1157 LED Turn Signal Bulbs - Double Contact Bayonet - 411 Lumens - Amber - Qty 2
This item does not fit your vehicle
2014 Lexus GX 460
These items fit your vehicle
2014 Lexus GX 460
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily upgrade your factory turn signal bulbs with these amber 1157 LED bulbs. Compact bulb design prevents fitment or clearance issues. 15-mm Diameter, BA15d base.
Features:
Specs:
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. Stable lumens builds off the idea of effective lumens by measuring the amount of light produced after 30 minutes of usage, or once the diodes have reached their average operating temperature. These bulbs have a 600 raw lumen capacity per bulb and produce 411 effective lumens per bulb. The stable lumen capacity per bulb is 173 lumens.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everyone. I'm Ellen here at etrailer.com and we're going to be taking look at the replacement LED bulbs. These are going to be the one, one five, seven style bulb. So it fits in a lot of different vehicles, boats, RVs, really anywhere that you want to replace out your clearance light or your turn signal light on one of those vehicles.So let's take a closer look at this guy and make sure that it's the right fit for you. On the end here, you can see that it's going to be that double bayonet style connection point so it just pushes in and then turns into place. This should be similar to the size of your OEM bulbs so there shouldn't be much issue or any issue at all with the clearance or fitment of that bulb.
You see those two little points at the end there. I'm going to hook one of these up to power so you can see how bright that light is, and then I'll turn the lights out in the studio so you can get a better idea of that in the dark.So you can see our light comes on there. Turn out our studio lights, and that bulb does project out 360 degrees or all the way around the light and it's blinking just because I'm using these little alligator clamps to make that connection so as I move a little bit it disrupts the connection. So they're not the most reliable, but the lights are fine. It's just those alligator clamps that are weird.But as far as our lights, they are going to be IP67 rated.
So that means that they're going to be impervious to dust and waterproof. You shouldn't have any issues no matter where you're going to be using these, good for all kinds of terrain, they're also shock resistant. So should be a great addition to your vehicle to replace out your incandescent bulbs and get something a little nicer and longer-lasting. These are going to have a raw lumen output of 600, which is really more of the theoretical output for the lights, but in the real world, when they're actually measured, it's closer to 411 lumens. So that's going to be the effective lumen output.
That's really the number to pay attention to.After about 30 minutes of continued use, that does drop down to 173 lumens. But again, that's only if you're using these continuously and since they're for that amber light, or for your turn signal it doesn't really happen that often that you would be using these continuously for that long. So it shouldn't really have an effect on it. You'll have 23 diodes per bulb. It's going to be 18 around the side and then five up here at the top.
Color temperature is 1,600. So that's that amber color, as you saw. The wattage is 6.5 Watts per bulb. The power draw at 12 volts is 0.65 amps. Our voltage goes between nine and 16 volts DC. They are covered by a limited two year warranty, and that about does it for our look at these replacement LED bulbs. I hope this video has been helpful in deciding if this is the right pair for you. We do have a lot of other options available though here at etrailer.com so check them out. Thanks for watching.
Ratings & Reviews
Clark
10/1/2023
They are in our motorhome for front turn signals. Working good
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
11/28/2023
I have gotten in contact with the manufacturer and they have confirmed that the issue is called hyper flashing and is common among LED bulbs due to the resistance values being much lower. You can compensate for this with an inline resistor, like part # ARC22VR, with adds the necessary “load” to resolve this issue.