Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System
(101 reviews)
Price: $33.18
In Stock
Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System
Item # LC362486
Retail:$49.04
Our Price: $33.18
You Save: 32%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (101)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC362486
- Camper Jacks
- Trailer Jack
- Jack Foot
- Lippert
Replaces the front foot pad for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817).
Features:
- Replaces the front foot pad for your Lippert Components Ground Control 3.0 electric leveling system (LC358590 or LC675817)
- Foot diameter: 9"
- Quantity: 1 front foot pad
377962 Replacement Front Foot Pad for Lippert Components Ground Control 3 Electronic Leveling System
Video of Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Components Trailer Jack LC362486 Review
Speaker 1: Today, we're gonna take a look at the replacement front foot pad for the Lippert components ground control 3.0 leveling system. Now this part will replace the front foot pad for your Lippert components ground control 3.0 electronic leveling system, part number LC358590. You can see this is a large, round foot plate, which will help prevent the jack from sinking into the ground. It includes one front foot pad and what makes this the front design is it accepts the square tube design. The diameter on this foot pad is gonna be right at 9" and the square tube inside diameter is gonna be right at 2". But that should do it for the review on the replacement front foot pad for the Lippert components ground control 3.0 leveling system..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- etrailer mistake
Customer Reviews
Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System - LC362486
Average Customer Rating: 4.8 out of 5 stars (101 Customer Reviews)
Replaces the front foot pad for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817).by: Wade06/10/2023
They are heavy, well made and a bit larger than the original rectangular feet. The powder coat will not allow them to rust as the OEM feet did. The square attachment point makes them more stable, which is why we wanted them. Attached easy with the original pins.
Together with the MORryde - SP54-180 - X-Brace 5th Wheel Stabilizer installed at the same time, the trailer is rock solid stable, no movement at all.
by: Troy10/13/2022
I have an older (2002) 5th wheel that had rectangular landing feet. I upgraded to these round ones so that I could utilize the round Anderson Blocks saving weight over my wooden landing pads, plus the Anderson Blocks are taller than traditional wooden blocks, which means less landing leg extension so the trailer is more stable and shakes less when set up.
by: George 06/19/2023
Fit perfectly on my front jacks and this enabled me to install snap pads.
by: Robert 11/05/2023
Great service and fantastic customer su pport.
by: Guy05/30/2018
Hello, I am very happy with this purchase to replace the original model that was on my fifth wheel. The round steel plate of 9 '' allows a good support. The price is very resonable
Guy
5/30/2019
After one of use I am still very satisfied, the product gives a good support for its size and shape and its strength. He is still like new.
by: Mark05/03/2019
The installation for the 9" round foot was easy and would have taken just a few minutes had I not had the strong arm system on my 5th wheel. I had to move the strong arm connection point up one hole to make room for the foot to attach on the bottom hole. You can see in the picture the top of the square covers the second hole from the bottom. Even though this foot is part of a system they fit over the standard 2" square landing gear tube. These feet with the strong arm system make a huge difference in stability.
by: Lawrence 10/11/2023
Great product. Fits as replacement per fectly.
by: Don S05/17/2019
Super easy to install, took all of 30 seconds each to replace. Way more stable that the floppy pads that came on our landing gear. Great investment. Because of their great customer service, I just wish etrailer carried Andersen 3608 jack blocks to use under them.
by: Tim 05/22/2023
They fit like they should. Did not have to make an mod.The only thing was the delivery was a little later then it was to be by a few days. Other then that its all good.
by: Danny 03/27/2023
These fit my camper perfectly and seems to be more stable than the previous rectangular foot pads.
by: Dennis06/11/2022
They fit perfectly love them
Dennis
6/12/2023
They are working great. I put them on the front landing gear of my 43’ 5th wheel trailer, I want to put them on the rest of the leveling stands
Mike L.
9/6/2023
@Dennis Good deal, we're glad to hear that the # LC362486 replacement feet are working well for you.
by: Todd10/11/2022
easy to install , no more carrying wooden boards around to put the feet on when camping , excellent product and will buy again when purchasing another fifth wheel
by: Jamie 07/23/2021
As described, fits perfectly on my 2x2 square jack legs
Jamie B.
7/24/2022
Was exactly what i wanted and works great
by: Robert 05/10/2023
Fast shipping. Product very well built. Would definitely recommend this product.
by: Stephen 04/24/2023
Great product, great service, would highly recommend the co,
by: Kenneth01/30/2019
Fits perfectly.
Kenneth
1/31/2020
No complaints.
by: Scott 05/18/2021
These parts fit my big tex trailer perfectly. Quick delivery of parts.
Scott E.
5/19/2022
After a year still working fine
by: Richard 04/06/2023
Very good service
by: Rosco05/21/2019
Item # LC362486, Replace the stock front landing pads on our 5th wheel camper.
The reason, the stock landing pads were bent. Many times i corrected the pads or rebend them back to there designed shape.
Item: LC362486, are made of heavy steel plate. These new pads when installed are a tight fit. They're easy to install and also helps stabilize the camper. I have use etrailer.com for several years, great products. Thanks
by: William05/01/2018
Exact replacement! Fast shipping. ETrailer is the FIRST and often the ONLY place I go for RV parts.
William W.
5/1/2019
Product is first class. Excellent OEM replacement
by: Greg 03/17/2020
These look and feel nice and heavy duty! I can't wait to change the stock feet out and put these on my 5th wheel. I feel these will be better for leveling, not sure, but I like the wider foot print on these.
by: Tim 01/27/2021
Arrived quickly. Packaged nicely. Ordered these to replace the rectangular feet on my fifth wheel so I can use the Andersen magnetic blocks for stability support. Have not installed them yet but dimensions say that it will work well.
by: Damon10/24/2018
These fit perfectly on my standard landing gear and are a great upgrade from the feet that bend the first time you unhook your camper. They have not bent at all, even when they were supporting the camper on gravel surfaces.
by: Larry 05/26/2021
I will use these on my fifth wheel camper so they will fit the andersen jack blocks that I bought to help stabilize the camper when set up.
25
101
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Diameter of Replacement Front Foot Pad for Lippert Components Ground Control 3.0 System LC362486Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 does indeed have a 9 inch diameter. I have linked a video review of it for you.
view full answer... - Recommended Landing Gear Foot Plate for 9 Inch Round Upgrade on 2016 Flagstaff Super Lite 5th WheelThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is compatible with your landing gear leg. The Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work for your system if the outer diameter is 2 inches by 2 inches at the foot and the pin diameter is 3/8 inch which is typical. I've attached a video to assist.
view full answer...
- Replacement Front and Rear Landing Gear Foot Pads for Lippert Ground Control SystemIf your 2011 KZ Stoneridge has the Lippert Ground Control System the part # LC362486 is the correct replacement for the front. For the rear you'd then want the part # LC377962. If you have a different landing gear system let me know and I'll see if we can help.
view full answer... - Foot Pad Replacement for Lippert Ground Control 2.0 OptionsThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is the original part for the Ground Control 2.0 system like you mentioned, but the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work if your square jacks will fit the 2 inch square measurement on this foot (see picture). I've attached a video with more info for you to check out as well.
view full answer...
- Replacement Larger Foot Pad for 2017 Jayco Eagle 5th Wheel Trailer JacksThe Replacement Front Foot Pad for Lippert Components Ground Control part # LC362486 is made specifically for the Lippert Components Ground Control 3.0 Leveling System which it does not sound like you have based on you saying you have rectangular foot pads now. That said, the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 would be a much better option because it has the wider footprint you are after and it will work with most power landing gear systems so it should...
view full answer... - Lippert Ground Control 2.0 Replacement Foot Pad RecommendationThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is the original part for the Ground Control 2.0 system, but the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work if your square jacks will fit the 2 inch square measurement on this foot. I've attached a video to assist.
view full answer... - Will The Lippert Foot Pad Fit on Von Weise Landing Gear? To determine if the Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667 will fit on your von weise landing gear I have some measurements you will need to verify are the same with your landing gear. These feet accept a 3/8" hitch pin and the tab is 1-1/2" long by 5/8" wide(see image). The Foot Pad # LC362486 is more likely to fit your landing gear. This pad is designed to have a 2" x 2" leg fit inside the collar and accepts the more common 1/2" pin. Be sure to verify your jack dimensions...
view full answer...
- How To Determine if Replacement Front Foot Pad Fits 5th Wheel TrailerAs long as your 2015 Eclipse Attitude has a Lippert Ground Control 3.0 installed on it (4 point or 6 point) like the # LC675817 the replacement foot pad part # LC362486 does fit and work well for the front leg. We don't have an install video that shows how this pad installs on the foot of a jack either. Basically all you do is line the hole up on the foot of the jack and then insert the snapper pin and clip it onto the other side of the pin and you're set.
view full answer... - Can Grade 8 Bolts Be Used to Replace the Snapper Pins on a Ground Control 3.0Yes you can absolutely use grade 8 bolts instead of the Replacement 3/8" x 3" Snapper Pin for Lippert Ground Control 3.0 Electric Leveling System # LC225598. You'll just want to make sure the bolts you use are the same 3/8" x 3" size as the original snapper pins.
view full answer... - Replacement Rear Landing Gear Foot Pad on Lippert Ground Control 2.0 Leveling SystemThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is the original part for the Ground Control 2.0 system, but the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work if your square jacks will fit the 2 inch square measurement on this foot. I've attached a video to assist.
view full answer... - What is Difference Between Landing Gear Feet From Lippert # LC362486 and # LC314667I wouldn't say # LC362486 fits a common landing gear leg as it was intended for the Lippert Ground Control leveling setups whereas the part # LC314667 was intended to fit the standard RV legs since it is different than the other kit. This attaches with a very standard horizontal pin type setup which most landing gear setups have.
view full answer... - Replacement Landing Gear Foot Pads for Lippert Ground Control 3.0 SystemLippert offers a replacement foot pad for the 3.0 Ground Control kits with the part # LC377962 for the rear and part # LC362486 for the front. These are both 9 inch diameter plates like what you referenced. The part number you mentioned does not fit the Ground Control though.
view full answer... - Replacement Foot Pads for the Lippert Ground Control 3.0 Electric 5th Wheel JackI found the foot pads you need for your Lippert Ground Control 3.0 Leveling System. For the rear jacks, you will need part # LC377962. These will be the foot pads that will fit the round tubes on the rear jacks. In case you ever need them , the front pads are # LC362486. These pads will fit the square tubes on the front 5th wheel jacks of the Ground Control System. The pin hole on the foot is 1/2 inch in diameter. You will need a 1/2 inch pin to secure the feet to the bottom of the jacks....
view full answer... - Replacement Foot Pad for Lippert Leveling System on 2014 Winnebago Vista KEFor your 2014 Winnebago Vista KE, I believe you have the leveling system and will want the Replacement Rear Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC377962 or the Front Foot Pad # LC362486. You may also want the replacement pin # LC225598.
view full answer... - Will Replacement Front Foot Pad LC362486 Fit he Landing Gear on a Carriage Lite 5th Wheel TrailerI might be able to figure out what type of landing gear came on your trailer if you can provide me with the full year, make, and model of the trailer. Replacement foot pad # LC362486 was designed to fit the Ground Control 3.0 systems such as # LC675817 or # LC358590 so if those look familiar then that is likely what you have. Something else that might help, the inner dimensions of the square part of the foot. For # LC362486 it is 2 inches square meaning the leg that fits inside would have...
view full answer... - Replacement Foot Pads for Lippert Level Up or Ground Control SystemsFor a replacement foot, I recommend the Replacement Rear Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC377962. For the front foot, I recommend the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486. The Level Up and the Ground Control are very similar systems with one being hydraulic and the other electric, but having the same foot pads. You will also want the replacement pin which is # LC225598.
view full answer... - Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Fit My Landing Gear LegsThe Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is designed for the Lippert Ground Control 2.0 Electric Leveling System. The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486 is designed for the Lippert Ground Control 3.0 Electric Leveling System. If you did have a Lippert Ground Control Electric Leveling System then most likely it would be the 3.0 and not the 2.0 therefore the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486...
view full answer... - 9 Inch Round Landing Gear Foot Pad 2007 Nu-Wa 5th WheelThe Lippert 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 should not be a problem with fitting as they are intended to fit most landing gear systems. The Ultra-Fab Spring-Loaded Quick Pins for Landing Gear Drop Legs # UF17-943032 are a great choice for your landing gear legs. These pins are 7/16 inch in diameter which is 1/16 difference between your landing gear hole. I don't believe a 1/16 difference will cause an issue while traveling.
view full answer... - What Size Tube Will The Lipper Replacement Foot Assembly Work With?I spoke with Lippert and they gave me the dimensions from the outside of the 2 mounting flanges on the Replacement Foot Assembly # LC157584 as 2-7/8"; so you'll need to use a 2-3/4" square tube to fit in between them and a 3" bolt. You could also use the Replacement Front Foot Pad # LC362486 which is for 2" x 2" tubes or the UltraFab # UF17-940006 which has 1-5/16" inner dimensions of the 2 mounting flanges.
view full answer... - Replacement Footpads for Lippert Ground Control 3.0 Leveling System on Jayco NorthstarFor replacement foot pads for the Lippert Ground Control 3.0 Leveling System # LC358590 you can use part # LC377962 (rear) and # LC362486 (front). These are sold individually. If you also need the snapper pin to secure the foot pad use part # LC225598, also sold individually.
view full answer... - Replacement Foot Pads for Lippert Ground Control 3.0The replacement foot pads for the Lippert Ground Control 3.0 # LC675817 (6-Point Set) or # LC358590 (4-Point Set) are different; the Replacement Rear Foot Pad # LC377962 has a circular receiver tube and the Replacement Front Foot Pad # LC362486 has a square receiver tube. Since you have the 6-point system and said you lost the left middle I believe you need the Front Foot Pad # LC362486.
view full answer... - Replacement Foot Pads for 2012 Heartland Elkridge 5th Wheel TrailerThe Lippert foot pad # LC314667 is a 9 inch diameter pad that is a fit for the automatic leveling systems. You may alternatively be interested in the rear foot pad # LC377962 or the front foot pad # LC362486. You may also want the Replacement 3/8" x 3" Snapper Pin # LC225598. If you do not have the Ground Control Auto Leveling system, then I recommend the Replacement Footpad and Pin for Stromberg Carlson Landing Gear # LG-119225 which fits most other landing gear system. The pad gives...
view full answer... - Replacement Foot Pads for Lippert Ground Control Leveling SystemThe Replacement Rear Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC377962 will work for your system as long as the both the front and rear tubes are round. In most cases the front tubes were square, so I do recommend confirming this on your coach. These are the correct replacement pads for the # LC358590 or # LC675817 systems. If your front jacks are square you would want to use part # LC362486 for those. If you also need the snapper pins, those can be replaced...
view full answer... - Replacement Landing Gear Parts For Lippert Ground Control On 2021 Keystone Sprinter 35BH 5TH WheelBased on images I could find it appears your 2021 Keystone Sprinter 35BH uses the Lippert Ground Control 3.0 Leveling System # LC358590. This would require the Replacement Leg # LC305340 which we do have the Jack # LC362485 and Foot # LC362486 available separately if you do not need a motor with the leg. If you are unsure if this is the system you have please take a photo of your landing gear along with the circuit board which controls it so I can verify if you have a different system.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Jenny M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Troy
10/13/2023
Still working great.