RV Vent Roof Cover that Fits Fan-Tastic RV Roof Vent of 2022 Lance Truck Camper

Question

Question:

I have a Dometic Fantastic fan?. This is the factory roof vent that came with a 2022 Lance truck camper. It has the temperature control and 3 speed or knob. It does not look like there is an area to drill through to attach brackets. Is there a vent cover designed to snap on somewhere for the roof vent?

asked by: Mark

1

Helpful Expert Reply:

For the Fan-Tastic RV roof vents the correct vent cover is the part # FVU1500WH which comes with the needed hardware to install on your camper.

expert reply by: Jameson C

1

Answer 1

Assuming you have a standard 6-way plug and not the proprietary Lance plug on your camper you can use the #HM47085. This will plug into the 7-way on the bumper of your truck and connect to the 6-way on the camper. If you have the Lance plug, you will…

view full answer...

Answer 2

Hey Michael, it sounds like you're looking for the MaxxAir Standard Roof Vent Cover #MA00-933066. This cover goes over your existing Fantastic vent, and will let you use your vent in less than ideal weather like rain! This cover measures 20"…

view full answer...

Answer 3

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 4

I found the owner's manual for your 2019 Lance 850 and it does recommend to use 8 gauge wire with their proprietary connector. Using the 8 gauge wire from truck battery to the camper ensures you have adequate amperage to the accessories in your…

view full answer...

Answer 5

These are universal fits so yes, your Fan-Tastic vent is compatible with the MaxxAir II RV and Trailer Roof Vent Cover with EZClip #MA86JR. Since yours is an older Fan-Tastic model, you will need to drill screw holes in order to use this vent cover…

view full answer...

Answer 6

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 7

MaxxAir and Fan-Tastic Vent Fans are two different brands so you'd be better off with a cover like the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover #FVU1500BL or #FVU1500WH (white). The MaxxAir II RV and Trailer Roof Vent Cover w/…

view full answer...

Answer 8

The trailer hitch on the truck is what supports the extension. The extension is designed to fit in a 2-1/2 inch receiver (measuring on the inside) and the receiver part of the extension has a 2 inch receiver opening. The only thing you need for the…

view full answer...

Answer 9

The MaxxAir II Cover #MA86JR is a universal fit so it will fit a 14" x 14" Fan-Tastic Fan. The clamps are installed on the roof so it isn't brand-specific.

view full answer...

Answer 10

We have hitches that will fit your 2002 Ford F-350 but since you have a camper you'll need one that can be used with a hitch extender. For that you'd need the part #DT45508 which is a 2-1/2 inch hitch that would work well with a hitch…

view full answer...

Answer 11

Hello Rick, thanks for reaching out. I do have a solution for you, but there is no adapter for the 3 prong plug on your lance camper. Lance uses proprietary plug, so your best option is to replace it with a 7-way plug like the Hopkins 7-Way Blade…

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

RV Vent Roof Cover that Fits Fan-Tastic RV Roof Vent of 2022 Lance Truck Camper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching