Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle - 20' Long

Part Number: LC359724

In Stock

$260.47

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

lippert rv sewer hoses drain waste master hose w/ leakproof camlock and 90-degree nozzle - 20' long

lippert rv sewer hoses 20 feet long lc359724

lippert rv sewer hoses drain 20 feet long

lippert rv sewer hoses drain 20 feet long waste master hose w/ leakproof camlock and 90-degree nozzle - 20'

Show All (22) Product Images

Show Fewer Product Images

In Use/Installed

0 rv sewer hoses lippert drain waste master hose w/ leakproof camlock and 90-degree nozzle - 20' long

0 rv sewer hoses lippert 20 feet long in use

0 rv sewer hoses lippert 20 feet long lc359724

0 rv sewer hoses lippert drain 20 feet long in use

Show All (14) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle - 20' Long customer photo

Show All (6) Customer Images

Show Fewer Customer Images

Videos

Lippert Waste Master RV Sewer Hose Review

Lippert Waste Master RV Sewer Hose Manufacturer Demo

Lippert Components RV Sewer - Hoses - LC359724 Review

Show All (3) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

With a leakproof camlock fitting and an easy-to-use nozzle with a shut-off valve, this extra-heavy-duty hose will make emptying your RV's holding tanks fast and easy. Camlock installs over your RV's existing waste valve. Great Prices for the best rv sewer hoses from Lippert. Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle - 20' Long part number LC359724 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (91)
Q & A (0)
Related Parts
Photos

Lippert RV Sewer Hoses - LC359724

Features:

Sewer hose lets you drain your RV's black-water and gray-water tanks at a dump station
- Easily handles the frequent use of full-time RV living
Leakproof camlock fitting replaces the standard lug fitting on your RV's waste valve
- 2 Locking arms prevent hose from disconnecting, ensuring a leak-tight seal
- Tethered plug covers the fitting when hose is not connected
Easy-to-use nozzle is permanently attached to hose for quick and clean setup
- 90-Degree angle allows for easy connection to sewer inlet
- Contoured rubber gasket creates an airtight seal with any size drain pipe
- Molded handle is easy to grip and carry
Shutoff lever on nozzle lets you start or stop the flow of waste
Clear window on the nozzle lets you see when your tank has been totally emptied
Smooth hose interior allows for easy cleaning
- Keeps waste from building up inside the hose
Durable, flexible TPV hose resists crushing, abrasion, punctures, and UV damage
- Bonded cuffs provide permanent, leakproof seals
- Exterior coil keeps hose from snapping back while extended
Storage cap keeps waste from leaking when the hose is stowed

Specs:

Hose diameter: 3"
Hose length:
- Extended: 240"
- Collapsed: 60"
1-Year limited warranty

The Waste Master from Lippert makes emptying your RV's holding tanks as easy as possible. The camlock fitting provides a tight, leakproof connection at your RV. An easy-to-use nozzle is comfortable to hold and lets you start and stop the flow of waste when you're at the sewer inlet. Finally, an extra-heavy-duty hose resists wear and damage while staying flexible. It's all designed to keep the waste contained until it goes down the drain.

Leakproof Camlock Fitting

Camlock fittings on the Lippert Waste Master

The Waste Master prevents any waste from escaping from your RV sewer setup. The trick is the leakproof camlock fitting. Unlike standard bayonet-and-lug fittings that can potentially leak, the camlock fitting that installs on your RV totally surrounds the Waste Master hose. When paired with the built-in seal, this makes for a leakproof connection.

Lippert Waste Master attached at the RV outlet

The camlock fitting, which replaces your RV's existing lug fitting, has 2 locking arms that prevent the hose from disconnecting from your RV. The arms also press against the fitting to create an even tighter seal, delivering even greater leak protection. After the hose is coupled inside the fitting, simply press down on each arm until they're both flush with the side of the outlet.

The Lippert Waste Master installs over your existing outlet

Upgrading your RV's existing bayonet-and-lug-style sewer outlet to the Waste Master's camlock fitting is simple. First, remove the cap from your existing fitting. Use a hacksaw to cut off the exterior bayonet tabs and then smooth the surface with sandpaper. Next, glue the camlock fitting onto your RV's outlet using ABS glue.

Easy-to-Use Nozzle with Built-In Shutoff

The permanently attached nozzle is designed to expel waste without making a mess. The handle's molded grip makes the nozzle - and hose - easy to carry, while also keeping your hands safely away from unsanitary drains. The 90-degree angle allows the nozzle to fit easily inside the drain pipe without sharply bending the hose. Plus, the contoured rubber gasket on the nozzle creates an airtight seal with sewer inlets of many different sizes, keeping nasty odors from escaping.

A clear window in the nozzle lets you see when the water in the hose runs clear, so you don't need any risky guesswork to be sure your tank is completely empty.

The nozzle also has a shutoff valve, so you can start or stop the flow of waste at any time. Simply pull the built-in lever up to open the valve, and push it down to close. "Open" and "closed" are clearly marked on the side of the nozzle to avoid any confusion. And because you can control the flow at the nozzle, you don't need an extra person to open or close the valve back at the RV while you're at the dump station.

Durable, Stay-Clean Hose

The Lippert Waste Master hose shown extended and compressed

Most RV sewer hoses have coils running along the inside where waste can get trapped, causing nasty odors and making the hose difficult to clean. But the Waste Master's inside is smooth, allowing waste to flow freely through the hose.

Also, the hose's durable and flexible TPV construction is resistant to crushing, abrasions, punctures, and UV rays, so it'll give you years of reliable use on your RV trips. Finally, the hose's large, strong end cuffs are securely bonded to prevent leaks between the hose body and the fittings.

359724 Lippert Components (LCI) Waste Master Waste Management System with Cam and Groove Fitting - Handheld Nozzle - Drain Master 20' Hose

Customer Satisfaction Score:

95% were satisfied with this product

5% of customers were not satisfied

Wrong item was ordered
Did not arrive in time

5% of customers were not satisfied

Wrong item was ordered
Did not arrive in time

4.8

91 reviews

5 Stars		(77)
4 Stars		(10)
3 Stars		(2)
2 Stars		(0)
1 Star		(2)

by: James 06/19/2025 One Year Later

This is the only sewer hose to own. Worth every penny, Never a leak, no smell, fully sealed system! Awesome!

Brooke M.

6/22/2025

If it ain't broke, don't fix it! Happy to hear you haven't had to shop around and this has been a tried and true solution for you :) Not something you want to have to worry about, for sure!

James One Year Later

6/19/2026

Great product! The only way to do a sewer hose, sealed system no leak.

by: Mike R. 06/12/2016 One Year Later

This is by far the best RV waste hose I have found on the market.
The head/valve assembly design is a little bulky (storage wise) but works very well.
I installed an additional block valve at the attachment point on the side of the coach along with the easy turn attachment. No more reaching underneath in awkward positions to pull the valve handle.
The payoff is no more nasty leakage at the attachment point. (See photo)
Happy drip free camping!

Click to Enlarge

by: Claude 05/21/2018

I had been looking for a hi quality drain hose when I saw this one. I ordered it and it exceeds my expectations. My problem with the standard slinky hose was . I would remove the cap on the drain valve, always some liquid would fall out of the cap on my gloves. Connect the hose put the ell in the hole.when I pull the slide valve the initial surge could make the hose jump causing a spill I couldn't be at both ends of the hose at the same time. With this new hose the camlock fitting is easy to open without getting wet. The valve at the output end allows me to controll the flow no more spills. The installation was easy cut off the pins on the bayonet connection sand and file for a good ABS joint and glue it on. I made up a camlock X bayonet adapter so I can use my macerator pump when I need to. I recommend this product.

Click to Enlarge

by: Flyknot Ranch 12/30/2020

I chose the Lippert Waste Master because of my familiarity with CAMlock fittings. I like the ease and perception that they create a tighter more reliable seal. I am pleased with hose, the fittings, and the ability to adapt them to the bayonet style of fitting. It has proven to be a very versatile system indeed.

Click to Enlarge

by: Ron 06/18/2019

This is an awesome system! Installation was straight forward and easy. I simply cut off the four locking posts on my rig, filed them flat to the pipe, cleaned with PVC solvent and glued on with ABS Cement. I wanted to cut off the old connector and replace with new black pipe, but I would of had to order the pipe at the cost of $56. It just wasn’t worth it.

Ron One Year Later

6/22/2020

Great!

by: Bruce W 05/10/2020 One Year Later

The hose works great and it obviously a well manufactured product. I had to install the new connector to my 2001 Airstream, a simple thing to do, and since then it’s worked flawlessly. I like the connector, easy to close but very secure. The valve at the other end and the clear section make it easy to see when the system is adequately flushed out. Well work the price.

Bruce W. One Year Later

5/11/2021

Great, I’m still very happy with it.

by: Captn John 03/18/2020 One Year Later

I've bought a lot of sewer hoses since 1976 and this is the best ever! I did NOT cut the nubs from my sewer, I cut them from an added an extra valve and cut them from that for 2 reasons, 1 is the Montana stays as it came from the factory and 2 it protrudes an extra 5 - 6 inches. The added length remains under the 5th but requires less reach and the extra valve is insurance against failure of any of the 2 black and 2 gray valves! This hose is built to last!
Due to the end nozzle being unable to fit in bumpers, but fewer bumpers on new campers anyway. However, the nozzle shut off and rear cap keeps 100% of any liquid in the hose! I keep it in a tub in the battery compartment, it is not very big when closed! I'll never go back!

by: Frank 05/23/2020 One Year Later

To date, have not had the opportunity to use this product. from careful inspection, of the unit, it appears to be made of high quality materials. I especially like the cam lock system, employed by Waste Master. More than once, I have had the conventional system separate, allowing waste to escape onto the ground. Another plus, with the Waste Master, is the lack of ribs, on the interior of the hose. Another plus, hose length is double that of standard sewer hoses, and folds down to 5-ft length. A no brainer.

by: Jim 01/11/2022 One Year Later

I converted my RV to 100% using the camlock system by permanently installing the camlock fittings on my sewer outlets. It is MUCH MUCH better than any of the leaky, fragile, difficult to connect bayonet fittings I've used before. This hose is very stout, but the major improvement is the camlock fittings. Once you use those, you'll never want to deal with the bayonet fittings again regardless of the manufacturer.

by: SSonnentag 07/17/2018

These last a full 16 months in the dry Arizona desert. Not bad at all. If I could figure out a way to keep it covered through the wind storms it would last much longer. I love having the valve built right into the hose. The only downside is that the rubber seal and short piece of pipe that attach to the sewer pipe at the camp site tend to separate from the valve when removing the valve. I had to use pliers to remove the piece of pipe and the rubber seal.

Ssonnentag One Year Later

7/17/2019

12 months of use and still going.

by: Mark 05/28/2024

This is the best sewer hose for camping. It does not develop pin holes easily like some.Coils back up and stays coiled. It's not going to uncool easily. In addition it attaches to you RV with a solid seal plug which is nice if you have arthritis. No lining up and twisting on to bayonet pins. If you have the bayonets, you will have to cut and sand them. Easy to do and well worth it. I had this on my previous motorhome and was surprised and excited that I could have it again. With the solid plug and hose, I thought it was designed for professional sewer pumpers ie: septic tank/ porti-johns. The other end seals nicely into the campground pipe, has a clear ring for visibility. The campground end also has a shut valve. After draining your tanks, disconnect at camper, put the red cap on the hose. Put the plug in the drain and clamp it. Shrink the hose towards the campground end. When compacted, close the valve. The closed pipe assists in reducing any odor and also reduces its ability to uncoil.

by: Rodney F. 10/23/2016 One Year Later

While the system is high quality, the seal at the outlet is JUST enough to prevent a leak during light use. It will not hold if you intend to use a maceration pump where the waste backs up a bit as it's being processed through the pump and leaks heavily. I've replaced the outlet and gasket at my expense only to get the same results. I called Lippert as well as the manufacturer on this who wouldn't help. So, in the end, for the 90% of the time I am at full hookup sites, it's fine. For the 10% where I'm on the road overnight or dry camping and want to dump at home with my macerator, it leaks.

by: Arch W 09/15/2019 One Year Later

WASTE MASTER sewage hose
Easy installation of waste water hookup point. Hose is effortless to hook up. Solid attachment. Flow control easy to handle. DW and I go to some campground every month so this hose has received its due in the first year of use. This piece of kit is extremely well made and shows NO wear whatsoever. Handles what ever you can give it! and then some.

by: Dustun R. 03/31/2017 One Year Later

This is by far the best sewer hose we have ever used. With a potential 20' it has yet to come up short at any campsite. The design, smooth inside, allows for quick and easy clean up prior to storage. Once you have mounted the firehose style connection to your sewer discharge you will never look back. Easy to install.

by: Excellent Product 05/26/2017

Waste Master RV Sewer hose with can lock fittings is a superior product to the old bayonet style sewer hoses. We had one on our Redwood 5th wheel and we're surprised to find the bayonet style on our new Tiffin motor home. Problem solved when we ordered the Waste Master Sewer hose from ETRAILER. Great prices, fast shipping and a happy customer gets ETRAILER.

by: Anthony 09/27/2018

Just received product. Looks as expected. The only issue is that there is no installation instructions (connection to RV must be permanently installed and glued on) and they are quite difficult to find on the web as well.

Haven’t use the product yet.

Mike L.

9/27/2018

If you scroll up on this page, you can see install details and photos.

by: Bobby 09/22/2016 One Year Later

Excellent product. Works functionally great, beats the dog eared drain connectors by far. It is strong plumbing material and see through valve is nice to verify clean water flow after flushing tank. Stores nicely. Will continue to use Waste Master on future RVs.

by: John 03/13/2018

Have received the new Waste Master Hose w/Camlock, Nozzle, and endcap. Reviewed this product from an article in Family Motor Coach Association magazine as well as installation procedures via YouTube. Have yet to install, however when the weather breaks I plan the installation. Thank you etrailer.

by: David 11/14/2020

We live full time in our Riverstone Legacy fifth wheel, it came with this sewer hose. It worked great for 3+ years, then it got a hole in it. I'm pretty sure the reason it got the hole is because we lived in SLC and it was in the snow for a good part of that time.
I had no hesitation ordering a new one because I felt it is a great product. We now live in St. George, Utah and we shouldn't have as much snow, but we will have some extreme heat, so we will see how it handles that. I plan on covering the exposed part to get it out of the direct sunlight.

by: David W 04/28/2017 One Year Later

Excellent product, easy on and off, no worries about broken ears on the twist lock type, keep red end cap to completely seal it after use and smooth interior means nothing hangs up, visual section lets you know when dumping or clean out is ending.

by: Rodney 12/23/2021 One Year Later

If you are tired of sewer hose leaks, smells and overall frustration, do yourself a favor and get this product. Been using it for a year now and still smiling. Far superior to stock RV/trailer assemblies.

by: James 06/29/2022 One Year Later

This is an oem product. Make sure of your connection type to your system. The door and receiver assembly was exact replacement to my original equipment.

by: Retired Ff 12/27/2019 One Year Later

Ordered the Lippert RV sewer hose. To have a solid connection plus a sewer line that was smooth on the inside. Short and to the point. the product works as advertised. solid connection solid non collapsing product.

by: Kevin 09/02/2021

Great product - just a longer time arriving than originally anticipated. [online store] had several sellers that could have gotten the product to me much faster. Have bought items before from etrailer and appreciate their great customer service.

by: James W 09/01/2017

Does not fit most RV / Trailer ! Too expensive to cut and install the adapter. Not much people using it in the market !!!

true

Show More Reviews

See what our Experts say about this Lippert RV Sewer Hoses

Do you have a question about this RV Sewer Hose?

Sewer Hose Recommendation for Lippert Waste Master System
You have the Lippert Waste Master Camlock Connector on your 2018 Forest River Forester so for a single hose setup you need the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 to dump your tanks. This comes with a 20' sewer hose but if you end up needing more length than that you can use the kit # LC360784 which comes with a dual Camlock Coupler and another 20' length of hose (when expanded). With that being said, it looks like the previous owners...
view full answer...
Recommended RV Waste Hose That Can Withstand Harsh UV Rays
The Camco RhinoEXTREME RV Sewer Hose # CAM39861 is one of the highest rated waste hoses on the market in terms of durability so it's a bit of shock that yours only lasted a year. The Dominator RV Sewer Hose # D04-0250 and Lippert Waste Master RV Sewer Hose # LC359724 would be the next best options on the market. Of the two options I prefer the Dominator, which has an 23-mil poly material that's durable enough to take some abuse and handle UV rays from the Sun.
view full answer...
How To Connect Lippert Waste Master RV Sewer Hose To RV Waste Valve
I have another option but there is not a Valterra shut off valve that has the camlock connector already installed to work with the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 you were looking at. Instead If your current shut off valve has a 3" bayonet spigot like the Valterra Double RV Waste Valves # TR38B you will need to cut the lugs off of the valve, use sand paper to smooth out the surface, and then use Valterra ABS Solvent Cement # A05-0303...
view full answer...
Is There a Bayonet Adapter for the Waste Master RV Sewer Hose Part # LC359724
It sounds like you are referring to the Lippert Components Tote Tank Adaptor part # LC360789. This adapter can be installed on the end of the Waste Master RV Sewer Hose part # LC359724 and provide you with a bayonet style fitting. The Waste Master is actually designed to replace the bayonet style fitting on your trailer but if you do not want to remove it you can use the Tote Tank Adaptor.
view full answer...
How to Merge Grey and Black Water Sewer Drains
The setup you have with two waste valves is going to require the tanks to be drained one at a time as they do not make a wye drain hose or wye camlock fitting for the Waste Master RV Sewer Hose part # LC359724. Typically, the point at which the black and grey water tanks merge for draining occurs at the valve with a sewer wye like the Double RV Waste Valve part # T38. I have attached a list of our sewer wye valves for you if you would like to change your setup so that the black and grey...
view full answer...
How To Replace Nozzle On The Lippert Waste Master Hose Kit
The Replacement Nozzle for Waste Master RV Sewer Hose with Seal Kit part # LC349521 is the replacement nozzle for the Lippert Waste Master RV Sewer hose kit part # LC359724. To replace the original nozzle with the Replacement Nozzle and connect it to the hose you will need to drive the two dowel pins out near the clear part of the nozzle. Once you have the dowel pins driven out you can swivel the nozzle until it comes off of the hose. The replacement nozzle kit LC349521 comes with the...
view full answer...
Recommend Storage for the Lippert Waste Master RV Sewer Hose
The Lippert Waster Master RV Sewer Hose, # LC359724, is designed to be stored in the under bin compartments of RVs. The hose and nozzle will not fit in the bumper style storage tubes. I do have a solution for you. The Valterra Viper RV Sewer Kit # D04-0475, has two 10 feet hose that can be connected to make a 20 foot section. The hose is made of a heavy-duty plastic that is puncture resistant. The kit also includes a detachable clear plastic 90-degree elbow. However, this brand sewer hose...
view full answer...
Adapter for Lippert Waste Master Sewer Hose System
You can potentially use the Lippert Components Tote Tank Adapter # LC360789 with the Double Female Cam Lock Fitting # LC363201 to accomplish what you are wanting to do. If you are looking for something smaller then you'll have to modify the drains on your Grand Design Imagine 2850MK so you can use your Waste Master # LC359724 and Extension # LC360784. The Waste Master connections are supposed to be superior to the bayonet fittings which is why you are supposed to not use the bayonet fittings...
view full answer...
Can Sewer Hose in Lippert Waste Master System be Trimmed Down Shorter
A sewer hose that is too long is an annoyance. One that is too short makes for a mess! It is possible to trim the hose down, remove the parts inside of the end that you cut, then use some solvent, # A05-0303, to "glue" the now shorter hose inside of the one end. Or you could cut a section out from the middle of the hose and use a coupler such as # F02-2025BK with the solvent above to secure both ends into the coupler. If you always need the same length hose then this is a viable option....
view full answer...
Can Holding tanks be Rinsed Using Lippert Sewer Hose
It sounds like you need something like the dual Flush Pro # CAM39062 for rinsing out holding tanks and the sewer hose. But these adapter uses bayonet fittings and hose # LC359724 uses cam-lock fittings. But if you used sewer hose # CAM39761 then with # CAM39062 you would be good to go. Or you might be interested in a more permanent solution such as the Tornado 360-Degree RV Holding Tank Rinser # CAM40126. This will install permanently and will be able to rinse out more areas of the tank...
view full answer...
Is Waste Master RV Sewer Hose Okay to Store in Bumper
Yes, the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long # LC359724 can be stored in your bumper without worry of the heat causing it to go bad. The only thing you need to have is the right amount of space to store the hose, which has a compressed length of 5 feet.
view full answer...
Availability of 10 Lippert Waste Master RV Sewer Hose
The Waster Master Hose is available in a 20' size part # LC359724. There is also a 20' extension available with part # LC360784. However, shorter lengths Waste Master hoses are not available. If you're open to a different brand, the following options are available in the length you want: - Easy Slip RV Sewer Hose w/ Pre-Attached Bayonet and Elbow Fittings and 4-in-1 Adapter - 10' Long # CAM39551 - Revolution RV Sewer Hose Kit w/ Swivel Fittings and Storage Caps - Brown - (2) 10' Long...
view full answer...
How Does Lippert Components 20 Ft Waste Master Extension Kit Fit to Other Sewer Hose
The Lippert Components 20 Ft Waste Master Extension Kit # LC360784 that you referenced does come with a union piece that connects it to the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long Item # LC359724. I attached a picture of it for you to check out.
view full answer...
Can the Waste Master RV Sewer Hose with Camlock Fittings be Used with Bayonet Fittings
Technically you could use the Tote Tank adapter # LC360789 with the Waste Master RV Sewer Hose # LC359724. But like you said the chance of leaks is greater since the adapter hose only has 2 bayonet fittings. I think the best option is to stick with bayonet fittings and use a hose such as # CAM39761 if you need a replacement.
view full answer...
Recommended Lippert Sewer Hose for Forest River Class C Motorhome
The Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long # LC359724 and the hose # LC360784 you referenced do not have to be extended to the 20 foot maximum for use. The compressed length of the hose is 5 feet long so you can utilize a shorter length of hose and it also helps for storage space. The 5 foot length is the shortest we offer for that Lippert system.
view full answer...
Would the Waste Master RV Sewer Hose Fit a 2008 Carriage Cameo
The industry standard for sewer pipes for RVs is 3 inch. What you have on your 2008 Carriage Cameo would be 3 inch like what the part # LC359724 is designed to fit.
view full answer...
Dimensions of Waste Master RV Sewer Hose LC359724
The Waste Master RV Sewer Hose # LC359724 uses a camlock fitting for connection to the motorhome's waste pipe. I went to our warehouse and measured the part shown in the linked photo. From both ends to the stop in the center measures 1-7/8-inches, so once you glue this on it will add approximately 2-1/2-inches to your drain pipe. The linked page will display all sewer-related parts and supplies including hoses. When you click on hoses you can choose the type of fittings you need.
view full answer...
Installation of Waste Master Sewer Hose System on a Tiffin Motorhome
There isn't a minimum amount of space listed as being required between the Waste Master female end and the pipe on the RV. That 1-1/4 inches you have will be sufficient for Waste Master system # LC359724. The overall length of the female fitting is approximately 4-3/8 inches. The proper glue to use will be an ABS solvent, # A05-0303. Apply it to both the female part of the Waste Master and the RV pipe. Push on the female end and rotate 90 degrees and hold it there for at least 30 seconds....
view full answer...
Overall Dimensions of the 90 Degree Elbow Part of Lippert Waste Master RV Sewer Hose # LC359724
I went out to the warehouse and pulled the Lippert Waste Master RV Sewer Hose # LC359724 to measure the 90 degree end with the lever and handle. The overall length from the furthest point forward to the end of the handle is 8 inches. The overall height is 10-1/4 inches. And it is approximately 4-3/4 inches thick. I have included a link to the manufacturer's demo video for you.
view full answer...
Extending Sewer Hose Drain Connection on a 1988 Holiday Rambler Alumalite
The overall width of the cam end of the Waste Master RV Sewer Hose # LC359724 is 5-5/8 inches with the cams closed. The hose is a standard 3 inch diameter hose. But it sounds like what you really need is an extension such as # CAM39572 which will extend the waste drain by 5 inches. There is also a 7 inch extension, # CAM39582, and a 9 inch extension # CAM39592. The will have the same outer diameter at the bayonets as the stock drain on the RV.
view full answer...
How to Plug the End of the Waste Master RV Sewer Hose Part # LC359724 for Storage
The only option I have for you to seal the end of the Waste Master RV Sewer Hose part # LC359724 while in storage would be to use an additional cap like part # LC360578 on the end of the hose opposite of the valve. Unfortunately, we do not have any way to plug the end of the house that houses the valve. The above cap is the same one that is attached to the sewer outlet on your RV.
view full answer...
Waste Master Sewer Hose Camlock Cylinder Diameter
The Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long # LC359724 has the cylinder camlock as you mentioned. This cylinder diameter is 3-1/2 inches inside and 4 inches on the exterior due to the fitting wall thickness of 1/4 inch. You will need to have 4-1/8 inches of clearance minimum.
view full answer...
Recommended RV Sewer Hose That Is Shorter Than 20 Feet Long
We do have just what you need. I recommend the RhinoEXTREME RV Sewer Hoses w Swivel Fittings, part # CAM39867. This comes with two 10-foot long hoses. You can use them together for a 20 foot long sewer hose or use just one hose for a 10-foot. This system also comes with a 4-in-1 adapter that will fit any size inlet at the dump station. The system also comes with 4 storage caps for the hoses.
view full answer...
Best Sewer Hose System for RV's
The best sewer hose system we offer is the Lippert Waste Master RV Sewer Hose part # LC359724. It has a handle for ease of use, leak-proof cam lock fittings for no mess, shut-off levels, clear windows, and much more. The hose is the standard 3" diameter so most pre-built storage compartments can accommodate this but the adapters may need to be stored elsewhere. I don't have any information on the store compartment of any one particular RV.
view full answer...

< Previous

Next >

Do you have a question about this RV Sewer Hose?

Info for this part was:

Video Edited:

Zack K

Video Edited:

Jacob T

Edited by:

Lindsey S

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Expert Research:

Jeffrey L

Installed by:

Cole B

Installed by:

Adam E

Video by:

Chris R

Written by:

Mary K

Updated by:

Wilson B

Updated by:

Alexander C

Updated by:

Halie H

Updated by:

Adam Y

Updated by:

Manda E

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.