Replacement Pull Pins for Atwood Landing Gear

Updated 10/19/2020 | Published 10/16/2020

Products Featured in This Question

Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear

(89)

$14.07

Spring-Loaded Pull Pins for Stromberg Carlson Landing Gear - Qty 2

(28)

$55.22

Landing Gear Set - 36-1/2" Lift - 8,000 lbs

(749)

$312.35

Question:

I have a Atwood 5th wheel landing gear on my jayco camper. The pull pin on the Atwood has two small pins that on go in 1 inch or two. Can I replace them with these etrailer pull pins

asked by: Richard L

Expert Reply:

I may have a solution for you, but I wasn't able to find any specs regarding your Atwood landing gear. With that said, the Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear # RVLG-SPP is designed for Landing Gear Set # RVLG-8000 which has a 2-1/2" square leg and a 5/8" pin diameter. If your Atwood landing gear are also this size then these would work.

You might also be able to use the Spring-Loaded Pull Pins for Stromberg Carlson Landing Gear # LG-119113, which is designed as a more universal fit and will work with landing gear that have a 2-1/4" square leg and a 7/16" diameter pin hole.

I've added a link to a video review for you to check out as well. If you've got something completely different from the measurements I've mentioned please let me know and I can look to see if we've got anything else that you might be able to make work.

expert reply by: Erik B