Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.
Features:
Specs:
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the side vents provide cross-ventilation for even more airflow. The angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out.
This MaxxAir II vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
The MaxxAir II vent cover is specifically designed for installation on 2015 and newer-model MaxxFan and MaxxFan Plus roof vents - no drilling or tools are required. The integrated mounting brackets on the MaxxAir II perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you're installing this cover over an older model MaxxFan or MaxxFan Plus roof vent without mounting tabs, no drilling is required, and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this MaxxAir II cover over any other roof vent, then drilling into the frame of the roof vent is required to mount the aluminum brackets. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
Average Customer Rating: 4.7 out of 5 stars (534 Customer Reviews)
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.Needed this to cover the vent in our horse trailers living quarters. Now we can keep it open, and the rain cannot get in. On those days at a show where I do not run the generator. Plus, when it is sitting will help the heat to escape. Husband was able to put this on with ease. Very happy with how fast it was delivered. It fit perfect.
REMINDER! Be sure to check dimensions before ordering! Not anyone's fault other than my own, but these were about 2" narrower at the base than the old, damaged ones I removed. Fortunately they are the same height, and the kit included new mounting hardware so replacement was not difficult and they function just fine. Delivery was actually a day earlier than expected. Very pleased with this purchase - both the product and the service.
Easy to install, and no more worries about raining inside when the air vents are cranked open.
Easy to install. Works well. Covers our bathroom vent opening. Keeps the rain out.
2 covers were in plastic bag's with hardware, 3rd cover no bag no hardware and crammed into box.Can you send the hardware for 3rd cover please, thank you.
Jenny N.
7/29/2023
We can get that hardware to you. I will have our Customer Service team reach out to you.
Fit form and function on the money. Really cut down on the heat coming through the original vent covers.
James
7/26/2023
Excellent results in knocking down the heat that had been coming through the standard vent cover. Very easy installation.
Put on top of MaxxAir fan on my Jayco Jay Feather 25RB so we can use it during rain. The outer flange on the fan frame is already prepped for this cover - installation took all of 5 minutes. Highly recommended.
Just what I needed to match my other two vent covers
Belisa C.
7/29/2023
Great!
Good price, product as described. Vent cover fits perfect with easy clip on attachment. I have used etrailer in the past and was very happy with those purchases also.
These work very well. I wouldn’t travel without them.
Jesse
11/26/2023
These things are working well. Don’t think I would have an Rv without them.
Fast shipping, great price and arrived in perfect condition.
Etrailer is a great company, great customer service and knowledgeable staff.
I ordered Max air 11 cover from them at better price than my distributor!
Highly recommend them.
We love these, we purchased to replace our original that was broken in a storm. They fit and work great. Would definitely recommend.
Great replacement part for my RPod, Went on so easily! Less expensive than Amazon Prime!
I have standard (non-MaxxAir) roof vents and their adapter brackets worked perfectly and the unit overall fits perfect. Like the MaxxAir II cover because you can pull 4 pins and lift it off to get to your roof vent if you need to. You can also open your vents about 90% which is more than we have ever opened them prior due to fear of wind damage. For me this is a MUST upgrade.
Ordered two and only received the hardware for one. Something like this happens every time I order something from etrailer. I should have known better.
Jenny N.
3/2/2023
I see that Customer Service was able to have the missing hardware sent out to you.
Once again shipped after order place and immediately taken to UPS. Your company is a model for what other companies could be. You have impressed me several times. You will be my go to store. Thanks for all that worked hard to deliver excellent service.
Item came in damaged today due to extremely poor packaging. Way to small of a box for this high height item that whoever packaged it just tried to make the narrow box stretch enough, leading to severe permanent distortion and cracking of the plastic on the vent cover. Sad. I also was surprise that there was absolutely no packing cushioning material or foam or bubble wrap around this item to prevent scratches. Been packaging for 35+ years in my collector car parts mail order business, with hardly ever any damage claims, so I know how to package items, and this is NOT how to prevent damage and wear to item! First of all, why wasn't this in a factory inner box of some kind for the vent cover? I'm guessing because you buy these in bulk, probably by the stack, and don't even get a factory box to put it in that would protect it and have a better presentation. I also would recommend not attaching the heavier metal brackets tightly with a zip tie to the vent area delicate support members by louvers, that could crack them, especially if box is pushed or set down in that area, that will push them against the delicate lovers. Their bag should be taped into the inner part of the vent, probably on the underside of top of vent, where no damage will happen. Needed to get this on for a trip using the RV this week; now I have to wait for a replacement, and not have for the trip and lots of time and hassles with calls, pictures, and waiting. Poor packaging work, cutting back trying to save a buck or two on time or materials, and not thinking how you are doing something have real world consequences for all involved folks. Hope you can do better on the replacement. Thanks.
Katrina B.
8/15/2022
We deeply apologize for your item showing up in such a bad condition. We rely on your feedback in order to better our shipping department, so this review is appreciated. I see that we have our customer service department working on getting this corrected for you.
Exact Fit and very easy installation.
We purchased these 6 months ahead of the arrival of our new trailer with 2 Max Air fans. At the time, no one had the transparent/smoke ones in stock, so we wanted to get ahead of supply chain issues. etrailer had them, and we received them quickly.
Had the trailer dealer install them and two others on the new trailer, so they could do any caulk work if needed. These are fantastic, in that you almost can't tell they are on the fan. A bit of tint, but otherwise crystal clear, and we never worry about leaving the vent covers open while travelling, or in inclement weather. etrailer is our go to for as many of our RV supplies as we can get from them, instead of the "A" company. Great customer service, good prices, and speedy shipping.
Great reliable service
Let's in a good amount of air. Let's my vent open wide. Stayed put in 50 mph winds.
Best price and so easy to install. I wasn’t sure if they were the right ones for my
camper I emailed and had an answer the same day!
Thank you!
Great product and etrailer was great to work with!!
Great customer service, shipping was excellent and a product easy to install
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Elizabeth G.
2/15/2023
We are still very happy with it.