Hey Bert, the biggest difference would be the Load Range which is a fancier way of saying the weight capacity. The Continental 235/75R17.5 HTR2 LRH has a Load Range of H whereas the Provider 235/75R17.5 LRJ is a Load Range J which means it has a…
Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".
Hi Marcus! The Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver #TA35ZR weighs a hair over 51 pounds. Pretty heavy, but it is a pretty heavy duty wheel. Do you already have a tire picked out for this? It…
Hey Bob! The wall bracket on the MORryde Safe-T-Rail #MR54BR is 2-1/8" wide. Since you have 2-3/4" it will be able to fit in your available space. Are you upgrading your hand rail or did something happen to the original?
I'd go with a double spring personally, Scott. These are typically going to be used on more heavy duty applications like your enclosed trailer with a pretty heavy door. In order to get a proper replacement though, you'd need measure the width…
Hey Marty. Caliber lists the weight capacity for their Edge Glide XL Transition Plates item #CA47EJ as matching your trailer's ramp door. So whatever your ramp door capacity is is what transition plates will sport. The 4-pack has a combined…
Hello Robert, Yes, the only difference between the 2 is that the etrailer Enclosed Trailer Transition Plate #e32JR is quantity: 1, and the #e99RV is quantity: 2. Right now it looks like if you wanted a better deal to buy 2 of the #e32JR. It is times…
Hey Paul, thanks for reaching out. The Conventional Ramp Door Spring #M386FR is really only for 8' wide trailers, but we do offer more customizable option for 7' doors. Take a look at the following: - Conventional Ramp Door Spring for 8'…
I have an option for you, but I spoke to my contact at Bulldog to try and get a replacement cross shaft for you and he said they are not available. He said that you will just need to get a 12 inch long section of 1 inch cold rolled steel and then…
I have a hardware solution for you. While the CargoSmart X-Track Cargo Organizer #3481788-C does not come with screws, we do carry ones that will work great with the organizer. For wood screws, I recommend the Snap-Loc E-Track Wood Screws #SL49FR. If…
Good afternoon George; no it usually does not! The Fill-Rite Piston Fluid Pump #FR53XQ uses a hand lever with a double piston design and moves 20 gallons per 100 strokes, which means fewer cycles to move the same fuel compared to the rotary crank…
Hey Bert, the biggest difference would be the Load Range which is a fancier way of saying the weight capacity. The Continental 235/75R17.5 HTR2 LRH has a Load Range of H whereas the Provider 235/75R17.5 LRJ is a Load Range J which means it has a…
Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".
Hi Marcus! The Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver #TA35ZR weighs a hair over 51 pounds. Pretty heavy, but it is a pretty heavy duty wheel. Do you already have a tire picked out for this? It…
Hey Bob! The wall bracket on the MORryde Safe-T-Rail #MR54BR is 2-1/8" wide. Since you have 2-3/4" it will be able to fit in your available space. Are you upgrading your hand rail or did something happen to the original?
I'd go with a double spring personally, Scott. These are typically going to be used on more heavy duty applications like your enclosed trailer with a pretty heavy door. In order to get a proper replacement though, you'd need measure the width…
Hey Marty. Caliber lists the weight capacity for their Edge Glide XL Transition Plates item #CA47EJ as matching your trailer's ramp door. So whatever your ramp door capacity is is what transition plates will sport. The 4-pack has a combined…
Hello Robert, Yes, the only difference between the 2 is that the etrailer Enclosed Trailer Transition Plate #e32JR is quantity: 1, and the #e99RV is quantity: 2. Right now it looks like if you wanted a better deal to buy 2 of the #e32JR. It is times…
Hey Paul, thanks for reaching out. The Conventional Ramp Door Spring #M386FR is really only for 8' wide trailers, but we do offer more customizable option for 7' doors. Take a look at the following: - Conventional Ramp Door Spring for 8'…
I have an option for you, but I spoke to my contact at Bulldog to try and get a replacement cross shaft for you and he said they are not available. He said that you will just need to get a 12 inch long section of 1 inch cold rolled steel and then…
I have a hardware solution for you. While the CargoSmart X-Track Cargo Organizer #3481788-C does not come with screws, we do carry ones that will work great with the organizer. For wood screws, I recommend the Snap-Loc E-Track Wood Screws #SL49FR. If…
Good afternoon George; no it usually does not! The Fill-Rite Piston Fluid Pump #FR53XQ uses a hand lever with a double piston design and moves 20 gallons per 100 strokes, which means fewer cycles to move the same fuel compared to the rotary crank…
Trailer door parts are essential for maintaining the safety and functionality of your trailer. Whether you're hauling horses or heavy equipment, these parts ensure smooth operation and protection. Consider the durability, ease of installation, and compatibility with your trailer when selecting parts.
Trailer door parts, like rubber bumpers, are built to withstand heavy use and harsh conditions. Many find them still in excellent condition after a year of regular use, even under the weight of horses or heavy equipment. They typically need replacement every 8-10 years due to sun exposure.
Most trailer door parts are designed for straightforward installation, though some may require drilling new holes to fit your specific trailer. It's important to check compatibility and be prepared for minor adjustments to ensure a perfect fit.
When selecting trailer door parts, consider the material quality, compatibility with your trailer, and the specific needs of your cargo. High-quality materials ensure longevity, while the right fit prevents issues like chipping or pulling away from the trailer.
Trailer door parts are designed to handle various weather conditions, from rain to intense sun. Rubber bumpers, for instance, maintain their integrity and protect your cargo even after exposure to the elements, making them a reliable choice for any climate.
Common issues include misalignment of pre-drilled holes and the need for additional mounting holes. However, these can be easily resolved with some adjustments. Ensuring the right fit and quality materials can prevent most problems, providing a smooth and secure operation.
Filters
