bing tracking image
  1. RV and Camper Bike Racks
  2. Swagman
  3. RV Hitch Rack
  4. Motorhome
  5. Travel Trailer
  6. Fifth Wheel
  7. Flat-Towed Vehicle
Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches
Special Savings on Select Swagman Items.

Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches

Item # S63381
Retail:$413.78
Our Price: $199.00
You Save: $214.78
RV and Camper Bike Racks
Add to cart
In Stock
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full rv and camper bike racks installation instructions. Great price Sprinter Travel Trailer rv and camper bike racks and expert service. Keystone Sprinter Travel Trailer, 2008 rv and camper bike racks by Swagman are available from etrailer.com. For expert service call 1-800-940-8924 to order your Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches part number S63381, or order online at etrailer.com.
  • All Info
  • Reviews (540)
  • Q & A (0)
  • Photos
  • Used (1)

Swagman RV and Camper Bike Racks - S63381

  • RV Hitch Rack
  • Motorhome
  • Travel Trailer
  • Fifth Wheel
  • Flat-Towed Vehicle
  • 4 Bikes
  • Childrens Bikes
  • Cruiser Bikes
  • Mountain Bikes
  • Road Bikes
  • Womens Bikes
  • Fits 2 Inch Hitch
  • Swagman
  • Hanging Rack

This 4-bike rack is perfect for a family who travels. Anti-sway cradles secure your bikes by the top tube and seat post. Heavy-duty frame handles the extra bounce and sway that results from being mounted on the back of your RV.


Features:

  • Hanging bike rack carries 4 bikes using your RV's hitch receiver
  • Anti-sway cradles with soft rubber straps secure bikes by the top tube and seat post
    • Reduce bike-to-bike contact and help prevent scratches and scuffs
  • Pull pin allows arms to fold
  • Anti-rattle hitch pin reduces movement of rack in hitch receiver
  • Hitch lock and cable lock (sold separately) deter theft of your bikes and the rack
  • Frame adapter bar (sold separately) required for bikes without a straight, horizontal top tube
  • Black powder coated steel construction is rust resistant


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Carrying capacity: 4 bikes
  • Weight capacity: 100 lbs
    • 35 lbs per bike
  • Distance between rack arms (outside to outside): 13-7/8"
  • Distance from the center of the hitch pin hole to:
    • Closest edge of carrier: 12-1/8"
    • Farthest edge of carrier: 38-1/8"
  • Carrier weight: 29 lbs
  • Limited lifetime warranty


Approved for use on cars, trucks, vans, SUVs, RVs, motorhomes, and towable campers

Built for RVs

Swagman Original 3-Bike Hanging-Style Rack

The Swagman Trailhead is built to withstand the added vibration and stress that comes from being installed on the back of your RV. The base has no moving parts, and the mast attaches to the shank with steel-reinforced brackets. These overbuilt components ensure that the rack can take any punishment that the road may inflict.


Dual Folding Arms with Anti-Sway Cradles

Swagman Trailhead 4-Bike Hanging-Style Rack Dual Folding Arms

The Trailhead has dual folding arms that provide excellent support for your bikes. They slope up to provide ground clearance for steep driveways and bumpy roads.


Swagman Trailhead 4-Bike Hanging-Style Rack Hitch Switch Lever

To fold the arms down, remove the pull pin at the top of the mast. This leaves a smaller footprint, so you can keep the rack on your vehicle to park in your garage. And when stored in this configuration, it doesn't take up as much space in your garage.


Swagman Trailhead 4-Bike Hanging-Style Rack Anti-Sway Cradles

Anti-sway cradles with rubber straps hold your bikes firmly in place. Each set of cradles has three straps that secure your bike along the top tube and one that secures the seat post or downtube. This multi-point contact helps keep your bikes from rocking back and forth, reducing bike-to-bike contact. The soft rubber cradles rotate around the rack's arms to accommodate bikes of different styles and shapes.


Threaded Hitch Pin

Swagman Titan threaded hitch pin

A threaded hitch pin is included to help eliminate rattle in the hitch receiver during transport. To tighten the pin in your hitch, use a 5/8" wrench (not included). A clip is also included to keep the pin in place.


Available Seccurity and Adapter Bar

Swagman hitch lock and cable lock

An anti-rattle hitch lock and cable lock (sold separately) are available to secure the rack to your vehicle and your bikes to the rack.


Swagman Bike Adapter Bar

If you have a women's bike, kid's bike, or any other bike without a straight, horizontal top tube, you will need an adapter bar (sold separately) to properly mount your bike. The bar fits between the seat post and handlebar stem post of your bike to create a top tube so your bike hangs level on the rack.



63381 Swagman Trailhead 4 Bike Carrier for 2" Hitches - Non-Tilting

Installation Details S63381 Installation instructions

Customer Satisfaction Score:


Customer Reviews

Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches - S63381

Average Customer Rating:  4.7 out of 5 stars   (540 Customer Reviews)

This 4-bike rack is perfect for a family who travels. Anti-sway cradles secure your bikes by the top tube and seat post. Heavy-duty frame handles the extra bounce and sway that results from being mounted on the back of your RV.

by:

Unfortunately, I cannot make a great review for this bike rack. Two issues. The first, even though it is ‘designed’ for four bicycles, getting three on there is more realistic. The second issue is that it hasn’t held up very well. One of the support bars that the bikes rest on actually bent. The bike rack is supposed to be able to carry four bicycles and we only used it for two adult and a child’s bike. I am considering replacing it with a supporting design instead of this hanging design.

Etrailer Expert

Jenny N.

11/25/2022

I have reached out to Swagman about your experience with the bike rack. They wanted to know the makes and models of the bikes that you use with the rack. Also, I wanted to ask if you were using a bike adapter bar with any of the bikes?

Etrailer Expert

Jenny N.

12/2/2022

This bike rack is a good entry level rack however with a hanging bike rack it can be a challenge to maneuver 4 bikes to hang properly. With a mix of adult and childrens bikes using bike adapter bars with the childrens and womens bikes will allow them to hang easily. I have linked the bars that we carry below. You mentioned that a platform rack would suit your needs better. I recommend part # HR1400Z for you. As the 4 bike platform rack is a bigger rack I also have a 4 bike hanging rack that gives more space to hang the bikes on. It is part # Y02476.



by:

Swagman Trailhead 4 Bike rack on 2015 Nissan Xterra. Solidly built, easy to install and carry two mountain bikes. Stable at 75 mph and over bumps. An excellent value.

Allan

5/25/2018

The bike rack is very solid and easy to install. Weve enjoyed using it over a year. We just purchased a womans mountain bike for my wife and with the more sloped center bar, its a challenge to mount the bike. Others may also find this a problem.

Etrailer Expert

Rachael H.

5/29/2018

Thanks for the follow up. For alternative and bikes that do not have a standard horizontal crossbar we recommend using an adapter bar like # 64005. This will allow you to mount the bike in a more level position in your bike rack.


by:

Wow. This bike rack is solid. I have it installed on my truck for now and will move it to the back of our Jayco 1207 before our trip.

Chris B.

5/17/2018

Still loving my rack and lock.



by:

We use this bike rack extensively on the rear of our travel trailer. We carried 3-4 bikes for about 5,000 miles over 23 days without a single issue. The bike rack couldn't have performed better. I have a rear mounted camera that stays on while I drive down the road so I could actually see the bikes and rack to make sure they remained stable...and they did, even over some bumpy roads.

NOTE: trailer bumpers are not designed to hold anything other than a sewer hose. Visit a local welder to beef up your chassis and bumper before just simply adding a receiver hitch. You need to have a professional welder do this; pay the money...it will be worth it. Had a friend who's bike rack failed because the receiver wasn't properly mounted.

Etrailer Expert

Mike L.

11/2/2018

The strength of the rear bumper will typically depend on the metal its constructed of and how the bumper is welded. Typically a continuously welded steel bumper is pretty strong.



by:

Bike rack worked out very well. I had to buy a couple of additional hanging bars to compensate for a beach cruiser type bike to hang correctly.
Bike rack was assembled very well, it also has a non-rattle hitch pin which screws into the bike rack through the hitch.
The straps and holding bumpers are also well built. The holding bumpers rotate into 3 different positions to account for different frame types.

Johng

7/17/2017

Used it several times in the past year and am still fully satisfied.



by:

Works very good. I've used it many times on short trips and a few long trips over 150 miles.I was most impressed that when I first ordered the rack for my camper, I was told after it had arrived that the original rack would not work as intended and could fail under the right conditions. After reviewing other racks online I called customer service and was told the correct rack to buy and if I paid to send the original one back etrailer would send the right one to me with free shipping. That's what I call great customer service, Thanks again.

Edward

5/29/2017

It,s been a great bike rack with no issues, would definitely recommend to anyone looking for a bike rack to buy.



by:

We love our new bike rack!!! And since I bought the wrong kind to start with from another web site, the technical info I received from etrailer was the key in picking out one that would work on the back of our camper. So far it's been flawless....

Carl O.

8/12/2020

At the one year mark, we continue to be very pleased with our bike rack. while we havent used it with our camper as much as we would like, we did use it last month and it continues to be flawless.



by:

I purchased this to attach to my travel trailer. I haul 4 full size bikes on it every time we go camping and it hasn't failed me yet. I didn't send in a review because I wanted to put it to the ultimate test when we went on a 2500 mile round trip camping trip. This bike rack performed flawlessly. It's fairly easy to attach the bikes to it, even when there's 4 of them. The ONLY thing I am trying to upgrade is the lock washer that holds the bike rack to the hitch. With the bouncing weight of the bikes, the split lock washer smashes completely because I tighten it a LOT and it just can't take it. I'm looking for a flat washer that has teeth in it instead of the split washer. Overall though, this bike rack is fantastic! I would definitely recommend it and will buy it again if I need to.



by:

Sturdy product. Used for the first time recently behind a travel trailer, in the Adirondacks - New York. It held strong over bumpy mountain passes.
Very speedy delivery 3 days, to Canada, over July 1st and July 4th holidays.

Mike B.

7/28/2015

Its still going strong....Its handled lots of rain and some long hauls. Excellent product one year in...



by:

I should have watched the videos as the issues I have with the unit are now easily spotted.

(1) It is not easy to work a bike to the inner most mounting location. You're twisting and turning to get over and around the mounting brackets. (2) The bikes are held on by the main tube which also has brake lines running by. The brake lines are held to the tube in such a manner that any bump on the road will slightly twist the lines which rub against the tube and ultimately seem to stretch the brake lines.

On a positive side, the bikes are held out far enough to miss a bumper mounted spare tire.

Find an RV mount that supports bikes by the wheels.



by:

Nothing extravagant about the product. It does what is purchased for: transporting a bike via bike frame.

I had to get this for my fat bike did not fit on my bike rack platform. I saved money going with this and it does the job. It isn't as secure as some of the other options but to be fair those "security" options on products such as Thule aren't hard to bypass.

If you want security use a cable and/or chain and anchor it to the tow-hitch through the frame. Speaking of security the loading pin is nothing more than a bolt that I tighten using a wrench. So the form of security in that sense is the thief not having a wrench or at least not the right wrench to do the job.

So in the end it does what I need it to do. Nothing bad and nothing great about it, just right for the job. Like a meal that solves the issue of you being hungry, but isn't all that satisfying.



by:

Well built bike rack rated for 5th wheel. Great to do business with.

Kevin M.

9/23/2019

Great! The one exception is the locking, anti-rattle hitch pin. The head of the bolt is neither standard or metric. I have to put it on with a crescent wrench which works but not convenient. The videos state that either a 7/8 or 19mm socket will fit depending on which locking pin you purchase. 15/16 or 24mm is what actually fits the bolt. If a had a 23mm socket, it would probably be a better fit. Love the bike rack and the ability to lock it in place, just not happy that the bolt was not the size that was stated on the videos.

Etrailer Expert

Jon G.

9/30/2019

I wonder if you somehow received a different anti-rattle pin than what was supposed to be in the box. I just pulled this exact bike rack and checked the anti-rattle bolt to find that it fits a 7/8" socket.


by:

I bought this bike rack because it was the only one I could find that was rated for the back of a camper. I wanted a 2-bike rack, but this company only made a a4-bike rack, so my son very obligingly cut it down to a 2-bike size with pipe cutters. Kids are handy.....

So I’ve owned this bike rack for a year. I travel for three months in winter with my Scamp camper and the rack held up perfectly!! Superior product for sure. Dealing with Etrailer has been pleasant and professional. This year I ordered a bike cover from them. There was a short delay with the order and I received a call from the saleswoman about this matter just letting me know the expected delivery date and was that going to be a problem for me. It wasn’t, but i sure appreciated the call.

Am I happy with products and service? You bet!!! Great company.
Thanks, Etrailer!!



by:

My wife and I have been more than pleased with the bicycle rack purchases to be used primarily on the back of our 5th wheel. We have traveled from Kansas to Iowa, Nebraska, Minnesota, Wisconsin, without a speck of trouble, and have used it on the rear of my truck when traveling shorter distances from the campsite to get to trailheads. The fold down function is especially handy and prevents inadvertent head knockers when the trailer is at camp and the bicycles are not attached. The tie down straps are sturdy, and I would recommend this product to others.



by:

I bought this bike rack to use with a Curt Trailer Hitch Receiver Class III for a Crosstrek 2018. So far no issues, pleased with the purchase. I am also using the Swagman Anti-rattle Hitch/cable Lock, which was easy to install. My only complaints are 1) the pin that allows the top part of the rack to be folded becomes easily stuck when removing/inserting and 2) depending on the bike frame, it may not be possible to mount on this rack. Regarding number 2, I have a mountain bike that does not fit on the rubber cradles. I was able to remove the outermost cradles (they slide off after removing the safety screws) and placing the bike on the horizontal polls themselves (with some padding using rags and reinstalling the cradles to prevent bike from sliding). Overall these are minor comments and for the price I really can't complain.



by:

This product was recommended by etrailer for the back of a travel trailer for its stability. It attaches securely to the rear bumper and attaches to the hitch with a locking bolt. It is extremely stable and transfers easily to the back of my Jeep. Customer Service was excellent when I had some questions. They recommended I purchase the model that does not fold down side the travel trailer bounces so much. I traveled for 3 months with bikes in tow with no problems.



by:

Sturdy. Reason I didn't give it a 5 is because my Trek 8.1 male hybrid isn't a step through, but doesn't have a bar running parallel to the ground either... somewhere in between. Makes the bike a bit of a struggle to load past the rubber keepers. All my other bikes work great. Ok... so I copy and pasted the photo from Trek's site. But it illustrates my issue.

Bill K.

6/7/2016

Ive only used it twice in the past year. My Trek Hybrid doesnt fit well on it. My Giant road bike fits well.



by:

This is an excellent bike rack, with little or no swan on the back of a trailer. Do your a favor and research; the torque of a bicycle on the back of a trailer is different than that on a car. This type of rack is what you need if you are hauling back from your trailer, rv or fifth wheel. Best of luck!



by:

Great bike rack. I used it on the back of a rented Cruise America RV and drove over 1200 miles round trip including onto the Playa at Burning Man. We had 3 bikes one of which was a heavy electric bike and the rack worked perfectly. I did need to use a bar for the 2 girls bikes. One might have worked without it but it was borderline and I had purchased the bars just in case.

Great 4 bike rack for use on a RV (especially when the receiver is 2-3" under the bumper as most Cruise Am RVs are.)



by:

I received the product in excellent condition. I have used it once and have mixed reviews.
The bike cradles are not as good as those on my Yakima but I believe that they will work fine. The bike does rock more than I expected.
The assembly was straight forward but concerning. The main bolts in the base called for a 45 foot-pound torque spec. There were two bolts that needed to be installed. These torqued out very well. However the next sentence in the instructions were to ensure that all of the bolts were "tight". Given that the bolts were all the same size I assumed the 45 foot-pounds was also the target. The vertical tube is slightly buckled as it started to crush well before I hit 45 foot-pounds.



by:

After 3 trips (1,200 miles) have found this product to work well on our trailer. Pin on fold down top rack is an extremely tight fit which is great. Torqued the threaded hitch bolt and everything is still tight and no wiggle. I did remove the 4th bike holder so I have more space for our three bikes.... road bike, women’s 26” and girls 24”. Rick solid product. Arrived day 2 after order.



by:

I looked around for a long time for a sturdy bike rack to put on the back of my motorhome, because I already had 1 bike come loose from a popular brand name rack while only on my car. The Swagman 4 bike, 2" rack is very sturdy. The bolt really tightens it to the hitch. Although I wish it tilted down to be able to get into the diesel engine compartment to check fluids while the bikes are on. But I would rather have the security than the convenience. The double straps on each cradle are secure. Being able to rotate the cradles allow accommodation of a bunch of frame styles.

I bought the 4 bike rack to hold 3 bikes - 2 for me, 1 for the wife - so I removed the 4th cradle. That gives a lot of room. I'm not sure how you could put 4 bikes on the rack unless they were perhaps all road bikes.

I haven't actually been out on the road with it yet.



by:

This carrier has survived use on the back of our 5th wheel. Seems to be constructed well. I have only had 3 bikes on at one time though. Depending on the bikes frame configuration some are harder to get positioned due to the triangular rests.



by:

Ordered the Swagman Trailhead 4-bike rack on-line from e-trailer, best price I could find, plus they upgraded my shipping at no extra cost. The rack is very well made and works great behind my 5th wheel. I Would definitely recommend this bike rack and e-trailer.



by:

I ordered the Swagman 4-bike rack for 2" hitches. The sales person on the telephone was very courteous, and recorded my order and credit card information in a very friendly and efficient manner. And, as she stated, it was delivered very soon thereafter. I have already used this rack, and find it to be high quality, well built, strong, and suitable for my needs. I am very pleased with this etrailer.com experience, and will be a return customer in the future.


25
540
Show More Reviews

See what our Experts say about this Swagman RV and Camper Bike Racks

  • Recommended Hitch Receiver and Bike Rack for Use Behind Trailer
    Starting with the hitch receiver for your trailer, if you indeed have a 4 x 4 inch bumper, the Ultra-Fab # UF35-946401 that you referenced is what I recommend. This is designed to attach to 4 inch x 4 inch square bumpers with the included hardware and U-bolts. If you are just looking to use the 2 inch receiver for hitch-mounted accessories like bike racks, this is a great option and it will work well. Moving on to the bike rack, the Kuat Beta was a really nice 2-bike hanging-style rack,...
    view full answer...
  • Bumper-Mount RV Hitch for Use with Swagman RV-Rated Hitch Bike Rack S63381
    The Swagman Locking Anti-Rattle Threaded Hitch Pin # S64027 provides two functions. It has a threaded shank to match their 2-inch hitch bike racks and that can be tightened to reduce the play or wobble of the rack in the hitch. It also includes a key-operated lock that prevents removal of the threaded pin even if it were loosened with a wrench. We do offer 2-inch bumper-mount hitches that can allow use of a bike rack on an RV. All such 2-inch hitches are displayed on the linked page. These...
    view full answer...
  • Lightweight Bike Rack Recommendation for Use with Stromberg Carlson Bike Bunk
    The Swagman Trailhead 4-Bike Rack # S63381 weighs approximately 32 lbs; this leaves you with around 68 lbs or a little over 22 lbs per bike if carrying 3 bikes. As you mentioned, the Stromberg Carlson Bike Bunk # CC-275 has a 100 lb capacity, so carrying more than 2 or 3 bikes would likely put you over the limit. The only other RV approved rack that is more lightweight and can carry up to 3 bikes is the Swagman Original - 3 Bike Rack # S64152-2, weighing approximately 27 lbs.
    view full answer...
    Image 1 for
  • Class III Vs Class II Trailer Hitch For A 2021 Toyota RAV4 Hybrid
    The main reason you should use a class III hitch vs a class II hitch is that a class III hitch like the Curt Trailer Hitch Receiver # C13416 has a 2" x 2" receiver opening which is the most common opening used and manufactured, to carry hitch mounted accessories like the Swagman Trailhead 4-Bike Rack # S63381. Also, class II hitches are not made to be used with a weight distribution system, so if you wanted to use a WDS you'd have to install a class III hitch. That being said, there isn't...
    view full answer...
  • Bike Rack for a Forest River RPod Travel Trailer and a 2015 Buick Enclave
    You actually have several more options compared to the ones offered by Forest River for your RPod Travel Trailer. Since you only have a 150 pound weight capacity, you'll want to pick a lighter rack. I recommend the Swagman Trailhead, part # S63381. This is a hanging style rack that adjusts to a lot of different bike wheel sizes and setups, giving you a wide range of flexibility. This only fits a 2 inch receiver. Its capable of holding up to two 35 pound bikes with a 100 pound total...
    view full answer...
  • Recommended Trailer Hitch And Hitch-Mounted Bike Carrier For 2010 Toyota RAV4
    The hitch I recommend for your 2010 Toyota RAV4 is the Curt Trailer Hitch, part # C13149. This is a Class lll hitch and has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on a RAV4 you can take a look at. As the video shows, there is a measurement of about 6 inches from the hitch pin hole to the back of the spare tire cover. We will use that measurement for making a recommendation. I have attached a link to a helpful article that explains how...
    view full answer...
  • Does Hitch Install on 2017 Nissan Rogue Allow Handsfree Liftgate to Still Function
    The hands free liftgate sensor for your 2017 Nissan Rogue will still function with the installation of an aftermarket trailer hitch like the etrailer hitch part # e98846. However, you will need to place your foot on either side of the receiver tube opening in order to activate it. This is the case for most vehicles that have the hands free liftgate sensor. I attached an install video for this hitch for you to check out as well. For a hanging bike rack our most popular 4 bike rack is the...
    view full answer...
  • Recommended 4-Bike Rack For Use Behind Travel Trailer
    We certainly have some options for 4-bike racks that are confirmed for use behind a travel trailer. Since the manufacturers approve the racks for use behind a travel trailer, as long as the instructions are complied with, the warranty covers the racks being used behind a trailer. Only certain bikes have been tested and approved for use behind trailers, motorhomes, or RVs. The best option behind a trailer is to use an approved bike rack with a fixed frame, one that does not tilt down or...
    view full answer...
  • 5th Wheel Hitch and RV Bike Rack Installation on Heartland Big Horn 3610RE 5th Wheel
    Most likely the frames on the 2012 and 2014 model years of the Heartland Big Horn 3610RE 5th wheels are the same. But since RV makers typically don't provide those specs all you need to do is measure the space between the trailer's frame rails to find out if the Ultra-Fab hitch # UF35-946403 will fit. This hitch will fit for weld-on installation on I-beam, C-channel or rectangular trailer frames of widths from 47-1/8-inches out to 77-inches and it provides a tongue weight rating of 350-lbs,...
    view full answer...
  • Why is the Saris Freedom 4 Bike Rack Not Recommended for RVs?
    The reason why we don't recommend the Saris Freedom 4 Bike Rack # SA4414B on an RV, motorhome, flat-towed vehicle, or 5th-wheel trailer is because of the added torque experienced at the rear of those vehicles while traveling. The added force can damage the bikes, the rack, or the hitch receiver, and it can be dangerous for other drivers on the road. Since your bumper is customized for extra support and has a welded-on receiver, it should be better off than a bolted-on hitch. However, the...
    view full answer...
  • Inexpensive Trailer Hitch Mount Bike Rack for 4 Bikes on a 2002 Dodge Durango
    We have numerous 4-bike racks but for one that is neither large nor expensive I recommend looking at Swagman Trailhead # S63381. This is one of our most popular hanging racks becuase of the features, like anti-sway cradles and an anti-rattle hitch pin, without adding a lot to the price tag. I've linked a video for you to take a look at. Very small childrens bikes and bikes that have a step-through frame will need an adapter, # 64005. I have linked a video that shows how it works.
    view full answer...
  • 2-Bike Rack that Can be Used on a Travel Trailer and Vehicle and Fits 1-1/4 Inch and 2 Inch Hitches
    Because the ride at the back of a trailer is so much harsher than on a passenger vehicle a bike rack would have to meet certain structural requirements to be strong enough for that application. Some racks are but most are not. Curt bike rack # C18085 does not meet these requirements but I do have a solution for you. The Swagman Trailhead # S63381 is rated for use on a travel trailer. But it can only be used in a a 2 inch hitch. In fact all of our bike racks are currently (May 2022) only...
    view full answer...
    Image 1 for
  • Bike Rack Recommendation for use with Stromberg Carlson Bunk CC-275
    The bike rack we recommend the most with the Stromberg Bike Bunk part # CC-275 would be the Swagman Trailhead part # S63381. This rack is lightweight which will help when lifting the rack up into the bunk and it's rated for RV use which is important since the rack installs on the trailer.
    view full answer...
  • Solution for Swagman Bike Rack That Doesnt Clear Spare Tire of Winnebago View Motorhome
    Since there is already quite a bit of play at the back of an RV I can only imagine how much movement you are already seeing by using an extension at the back of your Winnebago View to haul the Swagman Trailhead 4-Bike Rack # S63381. An extension like what you are using only exaggerates the movement of an accessory it will be very difficult to make it so that your bike rack is pretty stable. For your application I recommend swapping out your Trailhead bike rack for the Thule Hitching Post...
    view full answer...
  • Trailer Hitch Receiver and 4-Bike Rack for 2016 Jeep Patriot
    The hitch I recommend for you is the etrailer Trailer Hitch Receiver # e98836 since it bolts to the existing holes in the frame of your 2016 Jeep Patriot and requires no drilling. It will give you a standard 2 inch receiver for a bike rack and its cross tube is hidden behind your bumper, so it looks nice and clean. For a 4 bike rack that is both budget friendly and very functional, your best option is the Swagman Trailhead 4-Bike Rack # S63381. Keep in mind that if any of your bikes have...
    view full answer...
    Image 1 for
  • Bike Rack Recommendation 2021 Forest River Flagstaff 25BRDS to Carry 3 Bikes
    For the rear of a travel trailer like the 2021 Forest River Flagstaff 25BRDS you'd need an RV approved bike rack like the Saris Trailhead RV # S63381 which is similar to the Apex you have now, can carry up to 4 bikes and has been reinforced for the rougher ride quality at the rear of a travel trailer like yours.
    view full answer...
  • 2-Bike Carrier for Casita 17-Foot Spirit Deluxe A-Frame Travel Trailer
    The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 will fit on A-frame trailers so long as the available free space on the frame allows installation at one of three specific outside-to-outside frame widths. Those widths are 12-, 32- and 52-inches as shown in the linked photo. These various fits are made possible by choosing how the angled legs are installed; either both inward, one inward or both outward. Please refer to the linked photo. If you confirm you have...
    view full answer...
    Image 1 for
  • Solution for Carrying Bike rack While Towing Lance 1575 Travel Trailer
    What I would recommend is to use the bike rack bunk part # CC-275 which attaches to the A-frame of the trailer to give you a hitch opening above the frame so that a bike rack like the Swagman Trailhead # S63381 can be carried. I attached a review video for this adapter for you to check out as well.
    view full answer...
  • Carrying 4 Bikes and a Hitch Mounted Cargo Carrier on an RV Trailer Hitch Receiver
    Using the Malone Dual Hitch Receiver # MPG544 will be difficult with a bike rack and cargo carrier. The bike rack will not give you much room for cargo on the carrier. Even if the bike rack's shank has a rise it'll only be 3 or 4 inches. You may be able to add a front mount hitch on your RV and then carry either the cargo carrier or bike rack on the front. Since an RV has a longer wheelbase than a typical vehicle not all accessories are designed to withstand the additional bouncing around...
    view full answer...
  • Bike Rack Recommendation for 4 Bikes on the Back of a Travel Trailer
    Most bike racks, the Hollywood Racks Sport Rider SE # HR1400Z included, are not built to withstand the stresses associated with being at the back of any type of trailer or RV. But there are some that you can use. For a 4-bike rack that you can use at the back of your trailer you can use the Swagman Trailhead # S63381 or the LongHaul # Y02476. Both would be great options. I have included links to videos for both of these racks and a link to all of the 4-bike options that are approved for...
    view full answer...
  • Bike Rack for 4 Bikes that Can be Used on the Back of an RV, Motorhome, Trailer
    There is more vibration, jarring, and movement in general at the back of an RV or trailer due to suspension limitations and the distance from the axle to the rear of the vehicle or trailer. Not all bike racks, the Sport Rider SE # HR1400Z included, are built to withstand this additional stress and will fail. For a 4-bike hitch mounted rack that can be used on the back of an RV or trailer we have the following options: Swagman Trailhead # S63381 Yakima LongHaul # Y02476 Swagman XP # S64940 Swagman...
    view full answer...
  • Recommended Bike Racks for Use on Class C Winnebago View RV
    RV-rated bike racks are made to withstand the extra stresses found at the rear of longer vehicles like a Class C Winnie View. Such RV bike carriers do not include a folding design since this would introduce a weak point, but some like the Swagman Trailhead # S63381 do have arms that fold. On the linked page, which displays all RV-rated bike racks we offer, you can view 2-bike carriers like the Curt # C18085. This lightweight (46-lb) rack has removable arms, offers an 90-lb total bike weight...
    view full answer...
  • Recommended Weight Distribution System For Trailer With 358 lb Loaded Tongue Weight
    For your 2010 Ford Flex and your trailer with 358 lb tongue weight, I recommend you get a weight distribution system rated for up to 600 lbs. The reason for this is any cargo behind the rear axle of your vehicle acts like tongue weight for your system and is added to your total tongue weight rating. This will give you adequate weight for your cargo as well as accommodate your trailer loaded tongue weight. For this system I recommend the Equal-i-zer Weight Distribution System w/ 4-Point...
    view full answer...
  • Recommended Trailer Hitch Receiver For Carrying Bike Rack With 2016 Keystone Passport Ultra Lite
    For your 2016 Keystone Passport Ultra lite Express 151ML I recommend the Curt Adjustable Trailer Hitch Receiver # C13701 which is designed to fit Box frames, C-Channel frames, or I-Beam frames that are between 18" - 51" wide and can be bolted on or welded on. This will give you a 2" trailer hitch receiver with a 500lb tongue weight rating, and 5000lb trailer weight rating allowing you to carry a bike rack. You will want to check with the manufacturer of your trailer to confirm the weight...
    view full answer...


< Previous
123. . .8



Do you have a question about this RV and Camper Bike Rack?


Used Items Available
Used Picture for Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches

Condition: Installed

Notes: Item has been installed/test fit.

Our Price: $191.02
Add to Cart
Secure Checkout

Info for this part was:

Employee Joe V
Installed by:
Joe V
Employee Rick A
Installed by:
Rick A
Employee Hayden R
Installed by:
Hayden R
Employee Leah B
Updated by:
Leah B
Employee Adele M
Updated by:
Adele M
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Noah M
Updated by:
Noah M
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew K
Video by:
Andrew K
Employee Patrick B
Video by:
Patrick B
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924