, we do have the parts you will need and congrats on the new vehicle. To add a roof rack to the flush rails on your 2024 Honda CR-V you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity....
  view full answer...
• Recommended Roof Rack for a 2023 Hyundai Tucson w/ a Panoramic Sunroof
  I saw you were looking at some Thule parts which is why I recommended it over a Yakima and we had an installation video. If you are interested in a Yakima roof rack for your 2023 Hyundai Tucson with a panoramic sunroof you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item #...
  view full answer...
• Recommended Roof Rack on a 2023 BMX X5 M50 w/ Flush Rails
  Thanks for the picture! The 60" crossbars might be a bit wide. The roof racks with the longer crossbars are typically used for kayak carriers or people that need to mount two bike racks. I recommend going with more of a flush mount set up and we do have one made by Yakima. It is the 2023 BMW X5 roof rack by Yakima and it includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - JetStream Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima...
  view full answer...
  
• Recommended Kayak Carrier for 2020 Mazda CX-5
  The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
  view full answer...
  
• Can Thule Fit Kit Bolts for 2021 Mazda CX-5 Flush Rails Be Replaced
  The Replacement Bolts for Thule Fit Kit for Podium Style Foot Pack # 7524498001 are not the same style of bolts needed to secure a Thule roof rack to your 2021 Mazda CX-5 flush rails. I took a look at the instructions for 183160 fit kit designed for your vehicle and it looks like the correct replacement bolt is part 50435 but since this fit kit has been discontinued (as of May 2023) this isn't a part that's readily available. I imagine Thule will eventually come back out with a fit kit...
  view full answer...
• Is The Malone FoldAway Carrier Compatible With Subaru Outback Factory Crossbars
  From what I can find in the online owner's manual Subaru just doesn't want you exceeding 150lbs with the factory crossbars, which is same capacity for the Malone FoldAway-5 Kayak, Canoe, and SUP Roof Rack # MAL38FR that you were looking at. They aren't really descriptive with the shape or dimensions of the factory crossbars so you'll want to ensure that they fall within the requirements of the # MAL38FR, which I have pictured below. If your crossbars fall outside of these requirements...
  view full answer...
  
• Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
  view full answer...
• Will Trailer Hitch Fit a 2023 Kia Soul with Center Exhaust
  The Curt Trailer Hitch Receiver # C67FR will sit in the middle of the bumper area on your 2023 Kia Soul so since you have a center exhaust you won't be able to install a trailer hitch on your vehicle. With that being said, we do have some other alternatives for transporting things with your Kia Soul, like a roof rack. If this is something you're interested in adding to your vehicle then I recommend picking up a Yakima roof rack as they have adjustability in them that gives you the best...
  view full answer...
• Recommended Roof Rack for a 2024 Kia Niro EV w/ Flush Rails
  I sure can! To add a roof rack to the flush rails on your 2024 Kia Niro EV, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System...
  view full answer...
• Is There A Trailer Hitch For 2023 Kia Soul GT Line With Center Exhaust
  If you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (August 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece...
  view full answer...
• What is the Best Crossbars and Roof Rack for a 2024 Acura MDX w/ Flush Side Rails?
  Congrats on the new vehicle! To add a set of crossbars to the side rails on the roof of your 2024 Acura MDX, I recommend the roof rack by Yakima which requires the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR
  view full answer...
• Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
  Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
  view full answer...
• Recommended Roof Rack for a 2024 Acura RDX w/ Flush Rails
  To add a roof rack to your 2024 Acura RDX's flush rails you will need the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR This aero bar roof rack system has a 165 lbs capacity and does not extend over the rails. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can buy...
  view full answer...
• Roof Rack Recommendation for 2021 Acura RDX with Flush Factory Rails
  While the search bar is a great way to look up different products, if you're wanting something designed to fit your 2021 Acura RDX with the factory raised rails it's best to use our fitguide system to sort through the vast amount of choices. The Thule AeroBlade Edge Crossbar TH7602B is not a fit for your vehicle but since you have the factory flush rails I recommend using the Yakima JetStream roof rack which consists of the following: 50" JetStream Crossbars - # Y00425 SightLine Towers...
  view full answer...
• Recommended Roof Rack that Attaches to Predrilled Holes on a 2023 Mazda CX-5
  It should but Yakima doesn't have a roof rack that attaches to the mounting points you are describing. Theirs and a couple other manufacturer's all attach to the door frames using custom fit clips. Rhino Rack is the only one that makes bases that connect to the pre-drilled holes in your 2023 Mazda CX-5's roof. You will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2 item # RRVA118B-2 RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms...
  view full answer...
• Roof Rack For a 2023 Acura MDX With Flush Mounted Roof Rails
  I recommend using the Yakima JetStream roof rack on your 2023 Acura MDX as Thule only offers a rack for a naked roof and does not yet support your roof rails. The Yakima will fit your flush roof rails with the Crossbars # Y00425, Towers # Y64AR and Fit Kit # Y49AR. The Yakima Same Key System # Y07204 will allow you to secure the towers to your roof.
  view full answer...
• Do Yakima Roof Racks Fit 2023 Acura RDX
  So we were able to determine that the 2023 Acura RDX wasn't changed from the 2022 model and we then carried over the fits from the previous year. Sometimes one of the rack manufacturers does this first and since we know they did the correct research we know that other brands will also carry over even if they haven't had a chance to test it like with the Yakima Corebar roof rack part numbers # Y00421 # Y64AR, and # Y49AR that we have listed for your 23' RDX.
  view full answer...
• Recommended Roof Rack for a 2023 Acura MDX w/ Flush Side Rails
  To add a set of Yakima Jetstream crossbars to the raised rails on the roof of your 2023 Acura MDX you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
  view full answer...

Do you have a question about this Roof Rack?