bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 4.3 Inch Display
  6. Built-In Microphone
  7. Touch Screen
  8. Anti-Glare
  9. Mirrored Image
  10. Night Vision
  11. Motion Detecting
  12. Waterproof
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
Furrion

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

Part Number: FOS43TASF
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$465.58
Retail:$626.95
You Save: $161.37
RV Camera System
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Entegra Coach rv camera system experts, and offer a great price. etrailer.com carries a complete line of Furrion products for your Entegra Coach Qwest Motorhome 2020. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen part FOS43TASF from Furrion can be ordered online at etrailer.com. Complete rv camera system installation instructions and technical support.
  • All Info
  • Reviews (713)
  • Q & A (0)
  • Photos

Furrion RV Camera System - FOS43TASF

  • Backup Camera
  • Observation Camera
  • 4.3 Inch Display
  • Furrion
  • Built-In Microphone
  • Touch Screen
  • Anti-Glare
  • Mirrored Image
  • Night Vision
  • Motion Detecting
  • Waterproof
  • 1 Camera
  • Vision S Pre-Wired RVs
  • Wireless
  • Dashboard Mounting Bracket
  • Suction Cup Mount
  • Rear
  • Standard View

The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.


Features:

  • Wireless backup camera system improves rear-view visibility for your RV or camper
    • Minimizes blind spots and helps prevent accidents
  • Included CMOS camera creates clear digital video in full color
    • 120-Degree viewing angle gives you optimum visibility
    • Integrated motion sensors trigger the monitor to turn on
  • Integrated IR cut filter blocks out infrared light during the day to capture natural-looking images
    • 8 Infrared LEDs surround the camera lens to provide nighttime vision up to 16'
  • 4.3" Full-color LCD touch screen monitor has color-coded, rear assist marker lines that show distance from other objects
    • Auto-dimming, anti-glare screen is easy to see in any lighting condition
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Auto-off setting powers down the monitor after 10, 20, or 30 seconds
  • Integrated microphone and speaker make it easy to get help backing up
    • Microphone on camera picks up your friend's voice outside the RV
    • Speakers on monitor let you clearly hear your friend's instructions
  • Built-in digital transmitter offers high-quality, uninterrupted video up to 492' away
    • Eliminates interference from smartphones, routers, and other devices
  • Durable metal housing is waterproof and dust resistant
    • IP65-rated to protect against dust and low-pressure water jet sprays
  • Simple installation - minimal drilling required
    • Monitor suction cups to your windshield
    • Camera mounts to the rear of your RV or camper
  • 1 Camera, monitor, 1 monitor mount, 12V DC power cord, 6' camera power cable, antennas, zip ties, and mounting screws are included


Specs:

  • Monitor dimensions: 4-3/4" wide x 3-1/8" tall x 1" deep
  • Screen size: 4-5/16"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing (center to center):
      • Horizontally: 3-3/4"
      • Vertically: 15/16"
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.


After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.


Monitor the Rear of Your RV

If you're set up at the campsite for the weekend, the motion sensor will automatically power the touchscreen monitor on if they sense movement in the form of a prowling animal or person.


Easily Communicate from Outside Your RV

Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.


Avoid Collisions While Backing Up

No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.


Furrion RV Backup Camera Infrared LEDs

And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' should you arrive at the campsite after dark and need to back up into your parking spot. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.


Withstand Multiple Climates and Environments

If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.


Installs Onto Your Windshield and RV Rear


Furrion RV Backup Camera Monitor Suction Cup

This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.


Furrion RV Camera Installation

Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with the included mounting screws and connect to your RV's reverse lights. Be sure that the camera won't interfere with any slide outs or other moving components. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.



729125 Furrion Vision S Wireless RV Backup Camera System for RVs - Night Vision - 4.3" Screen

Replaces FOS48TAPK-BL

Replaces 729125

Alt 405211ET

Alt 110423

Installation Details FOS43TASF Installation instructions

California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

713 reviews
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
713
Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Why Does Furrion Vision S Camera Kit Require Adapter for Newer Chevy Truck
    For the newer GM trucks like your 2024 Chevy Silverado 2500 you do need to use the Furrion GM adapter part # FR87PR with the Furrion Observation Vision S systems like the part # FOS43TASF that you referenced. This is the adapter that the video you mentioned was referencing. The reason is that the running light circuit of your trailer wiring is what powers the camera but GM doesn't have enough power on the running light circuit to power the camera. So this adapter helps draw power from...
    view full answer...
  • What Backup/Observation Camera Do I Need for a 2017 Forest River Heritage Glen
    Yes, the Furrion RV Observation Camera System part # FOS05TASF is exactly the system that you will need to use the pre-wired backup camera mounting bracket on your 2017 Forest River Heritage Glen. The part # FOS43TASF that is listed on the bracket is the same version as the above but with a 4.3" screen instead of the larger 5" screen. They both use the same camera, so you won't have any issues. The camera will plug into the bracket you have installed now without any wiring required. Once...
    view full answer...
    Image 1 for
  • Can More than One Furrion Camera Pair to Furrion Monitor
    Yes, since the cameras pair to the monitor you can pair more than one to the same monitor with the Furrion RV Observation Camera System # FOS43TASF. For additional cameras we have the part # FCN48TASF.
    view full answer...
  • Why Would Furrion Vision S Side Cameras Light Up But No Camera Power On
    The side cameras of the Furrion Vision S systems have three wires that run to them. A ground, a light power circuit, and a camera power wire circuit. My guess is the camera wiring has not been complete and that's why they aren't powering on. See attached picture.
    view full answer...
    Image 1 for
  • Replacement Camera for Furrion RV Observation Camera System FOS48TA-BL
    I do have an option for you but replacement cameras for the Furrion RV Observation Camera System FOS48TA-BL are no longer available as they have been discontinued by Furrion. The Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF will not work. Therefore, your only option would be to upgrade to a new system, the Furrion RV Observation Camera System part # FOS43TASF. If you already have the pigtail for the mounting bracket wired on your trailer then you can reuse this which...
    view full answer...
  • How to Get the Furrion Vision S Camera System to Work with a 2023 Ford F-150
    Hey Peg, thanks for reaching out! Since your 2023 Ford F-150 has the PWM system then you'll just need to use the Power Adapter # FR87PR to get the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF to self-correct and work with your truck. Furrion came out with this solution when GM started using their PWM electrical setups in the trucks. What trailer are you using this for?
    view full answer...
  • Furrion Backup/Observation Camera Working Intermittently on Volkswagen Atlas
    It definitely sounds like the 12 volt trailer accessory circuit of your VW Atlas is at fault. This type of issue isn't uncommon for German vehicles as they make some of their circuits just more complicated. The easy solution is use the adapter part # C57003 which puts a bit more resistance on the circuit and will trick the vehicle into thinking there's a trailer connected and give the circuit the amperage and voltage more consistently.
    view full answer...
  • Weak/Intermittent Signal Error With Furrion Vision S Wireless RV Backup Camera System
    I took a look at the instruction manual for the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF which is attached below as well and there are a few possible causes of the weak/intermittent signal issues you are experiencing. I have listed these causes for you below as outlined in the manual. - Check if the camera antenna is fitted and secured correctly - it should be vertical. - Distance between camera and monitor is too great. Reduce distance between Camera and Monitor. -...
    view full answer...
  • Install Video for Furrion Vision s Observation System on Camper that is Not Pre-Wired
    I attached an install video for the Furrion Vision S part # FOS43TASF installed on an RV that was not pre-wired for the Furrion system but was able to easily tap into the wiring needed due to clearance lights being very close.
    view full answer...
  • Can A Truck Bed Camera Be Used With the Furrion RV Observation Camera System
    The Furrion RV Observation Camera System part # FOS43TASF which is a fit for your 2019 Keystone Montana 3121RL can be paired with side cameras like the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for increased visibility of the trailer but they currently do not offer a camera for the vehicle. I assume your 2019 Keystone Montana 3121RL has a pre-mounted bracket specially for the Furrion RV Observation Camera System so I recommend you use this system for your trailer...
    view full answer...
  • Is Furrion Vision S Camera Compatible with In-Dash Monitor on 2019 Chevy Silverado 2500HD
    While we do have camera options that link up to the in-dash monitor on your 2019 Chevy Silverado 2500HD (see linked selection), these are for the 3rd brake light. The Furrion Vision S system uses it's own monitor so you'll need to get one of the following kits to add it to your towing rig: 4.3" Monitor - # FOS43TASF or 5" monitor - # FOS05TASF. I recommend going with either the 5" monitor because the 4.3" option is only compatible with one camera. If you use the larger system, then you...
    view full answer...
  • Hitch, Wiring, Brake Controller, Camera, and Weight Distribution for 2015 BMW X5
    First thing you need to tow a trailer with your 2015 BWM X5 is a trailer hitch like the Curt # 13077 which is mostly hidden and had more than enough capacity for your trailer. Next for trailer wiring you'd want the part # 119250KIT to provide the 4-way lighting functions. To convert to a 7-way and install a brake controller you'd then want the part # ETBC7 with a brake controller like our Brake EVN # TK63VR which is proportional, reliable, and also priced well. For a camera setup for...
    view full answer...
  • Is There A Way To Clear Up A Blurry Image From A Furrion Vision S Rear Camera
    You've actually done everything you really can do to try and troubleshoot the blurry image from your rear camera so you are in the replacement phase now. Most likely the seals on it failed and allowed moisture to build up inside the lens causing the obstruction. Instead of having to repurchase the entire system you can get just the rear camera # FCN48TASF to save a bit of money. I've attached a short video below where Dave will walk you through replacing a bad rear camera to help walk...
    view full answer...
  • Troubleshooting Furrion Vision S Monitor and Camera Not Pairing
    A couple of things to check when trying to pair monitor to the camera for the Furrion Vision S # FOS43TASF. First make sure that the monitor is close enough to the camera. Next make sure that the camera is receiving power (indicated by LED light on camera). If it is then be sure to hold the pairing button on the camera for 2 seconds before pairing with the monitor. I have attached a clip from the troubleshooting section for the Vision S that you can use to try to get the monitor and...
    view full answer...
    Image 1 for
  • Troubleshooting Furrion Back Up Camera That Loses Signal After A Few Seconds
    Hello Carl, thanks for getting in touch. There are a few different reasons you could be having this issue with your Furrion backup camera. First, check and make sure the camera antenna is fitted correctly. It needs to be positioned vertically. It could be because there is too much distance between the camera and the monitor so reduce that if possible. There may also be interference from other electrical appliances that is affecting the wireless signal. Another thing to try is unpairing...
    view full answer...
  • How to Pair Furrion Wireless RV Camera to Monitor
    Try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.
    view full answer...
    Image 1 for
  • Recommended Camera System For Pre-Wired Forest River Trailers
    For your 2018 Forest River 197BH, I recommend the Furrion RV Observation Camera System w/ Monitor and Bracket # FOS43TASF. This camera is prewired in your trailer to function when you shift into reverse. It can be rewired to work anytime the running lights are on if you change the power wire location in your trailer to the running light circuit so you will have a constant view.
    view full answer...
  • Troubleshooting Furrion Vision S Camera Wont Pair 2019 GMC Sierra
    What truck do you have? Is it possibly a newer GM? They are known to have issues powering the Furrion cameras is why I ask.
    view full answer...
  • Furrion Camera Has Power but Won't Pair
    The biggest issue we see with the Furrion Vision S Wireless RV Backup Camera Systems like part # FOS43TASF comes from the wiring on the vehicle side, the running light circuit in particular. If it's less than 12 volts then the camera won't be able to pair. The fix for this is a built-in diode, the 12V PWM Filter for RV Backup Camera Systems part # VGR64VR. This is common on new Chevy vehicles and Mercedes.
    view full answer...
  • How To Stop Your Furrion Camera Monitor From Switching Out Of Tri-View Mode
    If you have your "Auto Display" function turned on in the settings of your Furrion Vision S Wireless RV Backup Camera # FOS43TASF then it will keep switching the view from Tri-Camera View. You can turn this off by completing the following steps: 1. Select Setup 2. Select Auto Display 3. Switch Auto Display to off Once this is complete it will stop backing out of Tri-View.
    view full answer...
  • Can Furrion Camera Connect to Smartphone for a Monitor
    The Furrion cameras, like what comes in the part # FOS43TASF that replaced the part you referenced, are only compatible with their specific monitors. If you are looking for a camera system that allows you to use your smartphone as the monitor then I recommend the Rear View Safety WiFi Backup Camera System # RVS-83112-WiFi. This connects to your iPhone through the free SafetyEye app (SafetyCam on Android) which allows you to record footage and save still shots to your phone or the app....
    view full answer...
  • Furrion Observation System # FOS48TAPK-BL to the New # FOS43TASF
    We now have the Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF. It was in the works for a while and has now replaced the previous model FOS48TAPK-BL. The differences are most notably in a motion detection sensor and the resolution on the screen as well as the transmission distance of up to 492 feet.
    view full answer...
  • Does Trailer Pre-Wired for Furrion System Have to Use Furrion System
    You don't absolutely have to use the Furrion Vision S system for your trailer that is pre-wired for Furrion systems, but there isn't one that will work without hardwiring like you wanted. So you would only be able to use one like the Drive # 324-000002 if you wired it into your running or reverse lights. For your pre-wired system, if you (understandably) don't want to do any wiring and want the easiest mount, you will need to stick with the Furrion Vision S system, of where there are...
    view full answer...
  • Troubleshooting Pairing Camera and Monitor with Furrion Digital Wireless System
    The Furrion Digital Wireless Backup Camera w/ Color LCD Monitor and Mounting Bracket - 4.3" Screen FOS48TAPK-BL being a wireless system may be experiencing some interference on the transmitting signal. You will also want to make sure that the trailer wiring for the camera is getting the power. Some systems are wired to the reverse light power in which case your trailer would need to be connected while the tow vehicle is shifted into reverse to sync. If you have the power wired into the...
    view full answer...


< Previous
123. . .41



Do you have a question about this RV Camera System?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Kathleen M
Installed by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Bradley B
Installed by:
Bradley B
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Adam Y
Updated by:
Adam Y
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Kevin C
Test Fit:
Kevin C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Thomas T
Video by:
Thomas T
Employee Matthew G
Video by:
Matthew G
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<