Does MAXX AIR II Vent Cover # MA86JR Come with Bug Screen

Question

Question:

Does screens come on the 00933082 max air model

asked by: George

0

Expert Reply:

The MAXX AIR II Vent Cover # MA86JR also listed as part number 00933082 that you referenced does not come with a bug screen built into it nor is there one available for it.

expert reply by: Jameson C

0

Answer 1

No the MAXX AIR II Vent Cover #MA86JR that you referenced does not come with a bug screen built into it. Just the screen is not available as it does not separate.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

view full answer...

Answer 9

Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…

view full answer...

Answer 10

Hi Ryan! I see you ordered the DeeMaxx set already, but I still wanted to get you an answer to your question. The only real difference between the Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Galvanized #8-231-50UC1…

view full answer...

Answer 11

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 12

Hi Don! The MORryde ALLTREK 4000 #MR89DR can potentially add some height to your 2026 Alliance Avenue 32RLS. However, it really depends on the height of your existing equalizers. Since we know you have the CRE3000 like #MR87ZR the height of those…

view full answer...

Does MAXX AIR II Vent Cover # MA86JR Come with Bug Screen

Product Page this Question was Asked From

Continue Researching