Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This spring-loaded pull pin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pull pin on your jack.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Micheal.: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the spring loaded pull pin for your fifth wheel landing gear. This is going to replace the standard pull pin on your jack for your fifth wheel landing gear. It is compatible with both the etrailer and the Ram fifth wheel landing gear jack. Basically, it's going to be a lot easier to use than your standard pull pin, because it is spring loaded it will remain attached to your jack so that when you need to raise or lower your jack, you can simply pull on the pin there and raise it up or lower it.
And then because it is spring loaded it will always go back into place. You're not going to have to worry about it coming loose. You're not going to have to worry about taking the pin out and setting it down, forgetting it somewhere or anything like that.This is going to remain attached to your jacks. It's going to be very convenient and very easy to use. The pin diameter is three eighths of an inch.
So, it will work with those three and three eights of an inch holes, and you can see the mounting bracket and all the hardware is included. So, it's going to be very easy to get that mounted in place and then use our spring loaded pull pin to make sure that our legs are locked out. That's going to complete our look at the spring loaded pull pin for your etrailer and Ram fifth wheel landing gear.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
David
6/30/2022
I like the pull pins which allow me to move my 5th wheel legs easily. The only negative has been the pins will pull out of the tubes because the clip inside is not sufficient to hold the sping and pin. I juist keep replacing them as needed, no warranty, Im on my 3rd set ... still like the concept.
Katrina B.
8/1/2022
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave
6/28/2025
One year in and the pins retract and fall back in their hole easily. No rust. The pin is easy to grasp.